????
Current Path : /proc/thread-self/root/opt/cpanel/libcurl/share/doc/ea-libcurl/ |
Current File : //proc/thread-self/root/opt/cpanel/libcurl/share/doc/ea-libcurl/CHANGES |
_ _ ____ _ ___| | | | _ \| | / __| | | | |_) | | | (__| |_| | _ <| |___ \___|\___/|_| \_\_____| Changelog Version 8.2.1 (26 Jul 2023) Daniel Stenberg (26 Jul 2023) - RELEASE-NOTES: synced curl 8.2.1 release - THANKS: add contributors from 8.2.1 - docs: provide more see also for cipher options More cross references. Hide nroff errors. Closes #11513 - docs: mark two TLS options for TLS, not SSL Closes #11514 Brad Harder (25 Jul 2023) - curl_multi_wait.3: fix arg quoting to doc macro .BR Closes #11511 Daniel Stenberg (24 Jul 2023) - RELEASE-NOTES: synced Viktor Szakats (24 Jul 2023) - cmake: update ngtcp2 detection Replace `OpenSSL` with `quictls` to follow the same change in the v0.17.0 ngtcp2 release. Follow-up to e0093b4b732f6495b0fb1cd6747cbfedcdcf63ed Closes #11508 Stefan Eissing (24 Jul 2023) - http: VLH, very large header test and fixes - adding tests using very large passwords in auth - fixes general http sending to treat h3 like h2, and not like http1.1 - eliminate H2_HEADER max definitions and use the commmon DYN_HTTP_REQUEST everywhere, different limits do not help - fix http2 handling of requests denied by nghttp2 on send to immediately report the refused stream Closes #11509 Andrei Rybak (23 Jul 2023) - CONTRIBUTE: drop mention of copyright year ranges Year ranges in copyrights were dropped in commits [1] and [2]. Verification of year ranges in copyrights was dropped from script 'scripts/copyright.pl' in commit [3]. However, the corresponding passages in file 'docs/CONTRIBUTE.md' weren't updated. Drop mentions of copyright year ranges from 'docs/CONTRIBUTE.md'. [1] 2bc1d775f (copyright: update all copyright lines and remove year ranges, 2023-01-02) [2] c46761bd8 (tests/http: remove year ranges from copyrights, 2023-03-14) [3] 0e293bacb (copyright.pl: cease doing year verifications, 2023-01-28) Closes #11504 - CONTRIBUTE: fix syntax in commit message description File 'docs/CONTRIBUTE.md' includes a description of how one should write commit messages in the curl project. Different possible parts of the message are enclosed in square brackets. One exception is the section describing how the curl project doesn't use "Signed-off-by" commit trailers [1], which is enclosed in an opening curly brace paired with a closing square bracket. Fix the enclosing square brackets in description of "Signed-off-by" trailers in commit messages in file 'docs/CONTRIBUTE.md'. [1] See description of option '--signoff' in Git documentation: https://git-scm.com/docs/git-commit Closes #11504 Daniel Stenberg (23 Jul 2023) - src/mkhelp: strip off escape sequences At some point the nroff command stopped stripping off escape sequences, so then this script needs to do the job instead. Reported-by: VictorVG on github Fixes #11501 Closes #11503 - KNOWN_BUGS: building for old macOS fails with gcc Closes #11441 Jacob Hoffman-Andrews (22 Jul 2023) - rustls: update rustls-ffi 0.10.0 This brings in version 0.21.0 of the upstream rustls implementation, which notable includes support for IP address certificates. Closes #10865 Brad Harder (22 Jul 2023) - websocket: rename arguments/variables to match docs Pedantry/semantic-alignment between functions, docs, comments with respect to websocket protocol code; No functional change intended. * "totalsize", "framesize" becomes "fragsize" (we deal in frame fragments). * "sendflags" becomes "flags" * use canonical CURL *handle Closes #11493 Jan Macku (21 Jul 2023) - bug_report: use issue forms instead of markdown template Issue forms allow you to define web-like input forms using YAML syntax. It allows you to guide the reporter to get the required information. Signed-off-by: Jan Macku <jamacku@redhat.com> Closes #11474 Daniel Stenberg (21 Jul 2023) - TODO: Obey Retry-After in redirects (remove "Set custom client ip when using haproxy protocol" which was shipped in 8.2.0) Mentioned-by: Yair Lenga Closes #11447 - RELEASE-NOTES: synced Oliver Roberts (21 Jul 2023) - amissl: fix AmiSSL v5 detection Due to changes in the AmiSSL SDK, the detection needed adjusting. Closes #11477 Alois Klink (21 Jul 2023) - unittest/makefile: remove unneeded unit1621_LDADD The `unit1621_LDADD` variable has the exact same value as the `LDADD` flag in `Makefile.am`, except without `@LDFLAGS@ @LIBCURL_LIBS@`. This was originally added by [98e6629][], but I can't see any reason why it exists, so we should remove it to clean things up. [98e6629]: https://github.com/curl/curl/commit/98e6629154044e4ab1ee7cff8351c7 ebcb131e88 Closes #11494 - unittest/makefile: remove unneeded unit1394_LDADD These custom `unit1394_LDADD` and similar automake overrides are no longer neded. They were originally added by added by [8dac7be][] for metalink support, but are no longer after [265b14d][] removed metalink. [8dac7be]: https://github.com/curl/curl/commit/8dac7be438512a8725d3c71e9139bd fdcac1ed8c [265b14d]: https://github.com/curl/curl/commit/265b14d6b37c4298bd5556fabcbc37 d36f911693 Closes #11494 - cmake: add `libcurlu`/`libcurltool` for unit tests Add a `libcurlu`/`libcurltool` static library that is compiled only for unit tests. We use `EXCLUDE_FROM_ALL` to make sure that they're not built by default, they're only built if unit tests are built. These libraries allow us to compile every unit test with CMake. Closes #11446 Daniel Stenberg (21 Jul 2023) - test979: test -u with redirect to (the same) absolute host Verifies #11492 - transfer: do not clear the credentials on redirect to absolute URL Makes test 979 work. Regression shipped in 8.2.0 from commit dd4d1a26959f63a2c Fixes #11486 Reported-by: Cloudogu Siebels Closes #11492 Jon Rumsey (20 Jul 2023) - os400: correct EXPECTED_STRING_LASTZEROTERMINATED Correct EXPECTED_STRING_LASTZEROTERMINATED to account for CURLOPT_HAPROXY_CLIENT_IP which requires EBCDIC to ASCII conversion when passed into curl_easy_setopt(). Closes #11476 Oliver Roberts (20 Jul 2023) - amissl: add missing signal.h include In some environments, signal.h is already included, but not in others which cause compilation to fail, so explictly include it. Closes #11478 - amigaos: fix sys/mbuf.h m_len macro clash The updated Curl_http_req_make and Curl_http_req_make2 functions spawned a parameter called m_len. The AmigaOS networking headers, derived from NetBSD, contain "#define m_len m_hdr.mh_len" which clashes with this. Since we do not actually use mbuf, force the include file to be ignored, removing the clash. Closes #11479 Daniel Stenberg (20 Jul 2023) - socks: print ipv6 address within brackets Fixes #11483 Closes #11484 Christian Schmitz (20 Jul 2023) - libcurl-errors.3: add CURLUE_OK Closes #11488 Oliver Roberts (20 Jul 2023) - cfilters: rename close/connect functions to avoid clashes Rename `close` and `connect` in `struct Curl_cftype` for consistency and to avoid clashes with macros of the same name (the standard AmigaOS networking connect() function is implemented via a macro). Closes #11491 Stefan Eissing (20 Jul 2023) - http2: fix regression on upload EOF handling - a regression introduced by c9ec85121110d7cbbbed2990024222c8f5b8afe5 where optimization of small POST bodies leads to a new code path for such uploads that did not trigger the "done sending" event - add triggering this event for early "upload_done" situations Fixes #11485 Closes #11487 Reported-by: Aleksander Mazur Daniel Stenberg (19 Jul 2023) - configure: check for nghttp2_session_get_stream_local_window_size The http2 code uses it now. Introduced in nghttp2 1.15.0 (Sep 2016) Fixes #11470 Reported-by: Paul Howarth Closes #11473 Stefan Eissing (19 Jul 2023) - quiche: fix segfault and other things - refs #11449 where a segfault is reported when IP Eyeballing did not immediately connect but made several attempts - The transfer initiating the eyeballing was initialized too early, leadding to references to the filter instance that was then replaced in the subsequent eyeball attempts. That led to a use after free in the buffer handling for the transfer - transfers are initiated now more lazy (like in the ngtcp2 filter), when the stream is actually opened - suppress reporting on quiche event errors for "other" transfers than the current one to not fail a transfer due to faults in another one. - revert recent return value handling for quiche_h3_recv_body() to not indicate an error but an EAGAIN situation. We wish quiche would document what functions return. Fixes #11449 Closes #11469 Reported-by: ウさん Daniel Stenberg (19 Jul 2023) - hostip: return IPv6 first for localhost resolves Fixes #11465 Reported-by: Chilledheart on github Closes #11466 Harry Sintonen (19 Jul 2023) - tool: fix tool_seek_cb build when SIZEOF_CURL_OFF_T > SIZEOF_OFF_T - a variable was renamed, and some use of it wasn't. this fixes the build. Closes #11468 Stefan Eissing (19 Jul 2023) - quiche: fix lookup of transfer at multi - refs #11449 where weirdness in quiche multi connection tranfers was observed - fixes lookup of transfer for a quiche event to take the connection into account - formerly, a transfer with the same stream_id, but on another connection could be found Closes #11462 Daniel Stenberg (19 Jul 2023) - RELEASE-NOTES: synced bump to 8.2.1 John Haugabook (19 Jul 2023) - ciphers.d: put URL in first column This makes the URL turn into a link properly when "webified". Fixes https://github.com/curl/curl-www/issues/270 Closes #11464 Version 8.2.0 (19 Jul 2023) Daniel Stenberg (19 Jul 2023) - RELEASE-NOTES: synced 8.2.0 release - THANKS-filter: strip out "GitHub" - THANKS: add contributors from 8.2.0 - RELEASE-PROCEDURE.md: adjust the release dates Stefan Eissing (17 Jul 2023) - quiche: fix defects found in latest coverity report Closes #11455 Daniel Stenberg (17 Jul 2023) - quiche: avoid NULL deref in debug logging Coverity reported "Dereference after null check" If stream is NULL and the function exits, the logging must not deref it. Closes #11454 Stefan Eissing (17 Jul 2023) - http2: treat initial SETTINGS as a WINDOW_UPDATE - refs #11426 where spurious stalls on large POST requests are reported - the issue seems to involve the following * first stream on connection adds up to 64KB of POST data, which is the max default HTTP/2 stream window size transfer is set to HOLD * initial SETTINGS from server arrive, enlarging the stream window. But no WINDOW_UPDATE is received. * curl stalls - the fix un-HOLDs a stream on receiving SETTINGS, not relying on a WINDOW_UPDATE from lazy servers Closes #11450 Daniel Stenberg (17 Jul 2023) - ngtcp2: assigning timeout, but value is overwritten before used Reported by Coverity Closes #11453 - krb5: add typecast to please Coverity Derzsi Dániel (16 Jul 2023) - wolfssl: support setting CA certificates as blob Closes #11445 - wolfssl: detect when TLS 1.2 support is not built into wolfssl Closes #11444 Graham Campbell (15 Jul 2023) - CI: bump nghttp2 from 1.55.0 to 1.55.1 Closes #11442 Daniel Stenberg (15 Jul 2023) - curl: return error when asked to use an unsupported HTTP version When one of the following options are used but the libcurl in use does not support it: --http2 --http2-prior-knowledge --proxy-http2 Closes #11440 Chris Paulson-Ellis (14 Jul 2023) - cf-socket: don't bypass fclosesocket callback if cancelled before connect After upgrading to 8.1.2 from 7.84.0, I found that sockets were being closed without calling the fclosesocket callback if a request was cancelled after the associated socket was created, but before the socket was connected. This lead to an imbalance of fopensocket & fclosesocket callbacks, causing problems with a custom event loop integration using the multi-API. This was caused by cf_socket_close() calling sclose() directly instead of calling socket_close() if the socket was not active. For regular TCP client connections, the socket is activated by cf_socket_active(), which is only called when the socket completes the connect. As far as I can tell, this issue has existed since 7.88.0. That is, since the code in question was introduced by: commit 71b7e0161032927cdfb4e75ea40f65b8898b3956 Author: Stefan Eissing <stefan@eissing.org> Date: Fri Dec 30 09:14:55 2022 +0100 lib: connect/h2/h3 refactor Closes #11439 Daniel Stenberg (13 Jul 2023) - tool_parsecfg: accept line lengths up to 10M Bumped from 100K set in 47dd957daff9 Reported-by: Antoine du Hamel Fixes #11431 Closes #11435 Stefan Eissing (13 Jul 2023) - CI: brew fix for openssl in default path If brew install/update links openssl into /usr/local, it will be found before anything we add with `-isystem path` to CPP/LDLFAGS. Get rid of that by unlinking the keg. Fixes #11413 Closes #11436 Daniel Stenberg (13 Jul 2023) - RELEASE-NOTES: synced Ondřej Koláček (13 Jul 2023) - sectransp: fix EOF handling Regression since the large refactor from 2022 Closes #11427 Daniel Stenberg (13 Jul 2023) - checksrc: quote the file name to work with "funny" letters Closes #11437 Karthikdasari0423 (13 Jul 2023) - HTTP3.md: ngtcp2 updated to v0.17.0 and nghttp3 to v0.13.0 Follow-up to e0093b4b732f6 Closes #11433 Daniel Stenberg (13 Jul 2023) - CURLOPT_MIMEPOST.3: clarify what setting to NULL means Follow-up to e08382a208d4e480 Closes #11430 Tatsuhiro Tsujikawa (12 Jul 2023) - ngtcp2: build with 0.17.0 and nghttp3 0.13.0 - ngtcp2_crypto_openssl was renamed to ngtcp2_crypto_quictls. Closes #11428 - CI: Bump ngtcp2, nghttp3, and nghttp2 Closes #11428 James Fuller (11 Jul 2023) - example/maxconnects: set maxconnect example Closes #11343 Pontakorn Prasertsuk (11 Jul 2023) - http2: send HEADER & DATA together if possible Closes #11420 Daniel Stenberg (11 Jul 2023) - CI: use wolfSSL 5.6.3 in builds No using master anymore Closes #11424 SaltyMilk (11 Jul 2023) - fopen: optimize Closes #11419 Daniel Stenberg (11 Jul 2023) - cmake: make use of snprintf Follow-up to 935b1bd4544a23a91d68 Closes #11423 Stefan Eissing (11 Jul 2023) - macOS: fix taget detection - TARGET_OS_OSX is not always defined on macOS - this leads to missing symbol Curl_macos_init() - TargetConditionals.h seems to define these only when dynamic targets are enabled (somewhere?) - this PR fixes that on my macOS 13.4.1 - I have no clue why CI builds worked without it Follow-up to c7308592fb8ba213fc2c1 Closes #11417 Stan Hu (9 Jul 2023) - hostip.c: Move macOS-specific calls into global init call https://github.com/curl/curl/pull/7121 introduced a macOS system call to `SCDynamicStoreCopyProxies`, which is invoked every time an IP address needs to be resolved. However, this system call is not thread-safe, and macOS will kill the process if the system call is run first in a fork. To make it possible for the parent process to call this once and prevent the crash, only invoke this system call in the global initialization routine. In addition, this change is beneficial because it: 1. Avoids extra macOS system calls for every IP lookup. 2. Consolidates macOS-specific initialization in a separate file. Fixes #11252 Closes #11254 Daniel Stenberg (9 Jul 2023) - docs: use a space after RFC when spelling out RFC numbers Closes #11382 Margu (9 Jul 2023) - imap-append.c: update to make it more likely to work Fixes #10300 Closes #11397 Emanuele Torre (9 Jul 2023) - tool_writeout_json: fix encoding of control characters Control characters without a special escape sequence e.g. %00 or %06 were being encoded as "u0006" instead of "\u0006". Ref: https://github.com/curl/trurl/pull/214#discussion_r1257487858 Closes #11414 Stefan Eissing (9 Jul 2023) - http3/ngtcp2: upload EAGAIN handling - refs #11389 where IDLE timeouts on upload are reported - reword ngtcp2 expiry handling to apply to both send+recv calls into the filter - EAGAIN uploads similar to the recent changes in HTTP/2, e.g. report success only when send data was ACKed. - HOLD sending of EAGAINed uploads to avoid cpu busy loops - rename internal function for consistency with HTTP/2 implementation Fixes #11389 Closes #11390 Brian Nixon (9 Jul 2023) - tool_easysrc.h: correct `easysrc_perform` for `CURL_DISABLE_LIBCURL_OPTION` Closes #11398 Daniel Stenberg (9 Jul 2023) - RELEASE-NOTES: synced - transfer: clear credentials when redirecting to absolute URL Make sure the user and password for the second request is taken from the redirected-to URL. Add test case 899 to verify. Reported-by: James Lucas Fixes #11410 Closes #11412 Stefan Eissing (8 Jul 2023) - hyper: fix EOF handling on input We ran out of disc space due to an infinite loop with debug logging Fixes #11377 Closes #11385 Reported-by: Dan Fandrich - http2: raise header limitations above and beyond - not quite to infinity - rewrote the implementation of our internal HTTP/1.x request parsing to work with very large lines using dynbufs. - new default limit is `DYN_HTTP_REQUEST`, aka 1MB, which is also the limit of curl's general HTTP request processing. Fixes #11405 Closes #11407 Juan Cruz Viotti (8 Jul 2023) - curl_easy_nextheader.3: add missing open parenthesis examples Closes #11409 Signed-off-by: Juan Cruz Viotti <jv@jviotti.com> Dan Fandrich (7 Jul 2023) - CI: enable verbose test output on pytest This shows individual pass/fail status on tests and makes this output consistent with other jobs' pytest invocations. Stefan Eissing (28 Jun 2023) - http2: fix crash in handling stream weights - Delay the priority handling until the stream has been opened. - Add test2404 to reproduce and verify. Weights may change "on the run", which is why there are checks in general egress handling. These must not trigger when the stream has not been opened yet. Reported-by: jbgoog@users.noreply.github.com Fixes https://github.com/curl/curl/issues/11379 Closes https://github.com/curl/curl/pull/11384 - tests/http: Add mod_h2 directive `H2ProxyRequests` master of mod_h2 now requires H2ProxyRequests directives for forward proxying with HTTP/2 to work. Ref: https://github.com/icing/mod_h2/commit/3897a7086 Closes https://github.com/curl/curl/pull/11392 Dan Fandrich (28 Jun 2023) - CI: make Appveyor job names unique Two otherwise identical mingw-w64 jobs