????
Your IP : 3.133.109.141
import os
import pprint
import signal
import socket
import socketserver
import sys
import threading
import time
import traceback
import pickle as pickle
try:
import readline # Imported to _enable_ command line editing
except ImportError:
pass
import select
import queue
from guppy.heapy.RemoteConstants import *
from guppy.heapy.Console import Console
from guppy.sets import mutnodeset
from guppy.etc.etc import ptable
from guppy.etc import cmd
class Server(socketserver.ThreadingTCPServer):
pass
def ioready(fd, wait):
r, w, x = select.select([fd], [], [], wait)
return len(r)
def queue_get_interruptible(q, noblock=0):
while 1:
try:
return q.get(timeout=0.2)
except queue.Empty:
if noblock:
break
# Special value signals that connection has been closed
CONN_CLOSED = ('CLOSED',)
class Handler(socketserver.StreamRequestHandler):
allow_reuse_address = 1
def close(self):
if not self.isclosed.tas(0):
self.server.monitor.remove_connection(self)
self.dataq.put(CONN_CLOSED)
self.request.shutdown(2)
self.request.close()
def send_cmd(self, cmd):
if not cmd.endswith('\n'):
cmd += '\n'
self.request.send(cmd.encode('utf-8'))
def browser_cmd(self, cmd):
if self.prompt == '>>> ':
self.exec_cmd('q', retdata=1)
if self.prompt == '<Annex> ':
self.exec_cmd('cont', retdata=1)
return self.exec_cmd(cmd, retdata=1)
def exec_cmd(self, cmd, retdata=0, noblock=0):
if cmd is not None:
self.send_cmd(cmd)
self.promptstate = False
datas = []
while 1:
p = queue_get_interruptible(self.dataq, noblock)
if p is None:
if self.promptstate:
break
else:
time.sleep(1)
continue
if p is CONN_CLOSED:
raise EOFError
if p[0] == 'DATA':
self.promptstate = False
if retdata:
datas.append(p[1])
else:
sys.stdout.write(p[1])
elif p[0] == 'PROMPT':
self.prompt = p[1]
if self.dataq.empty():
self.promptstate = True
break
else:
self.promptstate = False
else:
assert 0
if retdata:
return ''.join(datas)
def get_ps(self, name):
for line in self.firstdata.split('\n'):
if line.startswith(name):
if '=' in line:
ix = line.index('=')
line = line[ix+1:].strip()
return line
return ''
def get_val(self, expr):
data = self.browser_cmd('dump %s' % expr)
return pickle.loads(data)
def handle(self):
self.prompt = None
self.promptstate = False
self.isclosed = mutnodeset()
self.dataq = queue.Queue()
self.server.monitor.add_connection(self)
while 1:
try:
data = self.rfile.readline().decode('utf-8')
if not data:
raise EOFError('End of file')
if data.endswith(DONE):
raise EOFError('DONE')
except (EOFError, socket.error):
break
if data.endswith(READLINE):
prompt = data[:-len(READLINE)]
self.dataq.put(('PROMPT', prompt))
if self.prompt is None:
self.firstdata = self.exec_cmd(cmd=None, retdata=1)
else:
self.dataq.put(('DATA', data))
self.close()
class MonitorConnection(cmd.Cmd):
use_raw_input = 1
def __init__(self, monitor):
self.aliases = {}
cmd.Cmd.__init__(self)
self.hno = 0
self.isclosed = 0
self.forceexit = 0
self.prompt = '<Monitor> '
self.monitor = monitor
self.server = s = Server((LOCALHOST, HEAPYPORT), Handler)
self.server.monitor = monitor
self.st = threading.Thread(target=self.run_server,
args=())
self.st.start()
def close(self):
self.isclosed = 1
self.server.socket.shutdown(2)
self.server.server_close()
self.server.verify_request = lambda x, y: 0
def default(self, line):
cmd.Cmd.default(self, line)
cmd.Cmd.do_help(self, '')
def run_server(self):
s = self.server
while not self.isclosed:
s.handle_request()
s.server_close()
def exec_cmd(self, cmd):
if not cmd:
