????
Your IP : 3.145.12.100
#ifndef _LINUX_VIRTIO_NET_H
#define _LINUX_VIRTIO_NET_H
/* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of IBM nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE. */
#include <linux/types.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
#include <linux/virtio_types.h>
#include <linux/if_ether.h>
/* The feature bitmap for virtio net */
#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */
#define VIRTIO_NET_F_MTU 3 /* Initial MTU advice */
#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
* network */
#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
* Steering */
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
#define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device
* with the same MAC.
*/
#define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */
#ifndef VIRTIO_NET_NO_LEGACY
#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
#endif /* VIRTIO_NET_NO_LEGACY */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
struct virtio_net_config {
/* The config defining mac address (if VIRTIO_NET_F_MAC) */
__u8 mac[ETH_ALEN];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
__u16 status;
/* Maximum number of each of transmit and receive queues;
* see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
* Legal values are between 1 and 0x8000
*/
__u16 max_virtqueue_pairs;
/* Default maximum transmit unit advice */
__u16 mtu;
/*
* speed, in units of 1Mb. All values 0 to INT_MAX are legal.
* Any other value stands for unknown.
*/
__u32 speed;
/*
* 0x00 - half duplex
* 0x01 - full duplex
* Any other value stands for unknown.
*/
__u8 duplex;
} __attribute__((packed));
/*
* This header comes first in the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header.
*
* This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
* only flattened.
*/
struct virtio_net_hdr_v1 {
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */
#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */
__u8 flags;
#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */
#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */
#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */
#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */
#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */
__u8 gso_type;
__virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
__virtio16 gso_size; /* Bytes to append to hdr_len per frame */
__virtio16 csum_start; /* Position to start checksumming from */
__virtio16 csum_offset; /* Offset after that to place checksum */
__virtio16 num_buffers; /* Number of merged rx buffers */
};
#ifndef VIRTIO_NET_NO_LEGACY
/* This header comes first in the scatter-gather list.
* For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
* be the first element of the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header. */
struct virtio_net_hdr {
/* See VIRTIO_NET_HDR_F_* */
__u8 flags;
/* See VIRTIO_NET_HDR_GSO_* */
__u8 gso_type;
__virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
__virtio16 gso_size; /* Bytes to append to hdr_len per frame */
__virtio16 csum_start; /* Position to start checksumming from */
__virtio16 csum_offset; /* Offset after that to place checksum */
};
/* This is the version of the header to use when the MRG_RXBUF
* feature has been negotiated. */
struct virtio_net_hdr_mrg_rxbuf {
struct virtio_net_hdr hdr;
__virtio16 num_buffers; /* Number of merged rx buffers */
};
#endif /* ...VIRTIO_NET_NO_LEGACY */
/*
* Control virtqueue data structures
*
* The control virtqueue expects a header in the first sg entry
* and an ack/status response in the last entry. Data for the
* command goes in between.
*/
struct virtio_net_ctrl_hdr {
__u8 class;
__u8 cmd;
} __attribute__((packed));
typedef __u8 virtio_net_ctrl_ack;
#define VIRTIO_NET_OK 0
#define VIRTIO_NET_ERR 1
/*
* Control the RX mode, ie. promisucous, allmulti, etc...
* All commands require an "out" sg entry containing a 1 byte
* state value, zero = disable, non-zero = enable. Commands
* 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
* Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
#define VIRTIO_NET_CTRL_RX 0
#define VIRTIO_NET_CTRL_RX_PROMISC 0
#define VIRTIO_NET_CTRL_RX_ALLMULTI 1
#define VIRTIO_NET_CTRL_RX_ALLUNI 2
#define VIRTIO_NET_CTRL_RX_NOMULTI 3
#define VIRTIO_NET_CTRL_RX_NOUNI 4
#define VIRTIO_NET_CTRL_RX_NOBCAST 5
/*
* Control the MAC
*
* The MAC filter table is managed by the hypervisor, the guest should
* assume the size is infinite. Filtering should be considered
* non-perfect, ie. based on hypervisor resources, the guest may
* received packets from sources not specified in the filter list.
*
* In addition to the class/cmd header, the TABLE_SET command requires
* two out scatterlists. Each contains a 4 byte count of entries followed
* by a concatenated byte stream of the ETH_ALEN MAC addresses. The
* first sg list contains unicast addresses, the second is for multicast.
* This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
* is available.
*
* The ADDR_SET command requests one out scatterlist, it contains a
* 6 bytes MAC address. This functionality is present if the
* VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
*/
struct virtio_net_ctrl_mac {
__virtio32 entries;
__u8 macs[][ETH_ALEN];
} __attribute__((packed));
#define VIRTIO_NET_CTRL_MAC 1
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
/*
* Control VLAN filtering
*
* The VLAN filter table is controlled via a simple ADD/DEL interface.
* VLAN IDs not added may be filterd by the hypervisor. Del is the
* opposite of add. Both commands expect an out entry containing a 2
* byte VLAN ID. VLAN filterting is available with the
* VIRTIO_NET_F_CTRL_VLAN feature bit.
*/
#define VIRTIO_NET_CTRL_VLAN 2
#define VIRTIO_NET_CTRL_VLAN_ADD 0
#define VIRTIO_NET_CTRL_VLAN_DEL 1
/*
* Control link announce acknowledgement
*
* The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
* driver has recevied the notification; device would clear the
* VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
* this command.
*/
#define VIRTIO_NET_CTRL_ANNOUNCE 3
#define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
/*
* Control Receive Flow Steering
*
* The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
* enables Receive Flow Steering, specifying the number of the transmit and
* receive queues that will be used. After the command is consumed and acked by
* the device, the device will not steer new packets on receive virtqueues
* other than specified nor read from transmit virtqueues other than specified.
* Accordingly, driver should not transmit new packets on virtqueues other than
* specified.
*/
struct virtio_net_ctrl_mq {
__virtio16 virtqueue_pairs;
};
#define VIRTIO_NET_CTRL_MQ 4
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
/*
* Control network offloads
*
* Reconfigures the network offloads that Guest can handle.
*
* Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit.
*
* Command data format matches the feature bit mask exactly.
*
* See VIRTIO_NET_F_GUEST_* for the list of offloads
* that can be enabled/disabled.
*/
#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5
#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0
#endif /* _LINUX_VIRTIO_NET_H */