now have their differing compiler versions mentioned in their names. Sheshadri.V (25 Jun 2023) - curl.h: include <sys/select.h> for vxworks Closes #11356 Dan Fandrich (24 Jun 2023) - CI: enable parallel make in more builds Most CI services provide at least two cores, so enable parallel make jobs to take advantage of that for builds. Some dependencies aren't safe to build in parallel so leave those as-is. Also, rename a few workflows to eliminate duplicate names and provide a better idea what they're about. - CI: don't install impacket if tests are not run It just wastes time and bandwidth and isn't even used. divinity76 (24 Jun 2023) - configure: the --without forms of the options are also gone --without-darwin-ssl and --without-metalink Closes #11378 Daniel Stenberg (23 Jun 2023) - configure: add check for ldap_init_fd ... as otherwise the configure script will say it is OpenLDAP in the summary, but not set the USE_OPENLDAP define, therefor not using the intended OpenLDAP code paths. Regression since 4d7385446 (7.85.0) Fixes #11372 Closes #11374 Reported-by: vlkl-sap on github Michał Petryka (23 Jun 2023) - cmake: stop CMake from quietly ignoring missing Brotli The CMake project was set to `QUIET` for Brotli instead of `REQUIRED`. This makes builds unexpectedly ignore missing Brotli even when `CURL_BROTLI` is enabled. Closes #11376 Emanuele Torre (22 Jun 2023) - docs: add more .IP after .RE to fix indentation of generate paragraphs follow-up from 099f41e097c030077b8ec078f2c2d4038d31353b I just thought of checking all the other files with .RE, and I found 6 other files that were missing .IP at the end. Closes #11375 Stefan Eissing (22 Jun 2023) - http2: h2 and h2-PROXY connection alive check fixes - fix HTTP/2 check to not declare a connection dead when the read attempt results in EAGAIN - add H2-PROXY alive check as for HTTP/2 that was missing and is needed - add attach/detach around Curl_conn_is_alive() and remove these in filter methods - add checks for number of connections used in some test_10 proxy tunneling tests Closes #11368 - http2: error stream resets with code CURLE_HTTP2_STREAM - refs #11357, where it was reported that HTTP/1.1 downgrades no longer works - fixed with suggested change - added test_05_03 and a new handler in the curltest module to reproduce that downgrades work Fixes #11357 Closes #11362 Reported-by: Jay Satiro Daniel Stenberg (22 Jun 2023) - connect-timeout.d: mention that the DNS lookup is included Closes #11370 Emanuele Torre (22 Jun 2023) - quote.d: fix indentation of generated paragraphs quote.d was missing a .IP at the end which caused the paragraphs generated for See-also, Multi, and Example to not be indented correctly. I also remove a redundant "This option can be used multiple times.", and replaced .IP "item" with .TP .B "item" to make more clear which lines are part of the list of commands and which aren't. Closes #11371 Paul Wise (22 Jun 2023) - checksrc: modernise perl file open Use regular variables and separate file open modes from filenames. Suggested by perlcritic Copied from https://github.com/curl/trurl/commit/f2784a9240f47ee28a845 Closes #11358 Dan Fandrich (21 Jun 2023) - runtests: work around a perl without SIGUSR1 At least msys2 perl v5.32.1 doesn't seem to define this signal. Since this signal is only used for debugging, just ignore if setting it fails. Reported-by: Marcel Raad Fixes #11350 Closes #11366 - runtests: include missing valgrind package use valgrind was missing which caused torture tests with valgrind enabled to fail. Reported-by: Daniel Stenberg Fixes #11364 Closes #11365 - runtests: use more consistent failure lines After a test failure log a consistent log message to make it easier to parse the log file. Also, log a consistent message with "ignored" for failures that cause the test to be not considered at all. These should perhaps be counted in the skipped category, but this commit does not change that behaviour. - runtests: consistently write the test check summary block The memory check character was erroneously omitted if the memory checking file was not available for some reason, making the block of characters an inconsistent length. - test2600: fix the description It looks like it was cut-and-pasted. Closes #11354 Daniel Stenberg (21 Jun 2023) - TODO: "Support HTTP/2 for HTTP(S) proxies" *done* humbleacolyte (21 Jun 2023) - cf-socket: move ctx declaration under HAVE_GETPEERNAME Closes #11352 Daniel Stenberg (20 Jun 2023) - RELEASE-NOTES: synced - example/connect-to: show CURLOPT_CONNECT_TO Closes #11340 Stefan Eissing (20 Jun 2023) - hyper: unslow - refs #11203 where hyper was reported as being slow - fixes hyper_executor_poll to loop until it is out of tasks as advised by @seanmonstar in https://github.com/hyperium/hyper/issue s/3237 - added a fix in hyper io handling for detecting EAGAIN - added some debug logs to see IO results - pytest http/1.1 test cases pass - pytest h2 test cases fail on connection reuse. HTTP/2 connection reuse does not seem to work. Hyper submits a request on a reused connection, curl's IO works and thereafter hyper declares `Hyper: [1] operation was canceled: connection cl osed` on stderr without any error being logged before. Fixes #11203 Reported-by: Gisle Vanem Advised-by: Sean McArthur Closes #11344 - HTTP/2: upload handling fixes - fixes #11242 where 100% CPU on uploads was reported - fixes possible stalls on last part of a request body when that information could not be fully send on the connection due to an EAGAIN - applies the same EGAIN handling to HTTP/2 proxying Reported-by: Sergey Alirzaev Fixed #11242 Closes #11342 Daniel Stenberg (20 Jun 2023) - example/opensslthreadlock: remove This shows how to setup OpenSSL mutex callbacks, but this is not necessary since OpenSSL 1.1.0 - meaning that no currently supported OpenSSL version requires this anymore Closes #11341 Dan Fandrich (19 Jun 2023) - libtest: display the times after a test timeout error This is to help with test failure debugging. Ref: #11328 Closes #11329 - test2600: bump a test timeout Case 1 failed at least once on GHA by going 30 msec too long. Ref: #11328 - runtests: better detect and handle pipe errors in the controller Errors reading and writing to the pipes are now better detected and propagated up to the main test loop so it can be cleanly shut down. Such errors are usually due to a runner dying so it doesn't make much sense to try to continue the test run. - runtests: cleanly abort the runner if the controller dies If the controller dies unexpectedly, have the runner stop its servers and exit cleanly. Otherwise, the orphaned servers will stay running in the background. - runtests: improve error logging Give more information about test harness error conditions to help figure out what might be wrong. Print some internal test state when SIGUSR1 is sent to runtests.pl. Ref: #11328 - runtests: better handle ^C during slow tests Since the SIGINT handler now just sets a flag that must be checked in the main controller loop, make sure that runs periodically. Rather than blocking on a response from a test runner near the end of the test run, add a short timeout to allow it. - runtests: rename server command file The name ftpserver.cmd was historical and has been used for more than ftp for many years now. Rename it to plain server.cmd to reduce confusion. - tests: improve reliability of TFTP tests Stop checking the timeout used by the client under test (for most tests). The timeout will change if the TFTP test server is slow (such as happens on an overprovisioned CI server) because the client will retry and reduce its timeout, and the actual value is not important for most tests. test285 is changed a different way, by increasing the connect timeout. This improves test coverage by allowing the changed timeout value to be checked, but improves reliability with a carefully-chosen timeout that not only allows twice the time to respond as before, but also allows several retries before the client will change its timeout value. Ref: #11328 Daniel Stenberg (19 Jun 2023) - cf-socket: skip getpeername()/getsockname for TFTP Since the socket is not connected then the call fails. When the call fails, failf() is called to write an error message that is then surviving and is returned when the *real* error occurs later. The earlier, incorrect, error therefore hides the actual error message. This could be seen in stderr for test 1007 Test 1007 has now been extended to verify the stderr message. Closes #11332 - example/crawler: make it use a few more options For show, but reasonable - libcurl-ws.3: mention raw mode Closes #11339 - example/default-scheme: set the default scheme for schemeless URLs Closes #11338 - example/hsts-preload: show one way to HSTS preload Closes #11337 - examples/http-options: show how to send "OPTIONS *" With CURLOPT_REQUEST_TARGET. Also add use of CURLOPT_QUICK_EXIT to show. Closes #11333 - examples: make use of CURLOPT_(REDIR_|)PROTOCOLS_STR To show how to use them Closes #11334 - examples/smtp-mime: use CURLOPT_MAIL_RCPT_ALLOWFAILS For show Closes #11335 - http: rectify the outgoing Cookie: header field size check Previously it would count the size of the entire outgoing request and not just the size of only the Cookie: header field - which was the intention. This could make the check be off by several hundred bytes in some cases. Closes #11331 Jay Satiro (17 Jun 2023) - lib: fix some format specifiers - Use CURL_FORMAT_CURL_OFF_T where %zd was erroneously used for some curl_off_t variables. - Use %zu where %zd was erroneously used for some size_t variables. Prior to this change some of the Windows CI tests were failing because in Windows 32-bit targets have a 32-bit size_t and a 64-bit curl_off_t. When %zd was used for some curl_off_t variables then only the lower 32-bits was read and the upper 32-bits would be read for part or all of the next specifier. Fixes https://github.com/curl/curl/issues/11327 Closes https://github.com/curl/curl/pull/11321 Marcel Raad (16 Jun 2023) - test427: add `cookies` feature and keyword This test doesn't work with `--disable-cookies`. Closes https://github.com/curl/curl/pull/11320 Chris Talbot (15 Jun 2023) - imap: Provide method to disable SASL if it is advertised - Implement AUTH=+LOGIN for CURLOPT_LOGIN_OPTIONS to prefer plaintext LOGIN over SASL auth. Prior to this change there was no method to be able to fall back to LOGIN if an IMAP server advertises SASL capabilities. However, this may be desirable for e.g. a misconfigured server. Per: https://www.ietf.org/rfc/rfc5092.html#section-3.2 ";AUTH=<enc-auth-type>" looks to be the correct way to specify what authenication method to use, regardless of SASL or not. Closes https://github.com/curl/curl/pull/10041 Daniel Stenberg (15 Jun 2023) - RELEASE-NOTES: synced - examples/multi-debugcallback.c: avoid the bool typedef Apparently this cannot be done in c23 Reported-by: Cristian Rodríguez Fixes #11299 Closes #11319 - docs/libcurl/libcurl.3: cleanups and improvements Closes #11317 - libcurl-ws.3: fix typo - curl_ws_*.3: enhance - all: SEE ALSO the libcurl-ws man page - send: add example and return value information - meta: mention that the returned data is read-only Closes #11318 - docs/libcurl/libcurl-ws.3: see also CURLOPT_WS_OPTIONS - docs/libcurl/libcurl-ws.3: minor polish - libcurl-ws.3. WebSocket API overview Closes #11314 - libcurl-url.3: also mention CURLUPART_ZONEID ... and sort the two part-using lists alphabetically Marcel Raad (14 Jun 2023) - fopen: fix conversion warning on 32-bit Android When building for 32-bit ARM or x86 Android, `st_mode` is defined as `unsigned int` instead of `mode_t`, resulting in a -Wimplicit-int-conversion clang warning because `mode_t` is `unsigned short`. Add a cast to silence the warning. Ref: https://android.googlesource.com/platform/bionic/+/refs/tags/ndk-r25c/li bc/include/sys/stat.h#86 Closes https://github.com/curl/curl/pull/11313 - http2: fix variable type `max_recv_speed` is `curl_off_t`, so using `size_t` might result in -Wconversion GCC warnings for 32-bit `size_t`. Visible in the NetBSD ARM autobuilds. Closes https://github.com/curl/curl/pull/11312 Daniel Stenberg (13 Jun 2023) - vtls: fix potentially uninitialized local variable warnings Follow-up from a4a5e438ae533c Closes #11310 - timeval: use CLOCK_MONOTONIC_RAW if available Reported-by: Harry Sintonen Ref: #11288 Closes #11291 Stefan Eissing (12 Jun 2023) - tool: add curl command line option `--trace-ids` - added and documented --trace-ids to prepend (after the timestamp) the transfer and connection identifiers to each verbose log line - format is [n-m] with `n` being the transfer id and `m` being the connection id. In case there is not valid connection id, print 'x'. - Log calls with a handle that has no transfer id yet, are written without any ids. Closes #11185 - lib: add CURLINFO_CONN_ID and CURLINFO_XFER_ID - add an `id` long to Curl_easy, -1 on init - once added to a multi (or its own multi), it gets a non-negative number assigned by the connection cache - `id` is unique among all transfers using the same cache until reaching LONG_MAX where it will wrap around. So, not unique eternally. - CURLINFO_CONN_ID returns the connection id attached to data or, if none present, data->state.lastconnect_id - variables and type declared in tool for write out Closes #11185 Daniel Stenberg (12 Jun 2023) - CURLOPT_INFILESIZE.3: mention -1 triggers chunked Ref: #11300 Closes #11304 Philip Heiduck (12 Jun 2023) - CI: openssl-3.0.9+quic Closes #11296 Karthikdasari0423 (12 Jun 2023) - HTTP3.md: update openssl version Closes #11297 Daniel Stenberg (12 Jun 2023) - vtls: avoid memory leak if sha256 call fails ... in the pinned public key handling function. Reported-by: lizhuang0630 on github Fixes #11306 Closes #11307 - examples/ipv6: disable on win32 I can't make if_nametoindex() work there Follow-up to c23dc42f3997acf23 Closes #11305 - tool_operate: allow cookie lines up to 8200 bytes Since this option might set multiple cookies in the same line, it does not make total sense to cap this at 4096 bytes, which is the limit for a single cookie name or value. Closes #11303 - test427: verify sending more cookies than fit in a 8190 bytes line curl will then only populate the header with cookies that fit, dropping ones that otherwise would have been sent Ref: https://curl.se/mail/lib-2023-06/0020.html Closes #11303 - testutil: allow multiple %-operators on the same line Closes #11303 Oleg Jukovec (12 Jun 2023) - docs: update CURLOPT_UPLOAD.3 The behavior of CURLOPT_UPLOAD differs from what is described in the documentation. The option automatically adds the 'Transfer-Encoding: chunked' header if the upload size is unknown. Closes #11300 Daniel Stenberg (12 Jun 2023) - RELEASE-NOTES: synced - CURLOPT_AWS_SIGV4.3: remove unused variable from example Closes #11302 - examples/https.c: use CURLOPT_CA_CACHE_TIMEOUT for demonstration purposes Closes #11290 - example/ipv6: feature CURLOPT_ADDRESS_SCOPE in use Closes #11282 Karthikdasari0423 (10 Jun 2023) - docs: Update HTTP3.md for newer ngtcp2 and nghttp3 Follow-up to fb9b9b58 Ref: #11184 Closes #11295 Dan Fandrich (10 Jun 2023) - docs: update the supported ngtcp2 and nghttp3 versions Follow-up to cae9d10b Ref: #11184 Closes #11294 - tests: fix error messages & handling around sockets The wrong error code was checked on Windows on UNIX socket failures, which could have caused all UNIX sockets to be reported as having errored and the tests therefore skipped. Also, a useless error message was displayed on socket errors in many test servers on Windows because strerror() doesn't work on WinSock error codes; perror() is overridden there to work on all errors and is used instead. Ref #11258 Closes #11265 Daniel Stenberg (9 Jun 2023) - CURLOPT_SSH_PRIVATE_KEYFILE.3: expand on the file search Reported-by: atjg on github Ref: #11287 Closes #11289 Stefan Eissing (9 Jun 2023) - ngtcp2: use ever increasing timestamp in io - ngtcp2 v0.16.0 asserts that timestamps passed to its function will only ever increase. - Use a context shared between ingress/egress operations that uses a shared timestamp, regularly updated during calls. Closes #11288 Daniel Stenberg (9 Jun 2023) - GHA: use nghttp2 1.54.0 for the ngtcp2 jobs Philip Heiduck (9 Jun 2023) - GHA: ngtcp2: use 0.16.0 and nghttp3 0.12.0 Daniel Stenberg (9 Jun 2023) - ngtcp2: build with 0.16.0 and nghttp3 0.12.0 - moved to qlog_write - crypto => encryption - CRYPTO => ENCRYPTION - removed "_is_" - ngtcp2_conn_shutdown_stream_read and ngtcp2_conn_shutdown_stream_write got flag arguments - the nghttp3_callbacks struct got a recv_settings callback Closes #11184 - example/http2-download: set CURLOPT_BUFFERSIZE Primarily because no other example sets it, and remove the disabling of the certificate check because we should not recommend that. Closes #11284 - example/crawler: also set CURLOPT_AUTOREFERER Could make sense, and it was not used in any example before. Closes #11283 Wyatt OʼDay (9 Jun 2023) - tls13-ciphers.d: include Schannel Closes #11271 Daniel Stenberg (9 Jun 2023) - curl_pushheader_byname/bynum.3: document in their own man pages These two functions were added in 7.44.0 when CURLMOPT_PUSHFUNCTION was introduced but always lived a life in the shadows, embedded in the CURLMOPT_PUSHFUNCTION man page. Until now. It makes better sense and gives more visibility to document them in their own stand-alone man pages. Closes #11286 - curl_mprintf.3: minor fix of the example - curl_url_set: enforce the max string length check for all parts Update the docs and test 1559 accordingly Closes #11273 - examples/ftpuploadresume.c: add use of CURLOPT_ACCEPTTIMEOUT_MS For show Closes #11277 - examples/unixsocket.c: example using CURLOPT_UNIX_SOCKET_PATH and alternatively CURLOPT_ABSTRACT_UNIX_SOCKET Closes #11276 Anssi Kolehmainen (8 Jun 2023) - docs: fix missing parameter names in examples Closes #11278 Daniel Stenberg (8 Jun 2023) - urlapi: have *set(PATH) prepend a slash if one is missing Previously the code would just do that for the path when extracting