# I don't want the repeat of previous command when giving
# empty command that is provided by cmd.py.
# It turned out to be confusing sometimes.
return
line = cmd
try:
line = self.precmd(line)
stop = self.onecmd(line)
stop = self.postcmd(stop, line)
return stop
except BaseException:
self.handle_error(line)
def handle_error(self, cmdline):
"""Handle an error gracefully. May be overridden.
The default is to print a traceback and continue.
"""
print('-'*40, file=sys.stderr)
print('Exception happened during processing the command',
end=' ', file=sys.stderr)
print(repr(cmdline), file=sys.stderr)
import traceback
traceback.print_exc()
print('-'*40, file=sys.stderr)
# Alias handling etc copied from pdb.py in Python dist
def precmd(self, line):
"""Handle alias expansion and ';;' separator."""
self.curline = line
if not line:
return line
args = line.split()
while args[0] in self.aliases:
line = self.aliases[args[0]]
if '%' in line:
ii = 1
for tmpArg in args[1:]:
line = line.replace("%" + str(ii),
tmpArg)
line = line.replace('%>=' + str(ii),
' '.join(args[ii:]))
ii = ii + 1
line = line.replace("%*", ' '.join(args[1:]))
else:
line = line + ' ' + ' '.join(args[1:])
args = line.split()
# split into ';;' separated commands
# unless it's an alias command
if args[0] != 'alias':
marker = line.find(';;')
if marker >= 0:
# queue up everything after marker
next = line[marker+2:].lstrip()
self.cmdqueue.append(next)
line = line[:marker].rstrip()
return line
def do_exit(self, arg):
self.forceexit = 1
return 1
def help_exit(self):
print("""exit
-----
Exit from the monitor and from the Python process that started it.
This makes sure to exit without waiting for the server thread to terminate.
See also the q command.""")
do_h = cmd.Cmd.do_help
def help_h(self):
print("""h(elp)
-----
Without argument, print the list of available commands.
With a command name as argument, print help about that command.""")
def help_help(self):
self.help_h()
def do_int(self, arg):
try:
con = Console(stdin=self.stdin, stdout=self.stdout,
locals=self.__dict__)
con.interact(
"Local interactive console. To return to Monitor, type %r." %
con.EOF_key_sequence)
finally:
pass
def help_int(self):
print("""int
-----
Local interactive console.
This will bring up a Python console locally in
the same interpreter process that the Monitor itself.""")
def do_ki(self, arg):
if not arg:
arg = self.conid
arg = int(arg)
c = self.monitor.connections[arg]
if c.get_ps('noninterruptible'):
print('''\
Error: Can not interrupt this remote connection (uses Python < 2.4)''')
else:
print('Sending KeyboardInterrupt to connection %s.' % arg)
c.send_cmd(KEYBOARDINTERRUPT)
def help_ki(self):
print("""ki <connection ID>
-----
Keyboard Interrupt
Send a command to interrupt the remote thread on the specified
connection (default is the last one connected to).
Notes:
It currently only works with Python >= 2.4. The remote thread will
not always be awakened, for example if it is waiting in
time.sleep(). Sometimes using several ki commands helps.""")
def do_lc(self, arg):
table = [['CID', 'PID', 'ARGV']]
for cid, con in list(self.monitor.connections.items()):
table.append([cid,
con.get_ps('target.pid'),
con.get_ps('target.sys.argv')])
ptable(table, self.stdout)
def help_lc(self):
print("""lc
-----
List Connections.
List the currently open connections.
The table printed has one line per connection in this form:
CID PID ARGV
1 17999 ['/home/nilsson/bin/solitaire.py']
CID is the connection ID, which may be used as argument to the sc
command.
