????
Your IP : 18.222.179.96
/* SPDX-License-Identifier: MIT */
/* Copyright (C) 2016-2018 B.A.T.M.A.N. contributors:
*
* Matthias Schiffer
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#ifndef _LINUX_BATMAN_ADV_H_
#define _LINUX_BATMAN_ADV_H_
#define BATADV_NL_NAME "batadv"
#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter"
/**
* enum batadv_tt_client_flags - TT client specific flags
*
* Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
* Bits from 8 to 15 are called _local flags_ because they are used for local
* computations only.
*
* Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with
* the other nodes in the network. To achieve this goal these flags are included
* in the TT CRC computation.
*/
enum batadv_tt_client_flags {
/**
* @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
*/
BATADV_TT_CLIENT_DEL = (1 << 0),
/**
* @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and
* the new update telling its new real location has not been
* received/sent yet
*/
BATADV_TT_CLIENT_ROAM = (1 << 1),
/**
* @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi
* interface. This information is used by the "AP Isolation" feature
*/
BATADV_TT_CLIENT_WIFI = (1 << 4),
/**
* @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
* information is used by the Extended Isolation feature
*/
BATADV_TT_CLIENT_ISOLA = (1 << 5),
/**
* @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from
* the table
*/
BATADV_TT_CLIENT_NOPURGE = (1 << 8),
/**
* @BATADV_TT_CLIENT_NEW: this client has been added to the local table
* but has not been announced yet
*/
BATADV_TT_CLIENT_NEW = (1 << 9),
/**
* @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it
* is kept in the table for one more originator interval for consistency
* purposes
*/
BATADV_TT_CLIENT_PENDING = (1 << 10),
/**
* @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
* part of the network but no nnode has already announced it
*/
BATADV_TT_CLIENT_TEMP = (1 << 11),
};
/**
* enum batadv_mcast_flags_priv - Private, own multicast flags
*
* These are internal, multicast related flags. Currently they describe certain
* multicast related attributes of the segment this originator bridges into the
* mesh.
*
* Those attributes are used to determine the public multicast flags this
* originator is going to announce via TT.
*
* For netlink, if BATADV_MCAST_FLAGS_BRIDGED is unset then all querier
* related flags are undefined.
*/
enum batadv_mcast_flags_priv {
/**
* @BATADV_MCAST_FLAGS_BRIDGED: There is a bridge on top of the mesh
* interface.
*/
BATADV_MCAST_FLAGS_BRIDGED = (1 << 0),
/**
* @BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS: Whether an IGMP querier
* exists in the mesh
*/
BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS = (1 << 1),
/**
* @BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS: Whether an MLD querier
* exists in the mesh
*/
BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS = (1 << 2),
/**
* @BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING: If an IGMP querier
* exists, whether it is potentially shadowing multicast listeners
* (i.e. querier is behind our own bridge segment)
*/
BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING = (1 << 3),
/**
* @BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING: If an MLD querier
* exists, whether it is potentially shadowing multicast listeners
* (i.e. querier is behind our own bridge segment)
*/
BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4),
};
/**
* enum batadv_nl_attrs - batman-adv netlink attributes
*/
enum batadv_nl_attrs {
/**
* @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
*/
BATADV_ATTR_UNSPEC,
/**
* @BATADV_ATTR_VERSION: batman-adv version string
*/
BATADV_ATTR_VERSION,
/**
* @BATADV_ATTR_ALGO_NAME: name of routing algorithm
*/
BATADV_ATTR_ALGO_NAME,
/**
* @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
*/
BATADV_ATTR_MESH_IFINDEX,
/**
* @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
*/
BATADV_ATTR_MESH_IFNAME,
/**
* @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
*/
BATADV_ATTR_MESH_ADDRESS,
/**
* @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
*/
BATADV_ATTR_HARD_IFINDEX,
/**
* @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
*/
BATADV_ATTR_HARD_IFNAME,
/**
* @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv
* interface
*/
BATADV_ATTR_HARD_ADDRESS,
/**
* @BATADV_ATTR_ORIG_ADDRESS: originator mac address
*/
BATADV_ATTR_ORIG_ADDRESS,
/**
* @BATADV_ATTR_TPMETER_RESULT: result of run (see
* batadv_tp_meter_status)
*/
BATADV_ATTR_TPMETER_RESULT,
/**
* @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
*/
BATADV_ATTR_TPMETER_TEST_TIME,
/**
* @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
*/
BATADV_ATTR_TPMETER_BYTES,
/**
* @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
*/
BATADV_ATTR_TPMETER_COOKIE,
/**
* @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
*/
BATADV_ATTR_PAD,
/**
* @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
*/
BATADV_ATTR_ACTIVE,
/**
* @BATADV_ATTR_TT_ADDRESS: Client MAC address