the full URL, which made a subsequent curl_url_get() of the path to (unexpectedly) still return it without the leading path. Amend lib1560 to verify this. Clarify the curl_url_set() docs about it. Bug: https://curl.se/mail/lib-2023-06/0015.html Closes #11272 Reported-by: Pedro Henrique Dan Fandrich (7 Jun 2023) - runtests; give each server a unique log lock file Logs are written by several servers and all of them must be finished writing before the test results can be determined. This means each server must have its own lock file rather than sharing a single one, which is how it was done up to now. Previously, the first server to complete a test would clear the lock before the other server was done, which caused flaky tests. Lock files are now all found in their own directory, so counting locks equals counting the files in that directory. The result is that the proxy logs are now reliably written which actually changes the expected output for two tests. Fixes #11231 Closes #11259 - runtests: make test file directories in log/N Test files in subdirectories were not created after parallel test log directories were moved down a level due to a now-bad comparison. Follow-up to 92d7dd39 Ref #11264 Closes #11267 Daniel Stenberg (7 Jun 2023) - ws: make the curl_ws_meta() return pointer a const The returned info is read-only for the user. Closes #11261 - RELEASE-NOTES: synced - runtests: move parallel log dirs from logN to log/N Having several hundreds of them in there gets annoying. Closes #11264 Dan Fandrich (7 Jun 2023) - test447: move the test file into %LOGDIR Viktor Szakats (7 Jun 2023) - cmake: add support for "unity" builds Aka "jumbo" or "amalgamation" builds. It means to compile all sources per target as a single C source. This is experimental. You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake. It requires CMake 3.16 or newer. It makes builds (much) faster, allows for better optimizations and tends to promote less ambiguous code. Also add a new AppVeyor CI job and convert an existing one to use "unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job. Fix related issues: - add missing include guard to `easy_lock.h`. - rename static variables and functions (and a macro) with names reused across sources, or shadowed by local variables. - add an `#undef` after use. - add a missing `#undef` before use. - move internal definitions from `ftp.h` to `ftp.c`. - `curl_memory.h` fixes to make it work when included repeatedly. - stop building/linking curlx bits twice for a static-mode curl tool. These caused doubly defined symbols in unity builds. - silence missing extern declarations compiler warning for ` _CRT_glob`. - fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`. - fix colliding static symbols in debug mode: `debugtime()` and `statename`. - rename `ssl_backend_data` structure to unique names for each TLS-backend, along with the `ssl_connect_data` struct member referencing them. This required adding casts for each access. - add workaround for missing `[P]UNICODE_STRING` types in certain Windows builds when compiling `lib/ldap.c`. To support "unity" builds, we had to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows `schannel.h` option) _globally_. This caused an indirect inclusion of Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled as well. This requires `[P]UNICODE_STRING` types, which is apperantly not defined automatically (as seen with both MSVS and mingw-w64). This patch includes `<subauth.h>` to fix it. Ref: https://github.com/curl/curl/runs/13987772013 Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&vie w=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f 38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c - tweak unity builds to compile `lib/memdebug.c` separately in memory trace builds to avoid PP confusion. - force-disable unity for test programs. - do not compile and link libcurl sources to libtests _twice_ when libcurl is built in static mode. KNOWN ISSUES: - running tests with unity builds may fail in cases. - some build configurations/env may not compile in unity mode. E.g.: https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfu auwl8q#L250 Ref: https://github.com/libssh2/libssh2/issues/1034 Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html Ref: https://en.wikipedia.org/wiki/Unity_build Closes #11095 Daniel Stenberg (7 Jun 2023) - examples/websocket.c: websocket example using CONNECT_ONLY Closes #11262 - websocket-cb: example doing WebSocket download using callback Very basic Closes #11260 - test/.gitignore: ignore log* Dan Fandrich (5 Jun 2023) - runtests: document the -j parallel testing option Reported-by: Daniel Stenberg Ref: #10818 Closes #11255 - runtests: create multiple test runners when requested Parallel testing is enabled by using a nonzero value for the -j option to runtests.pl. Performant values seem to be about 7*num CPU cores, or 1.3*num CPU cores if Valgrind is in use. Flaky tests due to improper log locking (bug #11231) are exacerbated while parallel testing, so it is not enabled by default yet. Fixes #10818 Closes #11246 - runtests: handle repeating tests in multiprocess mode Such as what happens with the --repeat option. Some functions are changed to pass the runner ID instead of relying on the non-unique test number. Ref: #10818 - runtests: buffer logmsg while running singletest() This allows all messages relating to a single test case to be displayed together at the end of the test. Ref: #10818 - runtests: call initserverconfig() in the runner This must be done so variables pick up the runner's unique $LOGDIR. Ref: #10818 - runtests: use a per-runner random seed Each runner needs a unique random seed to reduce the chance of port number collisions. The new scheme uses a consistent per-runner source of randomness which results in deterministic behaviour, as it did before. Ref: #10818 - runtests: complete main test loop refactor for multiple runners The main test loop is now able to handle multiple runners, or no additional runner processes at all. At most one process is still created, however. Ref: #10818 - runtests: prepare main test loop for multiple runners Some variables are expanded to arrays and hashes so that multiple runners can be used for running tests. Ref: #10818 Stefan Eissing (5 Jun 2023) - bufq: make write/pass methods more robust - related to #11242 where curl enters busy loop when sending http2 data to the server Closes #11247 Boris Verkhovskiy (5 Jun 2023) - tool_getparam: fix comment Closes #11253 Raito Bezarius (5 Jun 2023) - haproxy: add --haproxy-clientip flag to spoof client IPs CURLOPT_HAPROXY_CLIENT_IP in the library Closes #10779 Daniel Stenberg (5 Jun 2023) - curl: add --ca-native and --proxy-ca-native These are two boolean options to ask curl to use the native OS's CA store when verifying TLS servers. For peers and for proxies respectively. They currently only have an effect for curl on Windows when built to use OpenSSL for TLS. Closes #11049 Viktor Szakats (5 Jun 2023) - build: drop unused/redundant `HAVE_WINLDAP_H` Sources did not use it. Autotools used it when checking for the `winldap` library, which is redundant. With CMake, detection was broken: ``` Run Build Command(s):/usr/local/Cellar/cmake/3.26.3/bin/cmake -E env VERBOSE= 1 /usr/bin/make -f Makefile cmTC_2d8fe/fast && /Library/Developer/CommandLine Tools/usr/bin/make -f CMakeFiles/cmTC_2d8fe.dir/build.make CMakeFiles/cmTC_2 d8fe.dir/build Building C object CMakeFiles/cmTC_2d8fe.dir/HAVE_WINLDAP_H.c.obj /usr/local/opt/llvm/bin/clang --target=x86_64-w64-mingw32 --sysroot=/usr/loca l/opt/mingw-w64/toolchain-x86_64 -D_WINSOCKAPI_="" -I/my/quictls/x64-ucrt/usr /include -I/my/zlib/x64-ucrt/usr/include -I/my/brotli/x64-ucrt/usr/include -W no-unused-command-line-argument -D_UCRT -DCURL_HIDDEN_SYMBOLS -DHAVE_SSL_SE T0_WBIO -DHAS_ALPN -DNGHTTP2_STATICLIB -DNGHTTP3_STATICLIB -DNGTCP2_STATICLIB -DUSE_MANUAL=1 -fuse-ld=lld -Wl,-s -static-libgcc -lucrt -Wextra -Wall -p edantic -Wbad-function-cast -Wconversion -Winline -Wmissing-declarations -Wmi ssing-prototypes -Wnested-externs -Wno-long-long -Wno-multichar -Wpointer-ari th -Wshadow -Wsign-compare -Wundef -Wunused -Wwrite-strings -Wcast-align -Wde claration-after-statement -Wempty-body -Wendif-labels -Wfloat-equal -Wignored -qualifiers -Wno-format-nonliteral -Wno-sign-conversion -Wno-system-headers - Wstrict-prototypes -Wtype-limits -Wvla -Wshift-sign-overflow -Wshorten-64-to- 32 -Wdouble-promotion -Wenum-conversion -Wunused-const-variable -Wcomma -Wmis sing-variable-declarations -Wassign-enum -Wextra-semi-stmt -MD -MT CMakeFile s/cmTC_2d8fe.dir/HAVE_WINLDAP_H.c.obj -MF CMakeFiles/cmTC_2d8fe.dir/HAVE_WINL DAP_H.c.obj.d -o CMakeFiles/cmTC_2d8fe.dir/HAVE_WINLDAP_H.c.obj -c /my/curl/b ld-cmake-llvm-x64-shared/CMakeFiles/CMakeScratch/TryCompile-3JP6dR/HAVE_WINLD AP_H.c In file included from /my/curl/bld-cmake-llvm-x64-shared/CMakeFiles/CMakeScra tch/TryCompile-3JP6dR/HAVE_WINLDAP_H.c:2: In file included from /usr/local/opt/mingw-w64/toolchain-x86_64/x86_64-w64-mi ngw32/include/winldap.h:17: In file included from /usr/local/opt/mingw-w64/toolchain-x86_64/x86_64-w64-mi ngw32/include/schnlsp.h:9: In file included from /usr/local/opt/mingw-w64/toolchain-x86_64/x86_64-w64-mi ngw32/include/schannel.h:10: /usr/local/opt/mingw-w64/toolchain-x86_64/x86_64-w64-mingw32/include/wincrypt .h:5041:254: error: unknown type name 'PSYSTEMTIME' WINIMPM PCCERT_CONTEXT WINAPI CertCreateSelfSignCertificate (HCRYPTPROV_OR_ NCRYPT_KEY_HANDLE hCryptProvOrNCryptKey, PCERT_NAME_BLOB pSubjectIssuerBlob, DWORD dwFlags, PCRYPT_KEY_PROV_INFO pKeyProvInfo, PCRYPT_ALGORITHM_IDENTIFIER pSignatureAlgorithm, PSYSTEMTIME pStartTime, PSYSTEMTIME pEndTime, PCERT_EXT ENSIONS pExtensions); ^ /usr/local/opt/mingw-w64/toolchain-x86_64/x86_64-w64-mingw32/include/wincrypt .h:5041:278: error: unknown type name 'PSYSTEMTIME' WINIMPM PCCERT_CONTEXT WINAPI CertCreateSelfSignCertificate (HCRYPTPROV_OR_ NCRYPT_KEY_HANDLE hCryptProvOrNCryptKey, PCERT_NAME_BLOB pSubjectIssuerBlob, DWORD dwFlags, PCRYPT_KEY_PROV_INFO pKeyProvInfo, PCRYPT_ALGORITHM_IDENTIFIER pSignatureAlgorithm, PSYSTEMTIME pStartTime, PSYSTEMTIME pEndTime, PCERT_EXT ENSIONS pExtensions); ^ 2 errors generated. make[1]: *** [CMakeFiles/cmTC_2d8fe.dir/HAVE_WINLDAP_H.c.obj] Error 1 make: *** [cmTC_2d8fe/fast] Error 2 exitCode: 2 ``` Cherry-picked from #11095 88e4a21ff70ccef391cf99c8165281ff81374503 Reviewed-by: Daniel Stenberg Closes #11245 Daniel Stenberg (5 Jun 2023) - urlapi: scheme starts with alpha Add multiple tests to lib1560 to verify Fixes #11249 Reported-by: ad0p on github Closes #11250 - RELEASE-NOTES: synced - CURLOPT_MAIL_RCPT_ALLOWFAILS: replace CURLOPT_MAIL_RCPT_ALLLOWFAILS Deprecate the name using three Ls and prefer the name with two. Replaces #10047 Closes #11218 - tests/servers: generate temp names in /tmp for unix domain sockets ... instead of putting them in the regular pid directories because systems generally have strict length requirements for the path name to be shorter than 107 bytes and we easily hit that boundary otherwise. The new concept generates two random names: one for the socks daemon and one for http. Reported-by: Andy Fiddaman Fixes #11152 Closes #11166 Stefan Eissing (2 Jun 2023) - http2: better support for --limit-rate - leave transfer loop when --limit-rate is in effect and has been received - adjust stream window size to --limit-rate plus some slack to make the server observe the pacing we want - add test case to confirm behaviour Closes #11115 - curl_log: evaluate log statement only when transfer is verbose Closes #11238 Daniel Stenberg (2 Jun 2023) - libssh2: provide error message when setting host key type fails Ref: https://curl.se/mail/archive-2023-06/0001.html Closes #11240 Igor Todorovski (2 Jun 2023) - system.h: remove __IBMC__/__IBMCPP__ guards and apply to all z/OS compiles Closes #11241 Daniel Stenberg (2 Jun 2023) - docs/SECURITY-PROCESS.md: link to example of previous critical flaw Mark Seuffert (2 Jun 2023) - README.md: updated link to opencollective Closes #11232 Daniel Stenberg (1 Jun 2023) - libssh2: use custom memory functions Because of how libssh2_userauth_keyboard_interactive_ex() works: the libcurl callback allocates memory that is later free()d by libssh2, we must set the custom memory functions. Reverts 8b5f100db388ee60118c08aa28 Ref: https://github.com/libssh2/libssh2/issues/1078 Closes #11235 - test447: test PUTting a file that grows ... and have curl trim the end when it reaches the expected total amount of bytes instead of over-sending. Reported-by: JustAnotherArchivist on github Closes #11223 - curl: count uploaded data to stop at the originally given size Closes #11223 Fixes #11222 Reported-by: JustAnotherArchivist on github - tool: remove exclamation marks from error/warning messages - tool: use errorf() for error output Convert a number of fprintf() calls. - tool: remove newlines from all helpf/notef/warnf/errorf calls Make voutf() always add one. Closes #11226 - tests/servers.pm: pick unused port number with a server socket This change replaces the previous method of picking a port number at random to try to start servers on, then retrying up to ten times with new random numbers each time, with a function that creates a server socket on port zero, thereby getting a suitable random port set by the kernel. That server socket is then closed and that port number is used to setup the actual test server on. There is a risk that *another* server can be started on the machine in the time gap, but the server verification feature will detect that. Closes #11220 - RELEASE-NOTES: synced bump to 8.2.0 Alejandro R. Sedeño (31 May 2023) - configure: fix run-compiler for old /bin/sh If you try to assign and export on the same line on some older /bin/sh implementations, it complains: ``` $ export "NAME=value" NAME=value: is not an identifier ``` This commit rewrites run-compiler's assignments and exports to work with old /bin/sh, splitting assignment and export into two separate statements, and only quote the value. So now we have: ``` NAME="value" export NAME ``` While we're here, make the same change to the two supporting assign+export lines preceeding the script to be consistent with how exports work throughout the rest of configure.ac. Closes #11228 Philip Heiduck (31 May 2023) - circleci: install impacket & wolfssl 5.6.0 Closes #11221 Daniel Stenberg (31 May 2023) - tool_urlglob: use curl_off_t instead of longs To handle more globs better (especially on Windows) Closes #11224 Dan Fandrich (30 May 2023) - scripts: Fix GHA matrix job detection in cijobs.pl The parsing is pretty brittle and it broke detecting some jobs at some point. Also, detect if Windows is used in GHA. - runtests: abort test run after failure without -a This was broken in a recent refactor and test runs would not stop. Follow-up to d4a1b5b6 Reported-by: Daniel Stenberg Fixes #11225 Closes #11227 Version 8.1.2 (30 May 2023) Daniel Stenberg (30 May 2023) - RELEASE-NOTES: synced 8.1.2 release - THANKS: contributors from 8.1.2 - lib1560: verify more scheme guessing - on 2nd level domains - on names without dots As mentioned in #11161, "imap.com" will be guessed IMAP Closes #11219 - page-header: minor wording polish in the URL segment Closes #11217 - page-header: mention curl version and how to figure out current release Closes #11216 - RELEASE-NOTES: synced - configure: without pkg-config and no custom path, use -lnghttp2 Reported-by: correctmost on github Fixes #11186 Closes #11210 Stefan Eissing (28 May 2023) - curl: cache the --trace-time value for a second - caches HH:MM:SS computed and reuses it for logging during the same second. - common function for plain log line start formatting Closes #11211 Kev Jackson (28 May 2023) - libcurl.m4: remove trailing 'dnl' that causes this to break autoconf Closes #11212 Stefan Eissing (26 May 2023) - http3: send EOF indicator early as possible - ngtcp2 and quiche implementations relied on the DONE_SEND event to forward the EOF for uploads to the libraries. This often result in a last 0 length EOF data. Tracking the amount of data left to upload allows EOF indication earlier. - refs #11205 where CloudFlare DoH servers did not like to receive the initial upload DATA without EOF and returned a 400 Bad Request Reported-by: Sergey Fionov Fixes #11205 Closes #11207 Daniel Stenberg (26 May 2023) - scripts/contri*sh: no longer grep -v ' ' Originally these scripts filtered out names that have no space so that they better avoid nick names not intended for credits. Such names are not too commonly used, plus we now give credit even to those. Additionally: non-latin names, like Asian, don't have spaces at all so they were also filtered out and had to be manually added which made it an error-prone operation where Asian names eventually easily fell off by mistake. Closes #11206 - cf-socket: restore Curl_sock_assign_addr() Regression since it was not private. Also used by msh3.c Follow-up to 8e85764b7bd7f05f5 Reported-by: Gisle Vanem Fixes #11202 Closes #11204 - RELEASE-NOTES: synced Taken down to 8.1.2 now for pending patch release - libssh: when keyboard-interactive auth fails, try password The state machine had a mistake in that it would not carry on to that next step. This also adds a verbose output what methods that are available from the server and renames the macros that change to the next auth methods to try. Reported-by: 左潇峰 Fixes #11196 Closes #11197 Emanuele Torre (25 May 2023) - configure: fix build with arbitrary CC and LD_LIBRARY_PATH Since ./configure and processes that inherit its environment variables are the only callers of the run-compiler script, we can just save the current value of the LD_LIBRARY_PATH and CC variables to another pair of environment variables, and make run-compiler a static script that simply restores CC and LD_LIBRARY_PATH to the saved value, and before running the compiler. This avoids having to inject the values of the variables in the script, possibly causing problems if they contains spaces, quotes, and other special characters. Also add exports