PID is the process ID of the target interpreter process. In Linux,
this is the parent of the remote control interpreter thread that runs
the Annex that the connection is talking to.
ARGV is the argument vector in the target Python interpereter.""")
def do_sc(self, arg):
if arg:
self.conid = int(arg)
print('Remote connection %d. To return to Monitor, type <Ctrl-C> or .<RETURN>' % self.conid)
self.monitor.set_connection(self.monitor.connections[self.conid])
def help_sc(self):
print("""sc <connection ID>
-----
Set connection to communicate with a remote thread.
With an argument, set current connection to the number specified.
Without argument, use the same connection as last time. You will then
be talking to a remote process via that connection. You can return to
Monitor at any time by <Ctrl-C>. You may also use the '.' command
(followed by <Return>), if the remote process is waiting for input.
The '.' character may be followed by a monitor command, to execute it
directly instead of returning to the monitor. For example, when
talking to a connection, '.sc 1' will directly change to connection 1.""")
def do_q(self, arg):
return 1
def help_q(self):
print("""q
-----
Quit from the monitor.
This will not exit from Python itself if called from an interactive
interpreter. To make sure to exit from Python, use the exit command.""")
class Monitor:
use_raw_input = 1
def __init__(self):
self.connection = self.monitor_connection = MonitorConnection(self)
self.connections = {}
self.ids = 0
self.prompt = None
def newid(self):
if not self.connections:
self.ids = 1
self.monitor_connection.conid = self.ids
else:
self.ids = max([1]+[c for c in list(self.connections.keys())])+1
return self.ids
def add_connection(self, connection):
hid = self.newid()
self.connections[hid] = connection
connection.monitor_id = hid
self.print_async('*** Connection %s opened ***' % hid)
def print_async(self, text):
""" Print text only if we are waiting for input,
and then restore the prompt. """
if self.prompt is not None:
print('\n'+text)
sys.stdout.write(self.prompt)
sys.stdout.flush()
def remove_connection(self, connection):
del self.connections[connection.monitor_id]
if connection is self.connection:
self.set_connection(self.monitor_connection)
self.print_async('*** Connection %s closed ***' %
connection.monitor_id)
def run(self):
try:
stop = 0
while not stop:
try:
while not stop:
conn = self.connection
self.prompt = conn.prompt
if conn is not self.monitor_connection:
conn.exec_cmd(cmd=None, noblock=1)
cmd = input(conn.prompt)
self.prompt = None
conn = None
if cmd.startswith('.'):
if cmd == '.':
self.connection = self.monitor_connection
else:
cmd = cmd[1:]
conn = self.monitor_connection
# elif cmd or self.connection is self.monitor_connection:
else:
conn = self.connection
if conn:
try:
r = conn.exec_cmd(cmd)
except EOFError:
r = 1
if conn is self.monitor_connection and r:
stop = 1
except EOFError:
'We better exit in case the input is from a file'
print('*** End Of File - Exiting Monitor ***')
self.connection = self.monitor_connection
stop = 1
except KeyboardInterrupt:
print('KeyboardInterrupt')
print('Use the ki command to interrupt a remote process.')
self.connection = self.monitor_connection
continue
finally:
self.prompt = None # Avoid closing messages
self.close()
def close(self):
for c in list(self.connections.values()):
try:
c.close()
except socket.error:
pass
try:
self.monitor_connection.close()
except socket.error:
pass
if self.monitor_connection.forceexit:
os._exit(0)
def set_connection(self, connection):
self.connection = connection
self.prompt = connection.prompt
def monitor():
"""monitor() [0]
Start an interactive remote monitor.
This can be used to get information about the state, in
particular the memory usage, of separately running Python
processes.
References
[0] heapy_Use.html#heapykinds.Use.monitor"""
from guppy.heapy import Remote
Remote.off()
m = Monitor()
m.run()
if __name__ == '__main__':
monitor()