*/
BATADV_ATTR_TT_ADDRESS,
/**
* @BATADV_ATTR_TT_TTVN: Translation table version
*/
BATADV_ATTR_TT_TTVN,
/**
* @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
*/
BATADV_ATTR_TT_LAST_TTVN,
/**
* @BATADV_ATTR_TT_CRC32: CRC32 over translation table
*/
BATADV_ATTR_TT_CRC32,
/**
* @BATADV_ATTR_TT_VID: VLAN ID
*/
BATADV_ATTR_TT_VID,
/**
* @BATADV_ATTR_TT_FLAGS: Translation table client flags
*/
BATADV_ATTR_TT_FLAGS,
/**
* @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
*/
BATADV_ATTR_FLAG_BEST,
/**
* @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
*/
BATADV_ATTR_LAST_SEEN_MSECS,
/**
* @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
*/
BATADV_ATTR_NEIGH_ADDRESS,
/**
* @BATADV_ATTR_TQ: TQ to neighbour
*/
BATADV_ATTR_TQ,
/**
* @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
*/
BATADV_ATTR_THROUGHPUT,
/**
* @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
*/
BATADV_ATTR_BANDWIDTH_UP,
/**
* @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
*/
BATADV_ATTR_BANDWIDTH_DOWN,
/**
* @BATADV_ATTR_ROUTER: Gateway router MAC address
*/
BATADV_ATTR_ROUTER,
/**
* @BATADV_ATTR_BLA_OWN: Flag indicating own originator
*/
BATADV_ATTR_BLA_OWN,
/**
* @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
*/
BATADV_ATTR_BLA_ADDRESS,
/**
* @BATADV_ATTR_BLA_VID: BLA VLAN ID
*/
BATADV_ATTR_BLA_VID,
/**
* @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
*/
BATADV_ATTR_BLA_BACKBONE,
/**
* @BATADV_ATTR_BLA_CRC: BLA CRC
*/
BATADV_ATTR_BLA_CRC,
/**
* @BATADV_ATTR_DAT_CACHE_IP4ADDRESS: Client IPv4 address
*/
BATADV_ATTR_DAT_CACHE_IP4ADDRESS,
/**
* @BATADV_ATTR_DAT_CACHE_HWADDRESS: Client MAC address
*/
BATADV_ATTR_DAT_CACHE_HWADDRESS,
/**
* @BATADV_ATTR_DAT_CACHE_VID: VLAN ID
*/
BATADV_ATTR_DAT_CACHE_VID,
/**
* @BATADV_ATTR_MCAST_FLAGS: Per originator multicast flags
*/
BATADV_ATTR_MCAST_FLAGS,
/**
* @BATADV_ATTR_MCAST_FLAGS_PRIV: Private, own multicast flags
*/
BATADV_ATTR_MCAST_FLAGS_PRIV,
/* add attributes above here, update the policy in netlink.c */
/**
* @__BATADV_ATTR_AFTER_LAST: internal use
*/
__BATADV_ATTR_AFTER_LAST,
/**
* @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
*/
NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
/**
* @BATADV_ATTR_MAX: highest attribute number currently defined
*/
BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
};
/**
* enum batadv_nl_commands - supported batman-adv netlink commands
*/
enum batadv_nl_commands {
/**
* @BATADV_CMD_UNSPEC: unspecified command to catch errors
*/
BATADV_CMD_UNSPEC,
/**
* @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
* device
*/
BATADV_CMD_GET_MESH_INFO,
/**
* @BATADV_CMD_TP_METER: Start a tp meter session
*/
BATADV_CMD_TP_METER,
/**
* @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
*/
BATADV_CMD_TP_METER_CANCEL,
/**
* @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
*/
BATADV_CMD_GET_ROUTING_ALGOS,
/**
* @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
*/
BATADV_CMD_GET_HARDIFS,
/**
* @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
*/
BATADV_CMD_GET_TRANSTABLE_LOCAL,
/**
* @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations
*/
BATADV_CMD_GET_TRANSTABLE_GLOBAL,
/**
* @BATADV_CMD_GET_ORIGINATORS: Query list of originators
*/
BATADV_CMD_GET_ORIGINATORS,
/**
* @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
*/
BATADV_CMD_GET_NEIGHBORS,
/**
* @BATADV_CMD_GET_GATEWAYS: Query list of gateways
*/
BATADV_CMD_GET_GATEWAYS,
/**
* @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
*/
BATADV_CMD_GET_BLA_CLAIM,
/**
* @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance
* backbones
*/
BATADV_CMD_GET_BLA_BACKBONE,
/**
* @BATADV_CMD_GET_DAT_CACHE: Query list of DAT cache entries
*/
BATADV_CMD_GET_DAT_CACHE,
/**
* @BATADV_CMD_GET_MCAST_FLAGS: Query list of multicast flags
*/
BATADV_CMD_GET_MCAST_FLAGS,
/* add new commands above here */
/**
* @__BATADV_CMD_AFTER_LAST: internal use
*/
__BATADV_CMD_AFTER_LAST,
/**
* @BATADV_CMD_MAX: highest used command number
*/
BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
};
/**
* enum batadv_tp_meter_reason - reason of a tp meter test run stop
*/
enum batadv_tp_meter_reason {
/**
* @BATADV_TP_REASON_COMPLETE: sender finished tp run
*/
BATADV_TP_REASON_COMPLETE = 3,
/**
* @BATADV_TP_REASON_CANCEL: sender was stopped during run
*/
BATADV_TP_REASON_CANCEL = 4,
/* error status >= 128 */
/**
* @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or
* didn't answer
*/
BATADV_TP_REASON_DST_UNREACHABLE = 128,
/**
* @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
*/
BATADV_TP_REASON_RESEND_LIMIT = 129,
/**
* @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node
* already ongoing
*/
BATADV_TP_REASON_ALREADY_ONGOING = 130,
/**
* @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
*/
BATADV_TP_REASON_MEMORY_ERROR = 131,
/**
* @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
*/
BATADV_TP_REASON_CANT_SEND = 132,
/**
* @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
*/
BATADV_TP_REASON_TOO_MANY = 133,
};
#endif /* _LINUX_BATMAN_ADV_H_ */