in the script just in case LD_LIBRARY_PATH and CC are not already in the environment. follow-up from 471dab2 Closes #11182 Daniel Stenberg (25 May 2023) - urlapi: remove superfluous host name check ... as it is checked later more proper. Closes #11195 Stefan Eissing (25 May 2023) - http2: fix EOF handling on uploads with auth negotiation - doing a POST with `--digest` does an override on the initial request with `Content-Length: 0`, but the http2 filter was unaware of that and expected the originally request body. It did therefore not send a final DATA frame with EOF flag to the server. - The fix overrides any initial notion of post size when the `done_send` event is triggered by the transfer loop, leading to the EOF that is necessary. - refs #11194. The fault did not happen in testing, as Apache httpd never tries to read the request body of the initial request, sends the 401 reply and closes the stream. The server used in the reported issue however tried to read the EOF and timed out on the request. Reported-by: Aleksander Mazur Fixes #11194 Cloes #11200 Daniel Stenberg (23 May 2023) - RELEASE-NOTES: synced bump to 8.2.0 - lib: remove unused functions, make single-use static Closes #11174 - scripts/singleuse.pl: add more API calls Christian Hesse (23 May 2023) - configure: quote the assignments for run-compiler Building for multilib failed, as the compiler command contains an extra argument. That needs quoting. Regression from b78ca50cb3dda361f9c1 Fixes #11179 Closes #11180 Daniel Stenberg (23 May 2023) - misc: fix spelling mistakes Reported-by: musvaage on github Fixes #11171 Closes #11172 Version 8.1.1 (23 May 2023) Daniel Stenberg (23 May 2023) - RELEASE-NOTES: synced curl 8.1.1 - THANKS: contributors from the 8.1.1 release Dan Fandrich (22 May 2023) - docs: fix fuzzing documentation link Follow-up to 4c712a1b - CI: add an Alpine build with MUSL MUSL is another libc implementation which has its own unique issues worth testing. Ref: #11140 Closes #11178 - runtests: add a missing \n at the end of a log message correctmost on github (22 May 2023) - SECURITY-PROCESS.md: link security advisory doc and fix typo Closes #11177 Daniel Stenberg (22 May 2023) - TODO: build curl with Windows Unicode support Closes #7229 - KNOWN_BUGS: hyper memory-leaks Closes #10803 Stefan Eissing (22 May 2023) - http/2: unstick uploads - refs #11157 and #11175 where uploads get stuck or lead to RST streams - fixes our h2 send behaviour to continue sending in the nghttp2 session as long as it wants to. This will empty our send buffer as long as the remote stream/connection window allows. - in case the window is exhausted, the data remaining in the send buffer will wait for a WINDOW_UPDATE from the server. Which is a socket event that engages our transfer loop again - the problem in the issue was that we did not exhaust the window, but left data in the sendbuffer and no further socket events did happen. The server was just waiting for us to send more. - relatedly, there was an issue fixed that closing a stream with KEEP_HOLD set kept the transfer from shutting down - as it should have - leading to a timeout. Closes #11176 Daniel Stenberg (21 May 2023) - workflows/macos: add a job using gcc + debug + secure transport Jay Satiro (21 May 2023) - lib: fix conversion warnings with gcc on macOS Daniel Stenberg (21 May 2023) - sectransp.c: make the code c89 compatible Follow-up to dd2bb485521c2ec713001b3a Reported-by: FeignClaims on github Fixes #11155 Closes #11159 Emanuele Torre (21 May 2023) - Revert "urlapi: respect CURLU_ALLOW_SPACE and CURLU_NO_AUTHORITY for redirect s" This reverts commit df6c2f7b544f1f35f2a3e0be11f345affeb6fe9c. (It only keep the test case that checks redirection to an absolute URL without hostname and CURLU_NO_AUTHORITY). I originally wanted to make CURLU_ALLOW_SPACE accept spaces in the hostname only because I thought curl_url_set(CURLUPART_URL, CURLU_ALLOW_SPACE) was already accepting them, and they were only not being accepted in the hostname when curl_url_set(CURLUPART_URL) was used for a redirection. That is not actually the case, urlapi never accepted hostnames with spaces, and a hostname with a space in it never makes sense. I probably misread the output of my original test when I they were normally accepted when using CURLU_ALLOW_SPACE, and not redirecting. Some other URL parsers seems to allow space in the host part of the URL, e.g. both python3's urllib.parse module, and Chromium's javascript URL object allow spaces (chromium percent escapes the spaces with %20), (they also both ignore TABs, and other whitespace characters), but those URLs with spaces in the hostname are useless, neither python3's requests module nor Chromium's window.location can actually use them. There is no reason to add support for URLs with spaces in the host, since it was not a inconsistency bug; let's revert that patch before it makes it into release. Sorry about that. I also reverted the extra check for CURLU_NO_AUTHORITY since that does not seem to be necessary, CURLU_NO_AUTHORITY already worked for redirects. Closes #11169 Dan Fandrich (20 May 2023) - runtests: use the correct fd after select The code was using the wrong fd when determining which runner was ready with a response. Ref: #10818 Closes #11160 - test425: fix the log directory for the upload This must be %LOGDIR to let it work with parallel tests. Ref: #10969 - runtests: handle interrupted reads from IPC pipes These can be interrupted by signals, especially SIGINT to shut down, and must be restarted so the IPC call arrives correctly. If the read just returns an error instead, the IPC calling state will go out of sync and a proper shutdown won't happen. Ref: #10818 Stefan Eissing (20 May 2023) - http2: upload improvements Make send buffer smaller to have progress and "upload done" reporting closer to reality. Fix handling of send "drain" condition to no longer trigger once the transfer loop reports it is done sending. Also do not trigger the send "drain" on RST streams. Background: - a upload stall was reported in #11157 that timed out - test_07_33a reproduces a problem with such a stall if the server 404s the request and RSTs the stream. - test_07_33b verifies a successful PUT, using the parameters from #11157 and checks success Ref: #11157 Closes #11165 - http2: increase stream window size to 10 MB Reported-by: pandada8 on github Fixes #11162 Closes #11167 Daniel Stenberg (20 May 2023) - lib: rename struct 'http_req' to 'httpreq' Because FreeBSD 14 kidnapped the name. Ref: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=271526 Fixes #11163 Closes #11164 Viktor Szakats (20 May 2023) - cmake: avoid `list(PREPEND)` for compatibility `list(PREPEND)` requires CMake v3.15, our minimum is v3.7. Ref: https://cmake.org/cmake/help/latest/command/list.html#prepend Regression from 1e3319a167d2f32d295603167486e9e88af9bb4e Reported-by: Keitagit-kun on Github Fixes #11141 Closes #11144 Daniel Stenberg (19 May 2023) - RELEASE-NOTES: synced Stefan Eissing (19 May 2023) - ngtcp2: proper handling of uint64_t when adjusting send buffer Fixes #11149 Closes #11153 - ngtcp2: fix compiler warning about possible null-deref - compiler analyzer did not include the call context for this static function where the condition had already been checked. - eleminating the problem by making stream a call parameter Fixes #11147 Closes #11151 Emanuele Torre (19 May 2023) - docs: document that curl_url_cleanup(NULL) is a safe no-op This has always been the case, but it was not documented. The paragraph was copied verbatim from curl_easy_cleanup.3 Closes #11150 Antoine Pitrou (19 May 2023) - select: avoid returning an error on EINTR from select() or poll() This was already done for the poll() and select() calls made directly from Curl_poll(), but was missed in Curl_wait_ms(), which is called when there are no fds to wait on. Fixes #11135 Closes #11143 Daniel Stenberg (19 May 2023) - vquic.c: make recvfrom_packets static, avoid compiler warning warning: no previous prototype for 'recvfrom_packets' Reported-by: Keitagit-kun on github Fixes #11146 Closes #11148 - urlapi: allow numerical parts in the host name It can only be an IPv4 address if all parts are all digits and no more than four parts, otherwise it is a host name. Even slightly wrong IPv4 will now be passed through as a host name. Regression from 17a15d88467 shipped in 8.1.0 Extended test 1560 accordingly. Reported-by: Pavel Kalyugin Fixes #11129 Closes #11131 Emilio Cobos Álvarez (19 May 2023) - http2: double http request parser max line length This works around #11138, by doubling the limit, and should be a relatively safe fix. Ideally the buffer would grow as needed and there would be no need for a limit? But that might be follow-up material. Fixes #11138 Closes #11139 Emanuele Torre (18 May 2023) - configure: fix --help alignment AC_ARG_ENABLE seems to only trim off whitespace from the start and end of its help-string argument, while prepending two spaces of indentation to all lines. This means that the two spaces of indentation between the --enable-rtsp and the --disable-rtsp line were not removed causing ./configure --help to print: Optional Features: [...] --enable-rtsp Enable RTSP support --disable-rtsp Disable RTSP support I removed the indentation to fix the issue, now it prints: Optional Features: [...] --enable-rtsp Enable RTSP support --disable-rtsp Disable RTSP support The --enable-hsts and --disable-hsts lines had the same problems, and have been fixed too. Closes #11142 Deal(一线灵) (18 May 2023) - cmake: repair cross compiling It cannot *run* code for testing purposes when cross-compiling. Closes #11130 Daniel Stenberg (18 May 2023) - configure: generate a script to run the compiler in the CURL_RUN_IFELSE macro, with LD_LIBRARY_PATH set to the value of the configure invoke, and not the value that might be used later, intended for the execution of the output the compiler ouputs. For example when the compiler uses the same library (like libz) that configure checks for. Reported-by: Jonas Bülow Fixes #11114 Closes #11120 Stefan Eissing (18 May 2023) - cf-socket: completely remove the disabled USE_RECV_BEFORE_SEND_WORKAROUND Closes #11118 Emanuele Torre (18 May 2023) - urlapi: respect CURLU_ALLOW_SPACE and CURLU_NO_AUTHORITY for redirects curl_url_set(uh, CURLUPART_URL, redirurl, flags) was not respecing CURLU_ALLOW_SPACE and CURLU_NO_AUTHORITY in the host part of redirurl when redirecting to an absolute URL. Closes #11136 Colin Cross (18 May 2023) - hostip: move easy_lock.h include above curl_memory.h Similar to #9561, move easy_lock.h above curl_memory.h to fix building against musl libc. Closes #11140 Hind Montassif (18 May 2023) - curl_easy_getinfo: clarify on return data types Closes #11126 Emanuele Torre (18 May 2023) - checksrc: disallow spaces before labels Out of 415 labels throughout the code base, 86 of those labels were not at the start of the line. Which means labels always at the start of the line is the favoured style overall with 329 instances. Out of the 86 labels not at the start of the line: * 75 were indented with the same indentation level of the following line * 8 were indented with exactly one space * 2 were indented with one fewer indentation level then the following line * 1 was indented with the indentation level of the following line minus three space (probably unintentional) Co-Authored-By: Viktor Szakats Closes #11134 Daniel Stenberg (18 May 2023) - cookie: update the comment on cookie length and size limits To refer to the proper cookie RFC and the upcoming RFC refresh. Closes #11127 - url: provide better error message when URLs fail to parse By providing the URL API error message into the error message. Ref: #11129 Closes #11137 - RELEASE-NOTES: synced bumped to 8.1.1 Jon Rumsey (18 May 2023) - os400: update chkstrings.c Compensate changes for recent changes to urldata.h to reclassify STRING_AWS_SIGV4. Fixes #11132 Closes #11133 Version 8.1.0 (17 May 2023) Daniel Stenberg (17 May 2023) - RELEASE-NOTES: synced - THANKS: contributors from the 8.1.0 release - hostip: include easy_lock.h before using GLOBAL_INIT_IS_THREADSAFE Since that header file is the only place that define can be defined. Reported-by: Marc Deslauriers Follow-up to 13718030ad4b3209 Closes #11121 Thomas Taylor (16 May 2023) - aws-sigv4.d: fix region identifier in example Closes #11117 Philip Heiduck (15 May 2023) - mlc_config.json: remove this linkcheck CI job config file Closes #11113 Daniel Silverstone (15 May 2023) - ssh: Add support for libssh2 read timeout Hook the new (1.11.0 or newer) libssh2 support for setting a read timeout into the SERVER_RESPONSE_TIMEOUT option. With this done, clients can use the standard curl response timeout setting to also control the time that libssh2 will wait for packets from a slow server. This is necessary to enable use of very slow SFTP servers. Signed-off-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk> Closes #10965 Osama Albahrani (14 May 2023) - GIT-INFO: add --with-openssl Closes #11110 Daniel Stenberg (13 May 2023) - RELEASE-NOTES: synced Marcel Raad (13 May 2023) - md(4|5): don't use deprecated iOS functions They are marked as deprecated in iOS 13.0, which might result in warnings-as-errors. Also, use `*_MIN_REQUIRED` instead of `*_MIN_ALLOWED`, which seems to be what's currently used. Bug: https://github.com/curl/curl/issues/11098 Closes https://github.com/curl/curl/pull/11102 - md4: only build when used Its only usage in curl_ntlm_core.c is guarded by `USE_CURL_NTLM_CORE`, so let's use this here too. Ref: https://github.com/curl/curl/issues/11098 Closes https://github.com/curl/curl/pull/11102 Vítor Galvão (12 May 2023) - write-out.d: Use response_code in example Closes #11107 Shohei Maeda (12 May 2023) - url: fix null dispname for --connect-to option Closes #11106 Daniel Stenberg (12 May 2023) - test2306: verify getting a second response with folded headers Reproduces the isue #11101 and verifies the fix. Verifies a17b2a503f - headers: clear (possibly) lingering pointer in init The "prevhead" pointer is used for the headers storage but was not cleared correctly in init, which made it possible to act up when a handle is reused. Reported-by: Steve Herrell Fixes #11101 Closes #11103 - RELEASE-NOTES: synced - ngtcp2: use 0.15.0 - nghttp3 0.11.0 - nghttp2 1.53.0 Adapt to new API calls Closes #11031 Jay Satiro (10 May 2023) - openssl: fix indent Daniel Stenberg (10 May 2023) - CURLOPT_DNS_CACHE_TIMEOUT.3: fix spelling Follow-up to 9ed7d56e044f5aa1b29 Closes #11096 - hostip: use time_t for storing oldest DNS entry Theoretically, the oldest time could overflow an int. In practice that won't happen, but let's do this to please analyzers. Follow-up to 9ed7d56e044f5aa1b2928ccde6245d0 Pointed out by Coverity. Closes #11094 - http: free the url before storing a new copy To avoid a memory-leak. Reported-by: Hiroki Kurosawa Closes #11093 - compressed.d: clarify the words on "not notifying headers" Reported-by: Dylan Anthony Fixes #11091 Closes #11092 - libssh2: free fingerprint better Reported-by: Wei Chong Tan Closes #11088 - CURLOPT_IPRESOLVE.3: clarify that this for host names, not IP addresses Reported-by: Harry Sintonen Closes #11087 - hostip: enforce a maximum DNS cache size independent of timeout value To reduce the damage an application can cause if using -1 or other ridiculous timeout values and letting the cache live long times. The maximum number of entries in the DNS cache is now totally arbitrarily and hard-coded set to 29999. Closes #11084 - hostip: store dns timeout as 'int' ... because it set and held as an 'int' elsewhere and can never be larger. - RELEASE-NOTES: synced - tool_operate: refuse (--data or --form) and --continue-at combo libcurl assumes that a --continue-at resumption is done to continue an upload using the read callback and neither --data nor --form use that and thus won't do what the user wants. Whatever the user wants with this strange combination. Add test 426 to verify. Reported-by: Smackd0wn on github Fixes #11081 Closes #11083 - transfer: refuse POSTFIELDS + RESUME_FROM combo The code assumes that such a resume is wanting to continue an upload using the read callback, and since POSTFIELDS is done without callback libcurl will just misbehave. This combo will make the transfer fail with CURLE_BAD_FUNCTION_ARGUMENT with an explanation in the error message. Reported-by: Smackd0wn on github Fixes #11081 Closes #11083 - ipv4.d/ipv6.d: they are "mutex", not "boolean" ... which for example means they do not have --no-* versions. Reported-by: Harry Sintonen Fixes #11085 Closes #11086 - docs/SECURITY-ADVISORY.md: how to write a curl security advisory Closes #11080 nobedee on github (5 May 2023) - MANUAL.md: add dict example for looking up a single definition Closes #11077 Dan Fandrich (5 May 2023) - runtests: fix -c option when run with valgrind The curl binary argument wasn't being quoted properly. This seems to have broken at some point after quoting was added in commit 606b29fe. Reported-by: Daniel Stenberg Ref: #11073 Fixes #11074 Closes #11076 - runtests: support creating more than one runner process The controller currently only creates and uses one, but more are now possible. Ref: #10818 - runtests: spawn a new process for the test runner When the -j option is given, a new process is spawned in which the test programs are run and from which test servers are started. Only one process can be started at once, but this is sufficient to test that the infrastructure can isolate those functions in a new task. There should be no visible difference between the two modes at the moment. Ref: #10818 Closes #11064 - runtests: turn singletest() into a state machine This allows it to run in a non-blocking manner. Ref: #10818 - runtests: change runner interface to be asynchronous Program arguments are marshalled and then written to the end of a pipe which is later read from and the arguments unmarshalled before the desired function is called normally. The function return values are then marshalled and written into another pipe when is later read from and unmarshalled before being returned to the caller. The implementation is currently blocking but can be made non-blocking without any changes to the API. This allows calling multiple runners without blocking in the future. Ref: #10818 - runtests: call citest_finishtest in singletest This is where citest_starttest is called. Ref: #10818 - runtests: add a runner initialization function This sets up the runner environment to start running tests. Ref: #10818 - runtests: remove directory from server filename variables There will soon be multiple log directories so the paths will no longer be static in runtests.pl. Also, get rid of $SERVER2IN which was not used. Ref: #10818 - runtests: reduce package exports after refactoring Some recent refactoring made these export no longer necessary. Also, stop displaying the Unix socket paths at startup since there will soon be many of them and they're not that interesting. Ref: #10818 - runtests: use a function to obtain $LOGDIR for a test This will no longer be static soon. Ref: #10818 Jay Satiro (5 May 2023) - tool_cb_hdr: Fix 'Location:' formatting for early VTE terminals - Disable hyperlink formatting for the 'Location:' header value in VTE 0.48.1 and earlier, since it is buggy in some of those versions. Prior to this change those terminals may show the location header value as gibberish or show it twice. Ref: https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda#backw ard-compatibility Fixes https://github.com/curl/curl/issues/10428 Closes https://github.com/curl/curl/pull/11071 François Michel (3 May 2023) - quiche: disable pacing while pacing is not actually performed Closes #11068 Daniel Stenberg (2 May 2023) - easy_cleanup: require a "good" handle to act By insisting that the passed in handle is "good" (the magic number is intact), this can limit the potential damage if a bad pointer is passed in. Like when this function is called twice on the same handle pointer. Ref: #10964 Closes #11061 Andreas Falkenhahn (1 May 2023) - amiga: Fix CA certificate paths for AmiSSL and MorphOS AmiSSL stores certificates in `AmiSSL:Certs` and MorphOS stores them in `MOSSYS:Data/SSL/curl-ca-bundle.crt`. Closes https://github.com/curl/curl/pull/11059 Daniel Stenberg (30 Apr 2023) - http2: (void)-mark when we explicitly ignore the return code When h2_progress_egress() is called. Pointed out by Coverity. Closes #11057 - checksrc: find bad indentation in conditions without open brace If the previous line starts with if/while/for AND ends with a closed parenthesis and there's an equal number of open and closed parentheses on that line, verify that this line is indented $indent more steps, if not a cpp line. Also adjust the fall-out from this fix. Closes #11054 Diogo Teles Sant'Anna (28 Apr 2023) - CI: Set minimal permissions on workflow ngtcp2-quictls.yml Signed-off-by: Diogo Teles Sant'Anna <diogoteles@google.com> Closes #11055 Dan Fandrich (28 Apr 2023) - CI: use another glob syntax for matching files on Appveyor The previous globbing syntax was not matching files recursively in directories, so try appending a /* to more closely match the examples at https://www.appveyor.com/docs/how-to/filtering-commits/ Daniel Stenberg (28 Apr 2023) - multi: add multi-ignore logic to multi_socket_action The multi-ignore logic that was previously applied to curl_multi_perform() (#10750) is here applied to the loop within curl_multi_socket_action() to make it use the same optimization: most handles have the same signal-ignore option state so this drastically reduces the number of ignore/unignore calls per libcurl function invoke. Follow-up to bc90308328afb8 Closes #11045 Stefan Eissing (28 Apr 2023) - http2: do flow window accounting for cancelled streams - nghttp2 does not free connection level window flow for aborted streams - when closing transfers, make sure that any buffered response data is "given back" to the flow control window - add tests test_02_22 and test_02_23 to reproduce Closes #11052 - pingpong: fix compiler warning "assigning an enum to unsigned char" Closes #11050 Daniel Stenberg (28 Apr 2023) - configure: fix detection of apxs (for httpd) The condition check was turned the wrong way around! Closes #11051 Viktor Szakats (28 Apr 2023) - ci: `-Wno-vla` no longer necessary We handle this issue in the source now. Follow-up to b725fe1944b45406676ea3aff333ae3085a848d9 Reviewed-by: Marcel Raad Reviewed-by: Daniel Stenberg Closes #11048 Marcel Raad (28 Apr 2023) - tests/http: make curl_setup.h the first include This is required for the macros there to take effect for system libraries. Specifically, including the system libraries first led to warnings about `_FILE_OFFSET_BITS` being redefined in curl_config.h on the Solaris autobuilds for ws-data.c and ws-pingpong.c. Also make the curl includes come first for the other source files here for consistency. Closes https://github.com/curl/curl/pull/11046 Emanuele Torre (27 Apr 2023) - checksrc: check for spaces before the colon of switch labels Closes #11047 Daniel Stenberg (27 Apr 2023) - RELEASE-NOTES: synced - libssh: tell it to use SFTP non-blocking Reported-by: Andreas Huebner Fixes #11020 Closes #11039 Stefan Eissing (27 Apr 2023) - http2: enlarge the connection window - fixes stalled connections - Make the connection window large enough, so that there is some room left should 99/100 streams be PAUSED by the application Reported-by: Paweł Wegner Fixes #10988 Closes #11043 Daniel Stenberg (27 Apr 2023) - checksrc: fix SPACEBEFOREPAREN for conditions starting with "*" The open paren check wants to warn for spaces before open parenthesis for if/while/for but also for any function call. In order to avoid catching function pointer declarations, the logic allows a space if the first character after the open parenthesis is an asterisk. I also spotted what we did not include "switch" in the check but we should. This check is a little lame, but we reduce this problem by not allowing that space for if/while/for/switch. Reported-by: Emanuele Torre Closes #11044 - docs: minor polish - "an HTTP*" (not "a") - remove a few contractions - remove a spurious "a" - reduce use of "I" in texts Closes #11040 - ws: fix CONT opcode check Detected by Coverity. Follow-up to 930c00c259 Closes #11037 Dan Fandrich (27 Apr 2023) - CI: switch the awslc builds to build out-of-tree This is a common configuration that should be tested to avoid regressions. The awsls cmake build was already out-of-tree so the automake build now joins it. Ref: #11006 - tests/http: fix out-of-tree builds Add both lib/ directories (src & build) to the search path so curl_setup.h and its dependencies can be found. Followup-to acd82c8b Ref: #11006 Closes #11036 Daniel Stenberg (27 Apr 2023) - urlapi: make internal function start with Curl_ Curl_url_set_authority() it is. Follow-up to acd82c8bfd Closes #11035 YX Hao (26 Apr 2023) - cf-socket: turn off IPV6_V6ONLY on Windows if it is supported IPV6_V6ONLY refs: https://en.wikipedia.org/wiki/IPv6#IPv4-mapped_IPv6_addresses https://github.com/golang/go/blob/master/src/net/ipsock_posix.go https://en.wikipedia.org/wiki/Unix-like https://learn.microsoft.com/en-us/windows/win32/winsock/ipproto-ipv6-socket-o ptions default value refs: https://datatracker.ietf.org/doc/html/rfc3493#section-5.3 https://www.kernel.org/doc/html/latest/networking/ip-sysctl.html#proc-sys-net -ipv6-variables Closes #10975 Daniel Stenberg (26 Apr 2023) - urldata: shrink *select_bits int => unsigned char - dselect_bits - cselect_bits ... are using less than 8 bits. Changed types and moved them towards the end of the structs to fit better. Closes #11025 Stefan Eissing (26 Apr 2023) - tests/http: more tests with specific clients - Makefile support for building test specific clients in tests/http/clients - auto-make of clients when invoking pytest - added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush - added test_02_21 for lib based downloads and pausing/unpausing transfers curl url parser: - added internal method `curl_url_set_authority()` for setting the authority part of a url (used for PUSH_PROMISE) http2: - made logging of PUSH_PROMISE handling nicer Placing python test requirements in requirements.txt files - separate files to base test suite and http tests since use and module lists differ - using the files in the gh workflows websocket test cases, fixes for we and bufq - bufq: account for spare chunks in space calculation - bufq: reset chunks that are skipped empty - ws: correctly encode frames with 126 bytes payload - ws: update frame meta information on first call of collect callback that fills user buffer - test client ws-data: some test/reporting improvements Closes #11006 Jay Satiro (26 Apr 2023) - libssh2: fix crash in keyboard callback - Always set the libssh2 'abstract' user-pointer to the libcurl easy handle associated with the ssh session, so it is always passed to the ssh keyboard callback. Prior to this change and since 8b5f100 (precedes curl 8.0.0), if libcurl was built without CURL_DEBUG then it could crash during the ssh auth phase due to a null dereference in the ssh keyboard callback. Reported-by: Andreas Falkenhahn Fixes https://github.com/curl/curl/pull/11024 Closes https://github.com/curl/curl/pull/11026 Daniel Stenberg (26 Apr 2023) - docs: clarify that more backends have HTTPS proxy support Closes #11033 - KNOWN_BUGS: remove two not-bugs - 11.7 signal-based resolver timeouts Not considered a bug anymore but just implementation details. People should avoid using timeouts with the synchronous name resolver. - 11.16 libcurl uses renames instead of locking for atomic operations Not a bug, just a description of how it works Closes #11032 Harry Sintonen (26 Apr 2023) - hostip: add locks around use of global buffer for alarm() When building with the sync name resolver and timeout ability we now require thread-safety to be present to enable it. Closes #11030 Daniel Stenberg (26 Apr 2023) - curl_path: bring back support for SFTP path ending in /~ libcurl used to do a directory listing for this case (even though the documentation says a URL needs to end in a slash for this), but 4e2b52b5f7a3 modified the behavior. This change brings back a directory listing for SFTP paths that are specified exactly as /~ in the URL. Reported-by: Pavel Mayorov Fixes #11001 Closes #11023 Emanuele Torre (26 Apr 2023) - docs/libcurl/curl_*escape.3: rename "url" argument to "input"/"string" Also reword the DESCRIPTION section to mention "input"/"string" argument in bold. Closes #11027 - docs/libcurl: minor cleanups I was reading curl_unescape(3) and I noticed that there was an extra space after the open parenthesis in the SYNOPSIS; I removed the extra space. I also ran a few grep -r commands to find and remove extra spaces after '(' in other files, and to find and replace uses of `T*' instead of `T *'. Some of the instances of `T*` where unnecessary casts that I removed. I also fixed a comment that was misaligned in CURLMOPT_SOCKETFUNCTION.3. And I fixed some formatting inconsistencies: in curl_unescape(3), all function parameter were mentioned with bold text except length, that was mentioned as 'length'; and, in curl_easy_unescape(3), all parameters were mentioned in bold text except url that was italicised. Now they are all mentioned in bold. Documentation is not very consistent in how function parameter are formatted: many pages italicise them, and others display them in bold text; but I think it makes sense to at least be consistent with formatting within the same page. Closes #11027 Daniel Stenberg (26 Apr 2023) - man pages: simplify the .TH sections - remove the version numbers - simplify the texts The date and version number will be put there for releases when maketgz runs the updatemanpages.pl script. Closes #11029 - hostcheck: fix host name wildcard checking The leftmost "label" of the host name can now only match against single '*'. Like the browsers have worked for a long time. - extended unit test 1397 for this - move some SOURCE variables from unit/Makefile.am to unit/Makefile.inc Reported-by: Hiroki Kurosawa Closes #11018 Dan Fandrich (25 Apr 2023) - smbserver: remove temporary files before exit Each execution of test 1451 would leave a file in /tmp before. Since Windows can't delete a file while it's open, all the temporary file names are stored and deleted on exit. Closes #10990 Stefan Eissing (25 Apr 2023) - Websocket en-/decoding - state is fully kept at connection, since curl_ws_send() and curl_ws_rec() have lifetime beyond usual transfers - no more limit on frame sizes Reported-by: simplerobot on github Fixes #10962 Closes #10999 Patrick Monnerat (25 Apr 2023) - urldata: copy CURLOPT_AWS_SIGV4 value on handle duplication Prior to this change STRING_AWS_SIGV4 (CURLOPT_AWS_SIGV4) was wrongly marked as binary data that could not be duplicated. Without this fix, this option's value is not copied upon calling curl_easy_duphandle(). Closes https://github.com/curl/curl/pull/11021 Stefan Eissing (25 Apr 2023) - http3: expire unpaused transfers in all HTTP/3 backends Closes #11005 - http2: always EXPIRE_RUN_NOW unpaused http/2 transfers - just increasing the http/2 flow window does not necessarily make a server send new data. It may already have exhausted the window before Closes #11005 - http2: pass `stream` to http2_handle_stream_close to avoid NULL checks Closes #11005 - h2/h3: replace `state.drain` counter with `state.dselect_bits` - `drain` was used by http/2 and http/3 implementations to indicate that the transfer requires send/recv independant from its socket poll state. Intended as a counter, it was used as bool flag only. - a similar mechanism exists on `connectdata->cselect_bits` where specific protocols can indicate something similar, only for the whole connection. - `cselect_bits` are cleard in transfer.c on use and, importantly, also set when the transfer loop expended its `maxloops` tries. `drain` was not cleared by transfer and the http2/3 implementations had to take care of that. - `dselect_bits` is cleared *and* set by the transfer loop. http2/3 does no longer clear it, only set when new events happen. This change unifies the handling of socket poll overrides, extending `cselect_bits` by a easy handle specific value and a common treatment in transfers. Closes #11005 Daniel Stenberg (25 Apr 2023) - socketpair: verify with a random value ... instead of using the curl time struct, since it would use a few uninitialized bytes and the sanitizers would complain. This is a neater approach I think. Reported-by: Boris Kuschel Fixes #10993 Closes #11015 Stefan Eissing (25 Apr 2023) - HTTP3: document the ngtcp2/nghttp3 versions to use for building curl - refs #11011 to clarify this for people building curl themselves Closes #11019 Daniel Stenberg (25 Apr 2023) - lib: unify the upload/method handling By making sure we set state.upload based on the set.method value and not independently as set.upload, we reduce confusion and mixup risks, both internally and externally. Closes #11017 - RELEASE-NOTES: synced Dan Fandrich (24 Apr 2023) - CI: don't run CI jobs if only another CI was changed A few paths were missed in the last commit, as well as a job added since then. Followup-to 395b9175 - CI: adjust labeler match patterns - runtests: support buffering log messages in runner & servers Log messages generated with logmsg can now be buffered and returned from the runner as a return value. This will be needed with parallel testing to allow all messages for one test to be displayed together instead of interspersed with messages of multiple tests. Buffering can be disabled by setting a logging callback function with setlogfunc, which is currently being done to preserve existing logging behaviour for now. Some additional output is generated in verbose and debugprotocol modes, which don't always use logmsg. These modes also impact some servers which generate extra messages. No attempt is made to buffer everything if these modes are enabled. Ref: #10818 Closes #11016 - runtests: more consistently use logmsg in server control code Also, display an error when sshversioninfo returns one. Ref: #10818 - runtests: create runner functions for clearlocks and stopservers runtests.pl now uses runner for all server actions beyond the initial variable configuration. Ref: #10818 - runtests: tightened servers package exports The defaults are intended for runtests.pl, whereas runner.pm needs to explicitly specify them. - runtests: display logs on server failure in singletest() This is closer to the place where logs are displayed on test failure. Also, only display these logs if -p is given, which is the same flag that controls display of test failure logs. Some server log files need to be deleted later so that they stay around long enough to be displayed on failure. Ref: #10818 - runtests: turn a print into a logmsg Also enable another couple of useful messages in verbose mode. Ref: #10818 Daniel Stenberg (24 Apr 2023) - http: store the password in the correct variable Typo from fc2f1e547a4a, detected by Coverity (because there's dead code due to this). Closes #11002 Stefan Eissing (24 Apr 2023) - HTTP3/quiche: terminate h1 response header when no body is sent - fixes a failure in test2501 where a response without body was missing the final empty line Closes #11003 Dan Fandrich (22 Apr 2023) - runtests: move showdiff into runtests.pl It's not used anywhere else. - devtest: add a new script for testing the test harness This is currently useful for starting a test server on its own without an associated test, which can be used for interactive curl testing or for validating parts of the test harness itself. More commands can be added to perform additional functions in the future. Ref: #10818 Closes #11008 - runtests: refactor the main test loop into two The test loop now has an initial loop that first runs through all possible tests to build a set of those to attempt on this run based on features and keywords and only then goes through that new list to run them. This actually makes it three loops through all tests cases, as there is an existing loop that gathers possible test numbers from the test files on disk. This has two minor effects on the output: all the tests that will be skipped are displayed at the start (instead of being interspersed with other tests) and the -l option no longer shows a count of tests at the end or a (misleading) statement that tests have run successfully. The skipped tests are also omitted from the test results sent to AppVeyor and Azure in CI builds. Another effect is a reduction in the amount of work considered part of the "Test definition reading and preparation time" reported with -r making those figures slightly lower than before. Ref: #10818 - runtests: track only the current test timings in runner.pm This avoids passing these data through through global variables, which soon won't be possible. Ref: #10818 - runtests: skip test preprocessing when doing -l This speeds up the output tremendously by avoiding unnecessary work. - runtests: simplify value returned regarding use of valgrind As a side effect this will now also show in verbose mode that valgrind is being skipped on tests that explicitly disable it, such as 600. Ref: #10818 - runtests: fix quoting in Appveyor and Azure test integration Test 1442's name was not quoted correctly so wasn't registered in Appveyor and it had the wrong name in Azure. The JSON string quotes were also invalid, even though both servers happened to accept it regardless. Closes #11010 Daniel Stenberg (19 Apr 2023) - RELEASE-NOTES: synced Dan Fandrich (18 Apr 2023) - runtests: spread out the port numbers used by servers The server ports are chosen randomly for each server, but the random ranges chosen were inconsistently-sized and overlapping. Now, they are spread out more so at least the first random port chosen for each server is guaranteed to not also be chosen by another server. The starting port numbers are also raised to put them in the Ephemeral Port range—not the range defined by RFC 6335 but the one used by Linux, which starts lower and gives us more room to work with. Reported-by: Daniel Stenberg - runtests: fix problems on <killserver> failure The verify time must be set in this case, like all cases. An error message needs to be displayed as well. - runtests: fix perl warning when <tool> is wrong - runtests: don't try to stop stunnel before trying again Calling stopserver() before retrying stunnel due to an error would stop the dependent server (such as HTTP) meaning stunnel would have nothing to talk to when it came up. Don't try to force a stop when it didn't actually start. Also, don't mark the server as bad for future use when it starts up on a retry. Reported-by: eaglegai at github Tested-by: eaglegai at github Fixes #10976 - runtests: don't accidentally randomly choose the same port If a server couldn't be started on a port, a new one is randomly chosen and the server is tried again. Avoid accidentally using a randomly-chosen 0 port offset by adding 1 to the random number. Found-by: Daniel Stenberg - runtests: don't attempt to use a port we know is in use This reduces the startup time when there is a known conflict on the random port chosen for a server. This was already done for stunnel, but now it's done for all servers. - http-server: fix server name in a log message This changed when the file was renamed in commit cbf57176 - runtests: refactor into more packages testutil.pm now contains a few miscellaneous functions that are used in several places but have no better place to live. subvariables moves to servers.pm since most variables that it substitutes relate to servers, so this is the most appropriate place. Rename a few functions for better naming consistency. Ref: #10818 Closes #10995 - runtests: call timestampskippedevents() in singletest ..rather than by the runner - runtests: assume a newer Valgrind by default The tests for an older Valgrind version should probably just be deleted, given that they're testing for an 18-year-old version. - runtests: refactor test runner code into runner.pm This is code that is directly responsible for running a single test. This will eventually run in a separate process as part of the parallel testing project. Ref: #10818 - runtests: skip unneeded work if test won't be running This speeds up tests by avoiding unnecessary processing. Ref: #10818 - runtests: factor out singletest_postcheck This will eventually need to be part of the test runner. Ref: #10818 - test303: kill server after test Otherwise, an HTTP test closely following this one with a tight time constraint (e.g. 672) could fail because the test server stays sitting with the wait command for a while. Patrick Monnerat (18 Apr 2023) - OS400: provide ILE/RPG usage examples Closes https://github.com/curl/curl/pull/10994 - OS400: improve vararg emulation - Use V7R4 RPG procedure overloading to improve vararg emulation. From OS400 V7R4 and above, ILE/RPG implements a limited procedure overloading feature that can be used to improve curl's typed implementation of varargs procedures. This commit applies it to curl_easy_setopt(), curl_multi_setopt(), curl_share_setopt() and curl_easy_getinfo(). Closes https://github.com/curl/curl/pull/10994 - OS400: fix and complete ILE/RPG binding - Fix wrong definitions of CURL_ZERO_TERNINATED, curl_mime_data() and curl_mime_data_ccsid(). - Add recent definitions, in particular blob, header API and WebSockets API. - Support for CURLVERSION_ELEVENTH. - New functions for EBCDIC support. Reflect these changes in README.OS400. Closes https://github.com/curl/curl/pull/10994 - OS400: implement EBCDIC support for recent features - Support CURLVERSION_ELEVENTH. - New function curl_url_strerror_ccsid(). - curl_easy_setopt_ccsid() supports blobs and 3 recent string options. - New function curl_easy_header_ccsid(). - New generic latin1<-->ccsid conversion functions curl_from_ccsid() and curl_to_ccsid() for user convenience. - README.OS400 updated accordingly. - Removed a leftover QsoSSL support identifier. Closes https://github.com/curl/curl/pull/10994 - OS400: rework build scripts - Rename shell function "system" to "CLcommand" to avoid confusion with built-in command. - Reformat scripts. Fix some indentations. Avoid lines > 80 characters where possible. - Support ASCII runtime development files in a user-defined directory path. - FIX SONAME detection. - Drop form API test program compilation (does not exist anymore). Closes https://github.com/curl/curl/pull/10994 Sevan Janiyan (18 Apr 2023) - tests/sshserver.pl: Define AddressFamily earlier As the comment states "Address family must be specified before ListenAddress" , otherwise the tests fail to run `"failed starting SSH server" 52 times (582, 583, 600, 601, 602, 603, 604, 60 5, 606 and 43 more)` Closes #10983 Stefan Eissing (18 Apr 2023) - quiche: Enable IDLE egress handling Follow-up to 544abeea which added the handling but wrongly left it commented out. Closes https://github.com/curl/curl/pull/11000 Daniel Stenberg (18 Apr 2023) - docs/examples/protofeats.c: Outputs all protocols and features Showing off one way to get to char pointer arrays of info returned by curl_version_info() Closes #10991 - tests/keywords.pl: remove This script does not work since the introduction of the test preprocessing. If we need this functionality, it probably needs to be moved into the runtests tool or similar. Reported-by: Dan Fandrich Fixes #10895 Closes #10987 Stefan Eissing (17 Apr 2023) - http2: support HTTP/2 to forward proxies, non-tunneling - with `--proxy-http2` allow h2 ALPN negotiation to forward proxies - applies to http: requests against a https: proxy only, as https: requests will auto-tunnel - adding a HTTP/1 request parser in http1.c - removed h2h3.c - using new request parser in nghttp2 and all h3 backends - adding test 2603 for request parser - adding h2 proxy test cases to test_10_* scorecard.py: request scoring accidentally always run curl with '-v'. Removed that, expect double numbers. labeller: added http1.* and h2-proxy sources to detection Closes #10967 Daniel Stenberg (17 Apr 2023) - curl_easy_unescape.3: rename the argument and highlight it appropriately in the text. Closes #10979 Viktor Szakats (17 Apr 2023) - autotools: sync up clang picky warnings with cmake Bringing missing options over from CMake. Move around existing `-Wno-pointer-bool-conversion` option to come _after_ `-Wconversion`. Reviewed-by: Marcel Raad Closes #10974 Daniel Stenberg (17 Apr 2023) - tests/libtest/lib1900.c: remove This file was left behind when the rest of the test was previously removed. Follow-up to e50a877df74f - src/tool_operhlp.c: fix value stored to 'uerr' is never read Ref: https://github.com/curl/curl/pull/10974#issuecomment-1510461343 Reported-by: Viktor Szakats Closes #10982 Viktor Szakats (16 Apr 2023) - cmake: speed up and extend picky clang/gcc options Extend existing picky compiler options with ones missing compared to autotools builds. Also sync options between clang and gcc. Redesign the way we enable these options to avoid the slow option detection almost completely. This reduces the number of detections from 35 to zero for clang and 3 for gcc, even after adding a bunch of new options. clang 3.0 (2011-11-29) and gcc 2.95 (1999-07-31) now required. Also show enabled picky options. Ref: https://github.com/libssh2/libssh2/pull/952 Reviewed-by: Daniel Stenberg Closes #10973 Andreas Falkenhahn (16 Apr 2023) - nbtlm: use semicolons instead of commas for (void) args Closes #10978 Daniel Stenberg (15 Apr 2023) - multi: free up more data earleier in DONE Before checking for more users of the connection and possibly bailing out. Fixes #10971 Reported-by: Paweł Wegner Closes #10972 - RELEASE-NOTES: synced - curl: do NOT append file name to path for upload when there's a query Added test 425 to verify. Reported-by: Dirk Rosenkranz Bug: https://curl.se/mail/archive-2023-04/0008.html Closes #10969 - libcurl-thread.3: improved name resolver wording And make better .SH sections Closes #10966 Colman Mbuya (14 Apr 2023) - CURLOPT_PROXY_SSL_VERIFYPEER.3: fix minor grammar mistake Closes #10968 Daniel Stenberg (14 Apr 2023) - curl: add --proxy-http2 For trying HTTP/2 with an HTTPS proxy. Closes #10926 - KNOWN_BUGS: remove fixed or outdated issues, move non-bugs - remove h3 issues believed to be fixed - make the flaky CI issue be generic and not Windows specific - "TLS session cache does not work with TFO" now documented This is now a documented restriction and not a bug. TFO in general is rarely used and has other problems, making it a low-priotity thing to work on. - remove "Renegotiate from server may cause hang for OpenSSL backend" This is an OpenSSL issue, not a curl one. Even if it taints curl. - rm "make distclean loops forever" - rm "configure finding libs in wrong directory" Added a section to docs/INSTALL.md about it. - "A shared connection cache is not thread-safe" Moved over to TODO and expanded for other sharing improvements we could do - rm "CURLOPT_OPENSOCKETPAIRFUNCTION is missing" - rm "Blocking socket operations in non-blocking API" Already listed as a TODO - rm "curl compiled on OSX 10.13 failed to run on OSX 10.10" Water under the bridge. No one cares about this anymore. - rm "build on Linux links libcurl to libdl" Verified to not be true (anymore). - rm "libpsl is not supported" The cmake build supports it since cafb356e19cda22 Closes #10963 - url: fix PVS nits - expression 'hostptr' is always true - a part of conditional expression is always true: proxypasswd - expression 'proxyuser' is always true - avoid multiple Curl_now() calls in allocate_conn Ref: #10929 Closes #10959 - bufq: simplify since expression is always true The check for 'len' is already done so it will remain true until updated. Pointed out by PVS. Ref: #10929 Closes #10958 - hash: fix assigning same value Pointed out by PVS Ref: #10929 Closes #10956 - cookie: address PVS nits - avoid assigning the same value again - remove superfluous check of co->domain - reduce variable scope for namep/valuep Ref: #10929 Closes #10954 Stefan Eissing (14 Apr 2023) - cf-socket: Disable socket receive buffer by default - Disable socket receive buffer unless USE_RECV_BEFORE_SEND_WORKAROUND is in place. While we would like to use the receive buffer, we have stalls in parallel transfers where not all buffered data is consumed and no socket events happen. Note USE_RECV_BEFORE_SEND_WORKAROUND is a Windows sockets workaround that has been disabled by default since b4b6e4f1, due to other bugs. Closes https://github.com/curl/curl/pull/10961 - cf-h2-proxy: fix processing ingress to stop too early - progress ingress stopped too early, causing data from the underlying filters to not be processed and report that no tunnel data was available - this lead to "hangers" where no socket activity was seen but data rested in buffers Closes #10952 - http3: check stream_ctx more thoroughly in all backends - callbacks and filter methods might be invoked at unexpected times, e.g. when the transfer's stream_ctx has not been initialized yet or, more likely, has already been taken down. - check for existance of stream_ctx in such places and return an error or silently succeed the call. Closes #10951 Daniel Stenberg (13 Apr 2023) - ftp: fix 'portsock' variable was assigned the same value Pointed out by PVS Ref: #10929 Closes #10955 - ftp: remove dead code This condition can never be true here since it is handled already 28 lines above. Pointed out by PVS. Ref: #10929 Closes #10957 - cf-h1-proxy: skip an extra NULL assign and use Curl_safefree() once to save another NULL assign. Found by PVS. Ref. #10929 Closes #10953 Philip Heiduck (13 Apr 2023) - GHA: suppress git clone output Follow-up: https://github.com/curl/curl/commit/8203aa6ed405ec832d2c62f18dfda2 93f89a23f9 Closes #10949 Stefan Eissing (13 Apr 2023) - cf-socket: remove dead code discovered by PVS Closes #10960 Daniel Stenberg (13 Apr 2023) - http: skip a double NULL assign and also use a local variable to shorten the long names and increase readability in the function. Pointed out by PVS. Ref: #10929 Closes #10950 - mime: skip NULL assigns after Curl_safefree() Pointed out by PVS. Ref: #10929 Closes #10947 - rtsp: skip NULL assigns after Curl_safefree() ... since this is a macro that assigns NULL itself. Pointed out by PVS. Ref: #10929 Closes #10946 - smb: remove double assign The same value is assigned the same value already a few lines above. Pointed out by PVS. Ref: #10929 Closes #10945 - transfer: skip extra assign The 'result' variable already contains CURLE_OK at this point, no use in setting it again. Pointed out by PVS. Ref: #10929 Closes #10944 - urlapi: skip a pointless assign It stores a null byte after already having confirmed there is a null byte there. Detected by PVS. Ref: #10929 Closes #10943 Philip Heiduck (13 Apr 2023) - GHA: suppress git clone output Closes #10939 Stefan Eissing (13 Apr 2023) - tests: make test_12_01 a bit more forgiving on connection counts - cf-socket: add socket recv buffering for most tcp cases - use bufq as recv buffer, also for Windows pre-receive handling - catch small reads followed by larger ones in a single socket call. A common pattern on TLS connections. Closes #10787 Daniel Stenberg (13 Apr 2023) - urlapi: cleanups - move host checks together - simplify the scheme parser loop and the end of host name parser - avoid itermediate buffer storing in multiple places - reduce scope for several variables - skip the Curl_dyn_tail() call for speed - detect IPv6 earlier and skip extra checks for such hosts - normalize directly in dynbuf instead of itermediate buffer - split out the IPv6 parser into its own funciton - call the IPv6 parser directly for ipv6 addresses - remove (unused) special treatment of % in host names - junkscan() once in the beginning instead of scattered - make junkscan return error code - remove unused query management from dedotdotify() - make Curl_parse_login_details use memchr - more use of memchr() instead of strchr() and less strlen() calls - make junkscan check and return the URL length An optimized build runs one of my benchmark URL parsing programs ~41% faster using this branch. (compared against the shipped 7.88.1 library in Debian) Closes #10935 Josh McCullough (13 Apr 2023) - http2: fix typo in infof() call Closes #10940 Daniel Stenberg (12 Apr 2023) - noproxy: pointer to local array 'hostip' is stored outside scope Ref: #10929 Closes #10933 Stefan Eissing (12 Apr 2023) - connect: fix https connection setup to treat ssl_mode correctly - for HTTPS protocol, a disabled ssl should never be acceptables. Closes #10934 Douglas R. Reno (12 Apr 2023) - CMakeLists.txt: fix typo for Haiku detection Closes #10937 Dan Fandrich (11 Apr 2023) - pathhelp: use the cached $use_cygpath when available - runtests: eliminate unneeded variable - runtests: make the # of server start attempts a constant - runtests: on startup failure call displaylogs only in serverfortest This reduces the number of calls spread throughout the code. Ref: #10818 Closes #10919 - runtests: return an error code with startservers() The code indicates the kind of failure encountered in starting a server, which can be used by the caller to tailor the user experience. Ref: #10818 - runtests: abort early if runpingpongserver is given a bad server type - runtests: don't use the SMB server verification time as reference %FTPTIME2 and %FTPTIME3 should be set by the FTP server only, for consistency. - tests: factor out the test server management code This now lives in servers.pm with some configuration variables moved to globalconfig.pm Ref: #10818 - runtests: remove an inappropriate use of runclientoutput This function is intended for running client code, not servers. - runtests: only add $LIBDIR to the path for checktestcmd Since checkcmd is for finding servers, there will never be anything in this directory of interest to them. Ref: #10818 - tests: log sshserver.pl messages to a file The logmsg messages were thrown away before, so they are now available for debugging. - runtests: also show DISABLED tests with -l Other reasons for skipping tests are ignored for -l, so being explicitly disabled should be too. - runtests: move the UNIX sockets into $PIDDIR These were missed when the other server files were moved there. Follow-up to 70d2fca2 Ref: #10818 - tests: tighten up perl exports This reduces namespace pollution a little. Ref: #10818 - tests: turn perl modules into full packages This helps enforce more modularization and encapsulation. Enable and fix warnings on a few packages. Also, rename ftp.pm to processhelp.pm since there's really nothing ftp-specific in it. Ref: #10818 Daniel Stenberg (11 Apr 2023) - multi: remove a few superfluous assigns PVS found these "The 'rc' variable was assigned the same value." cases. Ref: #10929 Closes #10932 - schannel: add clarifying comment Explaining how the PVS warning in #10929 is wrong: Dereferencing of the null pointer 'backend->cred' might take place. Closes #10931 - cookie: clarify that init with data set to NULL reads no file ... and make Curl_cookie_add() require 'data' being set proper with an assert. The function has not worked with a NULL data for quite some time so this just corrects the code and comment. This is a different take than the proposed fixed in #10927 Reported-by: Kvarec Lezki Ref: #10929 Closes #10930 Kvarec Lezki (11 Apr 2023) - vtls: remove int typecast for sizeof() V220 Suspicious sequence of types castings: memsize -> 32-bit integer -> memsize. The value being cast: 'sizeof (buf->data)'. curl\lib\vtls\vtls.c 2025 https://pvs-studio.com/en/docs/warnings/v220/ Closes #10928 Stefan Eissing (11 Apr 2023) - http2: fix copynpaste error reported by coverity - move all code handling HTTP/2 frames for a particular stream into a separate function to keep from confusing the call `data` with the stream `data`. Closes #10924 Dan Fandrich (11 Apr 2023) - tests: log a too-long Unix socket path in sws and socksd Ref: #10919 Daniel Stenberg (11 Apr 2023) - gen.pl: error on duplicated See-Also fields Updated http2.d accordingly. Closes #10925 - http2: avoid possible null pointer dereference Reported-by: Dan Fandrich Fixes #10920 Closes #10923 - lib1560: verify that more bad host names are rejected when setting the hostname component of a URL Closes #10922 - curl_url_set.3: mention that users can set content rather freely ... which then might render bad URLs if you extract a URL later. Closes #10921 Dan Fandrich (10 Apr 2023) - CI: retry failed downloads of aws-lc Don't fail the build in case of a temporary server problem. - test1169: fix so it works properly everywhere - Use an absolute path for the -L option since the module isn't in the perl path - Create the needed test file in a <file> section; <precheck> isn't intended for this - Fix the test number in the file name, which was wrong Follow-up to f754990a Ref: #10818 Fixes #10889 Closes #10917 - tests: stop using strndup(), which isn't portable It's not available on Solaris 10, for example. Since this is just test code that doesn't need to use an optimized system version, replace it with the implementation copied from tool_cb_hdr.c. - runtests: fix an incorrect comment about the ld_preload feature Follow-up to 1f631864 Ref: #10818 Daniel Stenberg (9 Apr 2023) - urlapi: prevent setting invalid schemes with *url_set() A typical mistake would be to try to set "https://" - including the separator - this is now rejected as that would then lead to url_get(... URL...) would get an invalid URL extracted. Extended test 1560 to verify. Closes #10911 Biswapriyo Nath (9 Apr 2023) - http2: remove unused Curl_http2_strerror function declaration Curl_http2_strerror was renamed to http2_strerror in 05b100aee247bb9bec8e9a1b0 and then http2_strerror was removed in 5808a0d0f5ea0399d4a2a2 This also fixes the following compiler error lib/http2.h:41:33: error: unknown type name 'uint32_t' lib/http2.h:1:1: note: 'uint32_t' is defined in header '<stdint.h>' Closes #10912 Daniel Stenberg (8 Apr 2023) - RELEASE-NOTES: synced SuperIlu on github (8 Apr 2023) - config-dos.h: fix SIZEOF_CURL_OFF_T for MS-DOS/DJGPP Fixes #10905 Closes #10910 Daniel Stenberg (8 Apr 2023) - lib: remove CURLX_NO_MEMORY_CALLBACKS The only user of this define was 'chkdecimalpoint' - a special purpose test tool that was built but not used anymore (since 17c18fbc3 - Apr 2020). Closes #10908 - CURLPROXY_HTTPS2: for HTTPS proxy that may speak HTTP/2 Setting this proxy type allows curl to negotiate and use HTTP/2 with HTTPS proxies. Closes #10900 Ali Khodkar (8 Apr 2023) - write-out.d: add missing periods Closes #10897 Daniel Stenberg (7 Apr 2023) - http2: remove check for !data after it was already dereferenced Pointed out by Coverity Closes #10906 - http_proxy: provide missing arg to infof() call Pointed out by Coverity Closes #10904 - content_encoding: only do tranfer-encoding compression if asked to To reduce surprises. Update test 387 and 418 accordingly. Closes #10899 - sws: comparison of unsigned expression < 0 is always false Follow-up to 356dd0b73a75ed6d5 Closes #10903 - lib/cmake: add HAVE_WRITABLE_ARGV check Assisted-by: Jakub Zakrzewski Closes #10896 - configure: don't set HAVE_WRITABLE_ARGV on Windows Ref: #10888 Closes #10896 - vtls: fix build error when proxy-disabled Closes #10901 Stefan Eissing (6 Apr 2023) - tests: increase sws timeout for more robust testing - for https CONNECT forwarding, this was fixed at 5 seconds which led to spurious CI test failures - add --keepalive parameter to sws to control this - let httpserver use 30 seconds Closes #10898 - http2: move HTTP/2 stream vars into local context - remove NGHTTP2 members of `struct HTTP` - add `void *h2_ctx` to `struct HTTP` - add `void *h3_ctx` to `struct HTTP` - separate h2/h3 pointers are needed for eyeballing - manage local stream_ctx in http implementations Closes #10877 - proxy: http2 proxy tunnel implementation - currently only on debug build and when env variable CURL_PROXY_TUNNEL_H2 is present. - will ALPN negotiate with the proxy server and switch tunnel filter based on the protocol negotiated. - http/1.1 tunnel code moved into cf-h1-proxy.[ch] - http/2 tunnel code implemented in cf-h2-proxy.[ch] - tunnel start and ALPN set remains in http_proxy.c - moving all haproxy related code into cf-haproxy.[ch] VTLS changes - SSL filters rely solely on the "alpn" specification they are created with and no longer check conn->bits.tls_enable_alpn. - checks on which ALPN specification to use (or none at all) are done in vtls.c when creating the filter. Testing - added a nghttpx forward proxy to the pytest setup that speaks HTTP/2 and forwards all requests to the Apache httpd forward proxy server. - extending test coverage in test_10 cases - adding proxy tests for direct/tunnel h1/h2 use of basic auth. - adding test for http/1.1 and h2 proxy tunneling to pytest Closes #10780 - vtls and h2 improvements - eliminate receive loop in vtls to fill buffer. This may lead to partial reads of data which is counter productive - let http2 instead loop smarter to process pending network data without transfer switches scorecard improvements - do not start caddy when only httpd is requested - allow curl -v to stderr file on --curl-verbose Closes #10891 Daniel Stenberg (6 Apr 2023) - tests: 1078 1288 1297 use valid IPv4 addresses With the enhanced URL parser, these tests failed because of their bad IPv4 use. - urlapi: detect and error on illegal IPv4 addresses Using bad numbers in an IPv4 numerical address now returns CURLUE_BAD_HOSTNAME. I noticed while working on trurl and it was originally reported here: https://github.com/curl/trurl/issues/78 Updated test 1560 accordingly. Closes #10894 - RELEASE-NOTES: synced - urlapi: URL encoding for the URL missed the fragment Meaning that it would wrongly still store the fragment using spaces instead of %20 if allowing space while also asking for URL encoding. Discovered when playing with trurl. Added test to lib1560 to verify the fix. Closes #10887 - rtsp: convert mallocs to dynbuf for RTP buffering Closes #10786 - tool_writeout: add URL component variables Output specific components from the used URL. The following variables are added for this purpose: url.scheme, url.user, url.password, url.options, url.host, url.port, url.path, url.query, url.fragment, url.zoneid Add the following for outputting parts of the "effective URL": urle.scheme, urle.user, urle.password, urle.options, urle.host, urle.port, urle.path, urle.query, urle.fragment, urle.zoneid Added test 423 and 424 to verify. Closes #10853 Stefan Eissing (4 Apr 2023) - tests/http: improved httpd detection - better error messages when not found/complete - handling of `--without-test-httpd` Reported-by: kwind on github Fixes #10879 Closes #10883 Daniel Stenberg (4 Apr 2023) - configure: make quiche require quiche_conn_send_ack_eliciting curl now requires quiche version >= 1.17.1 to be used and this function was added in this version and makes a convenient check. This requirement is because this is the lowest quiche version that supports peer-initiated key updates correctly. Closes #10886 Dan Fandrich (1 Apr 2023) - unit tests: use the unit test infrastructure better Allow UNITTEST_STOP to return the error code, use the fail & abort macros to indicate test failure and return success instead of fail if the unit test can't test anything because of missing features at compile-time. A couple of tests could never fail because they were overriding the failure return code. - runtests: strip EOL on precheck output on Windows, too Precheck failures would show on two lines in the test summary output otherwise. - tests: move server config files under the pid dir These files are generated by the test servers and must therefore be found in the log directory to make them available to only those servers once multiple test runners are executing in parallel. They must also not be deleted with the log files, so they are stored in the pidfile directory. Ref: #10818 Closes #10875 - runtests: use the ssh key filenames from the sshhelp package - tests: move pidfiles and portfiles under the log directory This is to segregate all files written by a test process into a single root to allow for future parallel testing. Ref: #10818 Closes #10874 - runtests: minor code cleanups - runtests: call processexists() and pidfromfile() rather than duplicating the logic in several places. Viktor Szakats (31 Mar 2023) - cmake: do not add zlib headers for openssl Logic copied earlier from wolfSSL. wolfSSL requires zlib headers for its public headers. OpenSSL does not, so stop adding zlib headers for it. Follow-up to 1e3319a167d2f32d295603167486e9e88af9bb4e Closes #10878 Stefan Eissing (31 Mar 2023) - rustls: fix error in recv handling - when rustls is told to recieve more TLS data and its internal plaintext buffers are full, it returns an IOERROR - avoid receiving TLS data while plaintext is not read empty pytest: - increase curl run timeout when invoking pytest with higher verbosity Closes #10876 - http3: improvements across backends - ngtcp2: using bufq for recv stream data - internal stream_ctx instead of `struct HTTP` members for quiche, ngtcp2 and msh3 - no more QUIC related members in `struct HTTP` - experimental use of recvmmsg(), disabled by default - testing on my old debian box shows no throughput improvements. - leaving it in, but disabled, for future revisit - vquic: common UDP receive code for ngtcp2 and quiche - vquic: common UDP send code for ngtcp2 and quiche - added pytest skips for known msh3 failures - fix unit2601 to survive torture testing - quiche: using latest `master` from quiche and enabling large download tests, now that key change is supported - fixing test_07_21 where retry handling of starting a stream was faulty - msh3: use bufq for recv buffering headers and data - msh3: replace fprintf debug logging with LOG_CF where possible - msh3: force QUIC expire timers on recv/send to have more than 1 request per second served Closes #10772 Dan Fandrich (30 Mar 2023) - test1471/2: add http as a required feature curl bails out early with a different error message if http support is compiled out. Ref: #10705 - tests: limit return code of unit tests and lib tests Values greater than 125 have special meanings, so cap it there. Unit tests and lib tests use the number of failures as the return code, so a large number of failures (such as test 2601 as a torture test) can exceed this causing the test to be erroneously reported as having failed. Ref: #10720 - test1960: point to the correct path for the precheck tool Otherwise, it might find the binary in .libs which can cause it to use the system libcurl which can fail. This error is only visible by noticing that the test is skipped. Follow-up to e4dfe6fc Ref: #10651 - tests: use the proper %LOGDIR path on two tests Follow-up to e7a021e1 Ref: #10818 Daniel Stenberg (30 Mar 2023) - rtsp: fix Value stored to 'skip_size' is never read Pointed out by scan-build Follow-up to 6c6306f3008f2c9b20a64 Closes #10872 Stefan Eissing (30 Mar 2023) - tests/http: relax connection check in test_07_02 Only 1 connection will be used when curl is slow, happens when address-sanitized in CI, for example Closes #10865 - http2: flow control and buffer improvements - use bufq for send/receive of network data - usd bufq for send/receive of stream data - use HTTP/2 flow control with no-auto updates to control the amount of data we are buffering for a stream HTTP/2 stream window set to 128K after local tests, defined code constant for now - elminiating PAUSEing nghttp2 processing when receiving data since a stream can now take in all DATA nghttp2 forwards Improved scorecard and adjuste http2 stream window sizes - scorecard improved output formatting and options default - scorecard now also benchmarks small requests / second Closes #10771 Dan Fandrich (30 Mar 2023) - runtests: show error message if file can't be written - tests: fix remaining servers to run with a dynamic log directory This final commit in the series is sufficient to allow the tests succeed if $LOGDIR is changed in runtests.pl. Ref: #10818 Closes #10866 - tests: fix fake_ntlm to run with a dynamic log directory Ref: #10818 - tests: fix http servers to run with a dynamic log directory Ref: #10818 - tests: fix ftpserver to run with a dynamic log directory Ref: #10818 - tests: fix C servers to run with a dynamic log directory Ref: #10818 - tests: fix lib tests to run with a dynamic log directory Ref: #10818 - tests: fix unit tests to run with a dynamic log directory Ref: #10818 - tests: use %LOGDIR to refer to the log directory This will allow it be set dynamically. Ref: #10818 - runtests: track verification time even if no files to compare - getpart: better handle case of file not found - testcurl: bump version date It hadn't been updated in 9 years; it's time. - tests: switch to 3-argument open in test suite The perl 2-argument open has been considered not-quite-deprecated since the 3-argument form was introduced almost a quarter century ago. - tests: silence some Perl::Critic warnings in test suite Not all warnings are fixed; many are as much stylistic suggestions than anything and IMHO don't do much to actually improve the code. Ref: #10818 Closes #10861 - docs: bump the minimum perl version to 5.6 It's actually been this way since at least 2012 (when a 3-argument open was added to runtests.pl). Given the lack of complaints in the interim, it's safe to call this 23 year old perl version the minimum. - runtests: memoize the getpart* subroutines to speed up access The refactored code calls these functions with the same arguments more often, so this prevents redundant test case file parsing. Approved-by: Daniel Stenberg Ref: #10818 Closes #10833 - runtests: remove duplicated feature variables Use the feature map stored in the hash table instead. Most of the variables were only used only once, to set the value in the hash table. Ref: #10818 - runtests: also ignore test file problems when ignoring results This simplifies error handling in the test verification code and makes it more consistent. Ref: #10818 - runtests: more refactoring for clarity Ref: #10818 - runtests: don't start servers if -l is given - runtests: fix typos - runtests: refactor singletest() into separate functions This takes it from a 1200 line behemoth into something more manageable. The content and order of the functions is taken almost directly from singletest() so the diff sans whitespace is quite short. Ref: #10818 - runtests: refactor singletest() into distinct sections Namely: - Verify that this test case should be run - Start the servers needed to run this test case - Check that test environment is fine to run this test case - Prepare the test environment to run this test case - Run the test command - Clean up after test command - Verify test succeeded Ref: #10818 - runtests: stop copying a few arrays where not needed Unlike some other languages that just copy a pointer, perl copies the entire array contents which takes time for a large array. Ref: #10818 - runtests: reduce redundant calls to getpart/getpartattr These functions scan through the entire test file every time to find the right section, so they can be slow for large test files. Ref: #10818 - tests: document that the unittest keyword is special Also, add other features that were missing. Stefan Eissing (30 Mar 2023) - docs: add documentation for bufq Closes #10869 Daniel Stenberg (30 Mar 2023) - RELEASE-NOTES: synced Matt Jolly (30 Mar 2023) - hostip: refuse to resolve the .onion TLD RFC 7686 states that: > Applications that do not implement the Tor > protocol SHOULD generate an error upon the use of .onion and > SHOULD NOT perform a DNS lookup. Let's do that. https://www.rfc-editor.org/rfc/rfc7686#section-2 Add test 1471 and 1472 to verify Fixes #543 Closes #10705 Philip Heiduck (30 Mar 2023) - GHA: update ngtcp2-*.yml to v0.10.0 Closes #10612 Stefan Eissing (30 Mar 2023) - tests/http: fix log formatting on wrong exit code Closes #10868 Daniel Stenberg (30 Mar 2023) - spellcheck.words: unify the AWS-LC spelling Follow-up to 34ef4fab22d93 Closes #10867 Jim King (30 Mar 2023) - openssl: interop with AWS-LC * Configure changes to detect AWS-LC * CMakeLists.txt changes to detect AWS-LC * Compile-time branches needed to support AWS-LC * Correctly set OSSL_VERSION and report AWS-LC release number * GitHub Actions script to build with autoconf and cmake against AWS-LC AWS-LC is a BoringSSL/OpenSSL derivative For more information see https://github.com/awslabs/aws-lc/ Closes #10320 Viktor Szakats (30 Mar 2023) - cmake: picky-linker fixes for openssl, ZLIB, H3 and more - fix HTTP/3 support detection with OpenSSL/quictls built with ZLIB. (Requires curl be built with ZLIB option also.) - fix HTTP/3 support detection with OpenSSL/quictls/LibreSSL and `ld` linker on Windows. - fix HTTP/3 support detection with wolfSSL to automatically add `ws2_32` to the lib list on Windows. For all linkers. - reposition ZLIB (and other compression) detection _after_ TLS detection, but before calling HTTP/3-support detection via `CheckQuicSupportInOpenSSL`. May be a regression from ebef55a61df0094b9790710a42f63c48e7de3c13 May fix #10832 (Reported-by: Micah Snyder) This also seems to fix an odd case, where OpenSSL/quictls is correctly detected, but its header path is not set while compiling, breaking build at `src/curl_ntlm_core.c`. Reason for this remains undiscovered. - satisfy "picky" linkers such as `ld` with MinGW, that are highly sensitive to lib order, by also adding brotli to the beginning of the lib list. - satisfy "picky" linkers by adding certain Windows systems libs to the lib list for OpenSSL/LibreSSL. (Might need additional ones for other forks, such as `pthread` for BoringSSL.) Note: It'd make sense to _always_ add `ws2_32`, `crypt32` (except Windows App targets perhaps?), `bcrypt` (except old-mingw!) on Windows at this point. They are almost always required, and if some aren't, they are ignored by the linker with no effect on final binaries. Closes #10857 Stefan Eissing (30 Mar 2023) - vlts: use full buffer size when receiving data if possible SSL backends like OpenSSL/wolfSSL and other return the content of one TLS record on read, but usually there are more available. Change the vtls cfilter recv() function to fill the given buffer until a read would block. Closes #10736 dengjfzh on github (30 Mar 2023) - rtsp: skip malformed RTSP interleaved frame data Some IP cameras send malformed RTSP interleaved frames sometimes, which can cause curl_easy_perform return 1 (CURLE_UNSUPPORTED_PROTOCOL). This change attempts to skip clearly incorrect RTSP interleaving frame data. Closes #10808 Stefan Eissing (30 Mar 2023) - lib: add `bufq` and `dynhds` Adding `bufq`: - at init() time configured to hold up to `n` chunks of `m` bytes each. - various methods for reading from and writing to it. - `peek` support to get access to buffered data without copy - `pass` support to allow buffer flushing on write if it becomes full - use case: IO buffers for dynamic reads and writes that do not blow up - distinct from `dynbuf` in that: - it maintains a read position - writes on a full bufq return CURLE_AGAIN instead of nuking itself - Init options: - SOFT_LIMIT: allow writes into a full bufq - NO_SPARES: free empty chunks right away - a `bufc_pool` that can keep a number of spare chunks to be shared between different `bufq` instances Adding `dynhds`: - a straightforward list of name+value pairs as used for HTTP headers - headers can be appended dynamically - headers can be removed again - headers can be replaced - headers can be looked up - http/1.1 formatting into a `dynbuf` - configured at init() with limits on header counts and total string sizes - use case: pass a HTTP request or response around without being version specific - express a HTTP request without a curl easy handle (used in h2 proxy tunnels) - future extension possibilities: - conversions of `dynhds` to nghttp2/nghttp3 name+value arrays Closes #10720 - pytest: improvements for suitable curl and error output - will check built curl for http and https support and skip all tests if not there - will dump stdout/stderr/trace output on errored responses Closes #10829 Daniel Stenberg (29 Mar 2023) - lib: use correct printf flags for sockets and timediffs Introduces CURL_FORMAT_SOCKET_T for outputting socket numbers. Fixes #10737 Reported-by: Gisle Vanem Closes #10855 - telnet: make MSVC ignore warning for assignment within conditional Follow-up to d92a5007b60e0af7d Closes #10859 - ws: handle reads before EAGAIN better Reported-by: simplerobot on github Fixes #10831 Closes #10856 - test1592: add flaky keyword Closes #10860 Frank Gevaerts (28 Mar 2023) - lib/sha256.c: typo fix in comment (duplicated "is available") Closes #10851 Arne Soete (28 Mar 2023) - tests: update tests/httpd references to tests/http tests/httpd was renamed to tests/http in #10654. This patch updates some references in the README Closes #10854 Kamil Dudka (28 Mar 2023) - telnet: simplify the implementation of str_is_nonascii() There is no need to traverse the string twice. Closes #10852 Frank Gevaerts (28 Mar 2023) - curl_easy_getinfo.3: typo fix (duplicated "from the") Closes #10850 Philip Heiduck (28 Mar 2023) - wolfssl.yml: bump to version 5.6.0 Closes #10843 Daniel Stenberg (28 Mar 2023) - RELEASE-NOTES: synced Ronan Pigott (28 Mar 2023) - docs/cmdline-opts: document the dotless config path The real xdg config path is $XDG_CONFIG_HOME/curlrc, without the dot. The dotless name seems preferable, so let's match the documentation to the behavior. Closes #10849 Daniel Stenberg (28 Mar 2023) - HTTP-COOKIES.md: mention the #HttpOnly_ prefix Fixes #10847 Reported-by: Harry Sintonen Closes #10848 - dynbuf: never allocate larger than "toobig" As dynbufs always have a fixed maximum size which they are not allowed to grow larger than, making sure that it never allocates a larger buffer makes sure the buffer does not allocate memory that will never be used. Closes #10845 - ftplistparser: replace realloc with dynbuf Closes #10844 - ftplistparser: use ISDIGIT() Closes #10844 - ftplistparser: move out private data from public struct The public 'curl_fileinfo' struct contained three fields that are for internal purposes only. This change makes them unused in the public struct. The new private struct fields are also renamed to make this separation more obvious internally. Closes #10844 - openssl: fix indents - white space edits only Closes #10840 - url: remove call to Curl_llist_destroy in Curl_close A list that is created with a NULL "destructor" does not need to be destroyed. Not calling it is faster than calling it. Closes #10846 - multi: remove PENDING + MSGSENT handles from the main linked list As they are not driving transfers or any socket activity, the main loop does not need to iterate over these handles. A performance improvement. They are instead only held in their own separate lists. 'data->multi' is kept a pointer to the multi handle as long as the easy handle is actually part of it even when the handle is moved to the pending/msgsent lists. It needs to know which multi handle it belongs to, if for example curl_easy_cleanup() is called before the handle is removed from the multi handle. Alll 'data->multi' pointers of handles still part of the multi handle gets cleared by curl_multi_cleanup() which "orphans" all previously attached easy handles. This is take 2. The first version was reverted for the 8.0.1 release. Assisted-by: Stefan Eissing Closes #10801 Stefan Eissing (26 Mar 2023) - tests/http: add timeout to running curl in test cases - we had a CI case once where `curl` seemingly did not return and it was hard to guess what happened. - make curl execution in test cases time out after 60 seconds Closes #10783 Daniel Stenberg (26 Mar 2023) - RELEASE-PROCEDURE: update to new schedule Ref: https://curl.se/mail/lib-2023-03/0062.html Assisted-by: Andy Alt Assisted-by: Dan Frandrich Closes #10827 Patrick Monnerat (26 Mar 2023) - doc: curl_mime_init() strong easy handle binding has been relaxed in 7.87.0 Reported-by: Chloe Kudryavtsev Fixes #10834 Closes #10835 Jay Satiro (25 Mar 2023) - CURLOPT_WRITEFUNCTION.3: fix typo Reported-by: Osaila@users.noreply.github.com Fixes https://github.com/curl/curl/issues/10839 Dan Fandrich (24 Mar 2023) - CI: skip some more builds when possible When a commit only contains tests, documentation, or cmake files, skip those builds that aren't affected by those. The file filters available on the CI services don't seem to allow skipping individual jobs, only the entire workflow, so we can't get any more fine-grained than this. - CI: add and adjust labeler match patterns Allow cmdline tool alongside other labels. Kai Pastor (25 Mar 2023) - CMake: make config version 8 compatible with 7 Reviewed-by: Jakub Zakrzewski Closes #10819 Daniel Stenberg (24 Mar 2023) - RELEASE-NOTES: synced Bumped version-in-progress to 8.1.0 - GHA: add a memory-sanitizer job Closes #10815 Dan Fandrich (23 Mar 2023) - CI: fix brew retries on GHA The fix in the previous commit was complete for Cirrus but accidentally left off a part for GHA. Follow-up to c2b7249d - CI: skip Azure for more commits which change only GHA Daniel Stenberg (23 Mar 2023) - cmake: set SONAME for SunOS too Provided-by: Brian Lund Closes #10816 Stefan Eissing (23 Mar 2023) - ngtcp2: adjust config and code checks for ngtcp2 without nghttp3 - make configure show on HTTP3 feature that both ngtcp2 and nghttp3 are in play - define ENABLE_QUIC only when USE_NGTCP2 and USE_NGHTTP3 are defined - add USE_NGHTTP3 in the ngtcp2 implementation Fixes #10793 Closes #10821 Daniel Stenberg (23 Mar 2023) - data.d: emphasize no conversion When asking curl to send a POST, curl does not encode or change the data. Ref: #10820 Closes #10823 - server/getpart: clear the buffer before load Fixes msan warnings: ==54195==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55ece35e57cb in line_length /home/runner/work/curl/curl/tests/server /getpart.c:111:25 #1 0x55ece35e3b83 in readline /home/runner/work/curl/curl/tests/server/ge tpart.c:164:24 #2 0x55ece35e0269 in getpart /home/runner/work/curl/curl/tests/server/get part.c:347:18 #3 0x55ece36180b6 in parse_servercmd /home/runner/work/curl/curl/tests/se rver/sws.c:283:13 Closes #10822 - ntlm: clear lm and nt response buffers before use To avoid the risk of MemorySanitizer: use-of-uninitialized-value Closes #10814 - digest: clear target buffer Closes #10814 Douglas R. Reno (22 Mar 2023) - cmake: bring in the network library on Haiku. When cross-compiling for Haiku, the networking library needs to be brought in. Without this, an unknown type of "Error" is reported in lib/curl_setup_once.h. This is also needed when using CMake natively on Haiku to build libcurl. Fixes #10296 Closes #10792 Daniel Stenberg (22 Mar 2023) - runtests: die if curl version can be found Closes #10813 Stefan Eissing (22 Mar 2023) - multi: add handle asserts in DEBUG builds For GOOD_EASY_HANDLE and GOOD_MULTI_HANDLE checks - allow NULL pointers to "just" return an error as before - fail hard on nun-NULL pointers that no longer show the MAGICs Closes #10812 Jon Rumsey (22 Mar 2023) - gskit: various compile errors in OS400 Various compile failures in gskit.c; - pipe_ssloverssl() needs Curl_easy data parameter for Curl_conn_cf_get_socket(cf, data) - key_passwd is in ssl_config, not conn_config - close_on() has 2 parameters, not 4 - getsockopt() needs to call Curl_conn_cf_get_socket(), not cxn->sock[FIRSTSOCKET] Fixes #10799 Closes #10800 Daniel Stenberg (22 Mar 2023) - tool_operate: pass a long as CURLOPT_HEADEROPT argument Closes #10798 - GHA: run all linux test jobs with valgrind Closes #10798 - GHA-linux: add an address-sanitizer build Closes #10810 Version 8.0.1 (20 Mar 2023) Daniel Stenberg (20 Mar 2023) - RELEASE-NOTES: synced curl 8.0.1 - Revert "multi: remove PENDING + MSGSENT handles from the main linked list" This reverts commit f6d6f3ce01e377932f1ce7c24ee34d45a36950b8. The commits caused issues in the 8.0.0 release. Needs a retake. Reported-by: Kamil Dudka Closes #10795 - include/curl/curlver.h: bump to 8.0.1 Version 8.0.0 (20 Mar 2023) Daniel Stenberg (20 Mar 2023) - RELEASE-NOTES: synced The curl 8.0.0 release - THANKS: from the 8.0.0 release - scripts/delta: fix "ambiguous argument" when used in branches - SECURITY-PROCESS.md: Busy-loops are not security problems Closes #10790 Stefan Eissing (17 Mar 2023) - tests/http: do not save files for downloads in scorecard testing Closes #10788 Daniel Stenberg (17 Mar 2023) - cf-socket: use port 80 when resolving name for local bind It turns out c-ares returns an error when asked to resolve a host name with ares_getaddrinfo using port number 0. Reported as a c-ares bug here: https://github.com/c-ares/c-ares/issues/517 The work-around is to simply use port 80 instead, as the number typically doe s not make a difference and a non-zero number works for c-ares. Fixes #10759 Reported-by: Matt Jolly Closes #10789 - curl.h: require gcc 12.1 for the deprecation magic Reported-by: kchow-FTNT on github Fixes #10726 Closes #10784 - Revert "rtsp: use dynbuf instead of custom reallocs" This reverts commit 1b9ea3239d22147e00d8 because of OSS-fuzz reports. I'll do another take after the pending release. Closes #10785 - test422: verify --next used without a prior URL Closes #10782 - tool_getparam: error if --next is used without a prior URL Reported-by: 積丹尼 Dan Jacobson Ref: https://github.com/curl/curl/pull/10769#discussion_r1137895629 Closes #10782 - libssh: use dynbuf instead of realloc When building lines to show for SFTP directory listings. Closes #10778 - lib2305: deal with CURLE_AGAIN The test does a slightly ugly busy-loop for this case but should be managable due to it likely being a very short moment. Mention CURLE_AGAIN in curl_ws_recv.3 Fixes #10760 Reported-by: Jay Satiro Closes #10781 - rtsp: use dynbuf instead of custom reallocs For the RTP buffering. Closes #10776 - libssh2: remove unused variable from libssh2's struct Closes #10777 - RELEASE-NOTES: synced - multi: remove PENDING + MSGSENT handles from the main linked list As they are not driving transfers or any socket activity, the main loop does not need to iterate over these handles. A performance improvement. They are instead only held in their own separate lists. Assisted-by: Stefan Eissing Ref: #10743 Closes #10762 - multi: turn link/unlinking easy handles into dedicated functions - http_aws_sigv4: fix scan-build "value stored to 'ret' is never read" Follow-up to 495d09810aa9a Closes #10766 - lib: skip Curl_llist_destroy calls Linked lists themselves do not carry any allocations, so for the lists that do not have have a set destructor we can just skip the Curl_llist_destroy() call and save CPU time. Closes #10764 - lib643: LIB644 is never defined, this is dead code Closes #10765 - libtest/Makefile.inc: remove superfluous variables Rely on the defaults when possible. Closes #10765 - tests/http: remove year ranges from copyrights Closes #10763 Casey Bodley (14 Mar 2023) - aws_sigv4: fall back to UNSIGNED-PAYLOAD for sign_as_s3 all s3 requests default to UNSIGNED-PAYLOAD and add the required x-amz-content-sha256 header. this allows CURLAUTH_AWS_SIGV4 to correctly sign s3 requests to amazon with no additional configuration Signed-off-by: Casey Bodley <cbodley@redhat.com> Closes #9995 Viktor Szakats (14 Mar 2023) - wolfssl: add quic/ngtcp2 detection in cmake, and fix builds - add QUIC/ngtcp2 detection in CMake with wolfSSL. Because wolfSSL uses zlib if available, move compression detection before TLS detection. (OpenSSL might also need this in the future.) - wolfSSL 5.5.0 started using C99 types in its `quic.h` header, but it doesn't #include the necessary C99 header itself, breaking builds (unless another dependency pulled it by chance.) Add local workaround for it. For this to work with all build tools, we had to fix our header detection first. Ref: #10745 Ref: https://github.com/curl/curl-for-win/commit/6ad5f6ecc15620c15625fc4434 76b3a1ecef4f3f Closes #10739 Stefan Eissing (14 Mar 2023) - secure-transport: fix recv return code handling Return code handling of recv calls were not always correct when an error occured or the connection was closed. Closes #10717 - http2: Use KEEP_SEND_HOLD for flow control in HTTP/2 - use the defined, but so far not used, KEEP_SEND_HOLD bit for flow control based suspend of sending in transfers. Prior to this change KEEP_SEND_PAUSE bit was used instead, but that can interfere with pausing streams from the user side via curl_easy_pause. Fixes https://github.com/curl/curl/issues/10751 Closes https://github.com/curl/curl/pull/10753 Dan Fandrich (13 Mar 2023) - tests: fix control code that hid some text in runtests.1 - tests: sync option lists in runtests.pl & its man page Daniel Stenberg (13 Mar 2023) - multi: make multi_perform ignore/unignore signals less often For improved performance Reported-by: Jerome St-Louis Ref: #10743 Closes #10750 Viktor Szakats (13 Mar 2023) - cmake: delete unused HAVE__STRTOI64 Also delete obsolete surrounding comments. Reviewed-by: Daniel Stenberg Closes #10756 - CI: fix copyright header Follow-up to 395b9175b7422d699fa93643973295c106cdf147 Daniel Stenberg (13 Mar 2023) - RELEASE-PROCEDURE.md: update coming release dates Stefan Eissing (13 Mar 2023) - tests/http: add pytest to GHA and improve tests - added to: ngtcp2-quictls, ngtcp2-gnutls and the linux varians quiche, bearssl, libressl, mbedtls, openssl3, rustls - added disabled in ngtcp2-wolfssl due to weird SSL_connect() errors not reproducable locally Improvements on pytest: - handling of systems with nghttpx in $PATH - configure will seach $PATH got nghttpx used in pytest - pytest fixes for managing nghttpx without h3 support - ngtcp2-wolfssl: use a fully enabled wolfssl build - lower parallel count for http/1.1 tests, since we do not want to test excessive connections. - check built curl for HTTPS-proxy support in proxy tests - bearssl does not like one of our critical cert extensions, making it non-critical now - bearssl is too slow for test_12, skipping - making sure we do h3 tests only when curl and server support is there Closes #10699 Marcel Raad (13 Mar 2023) - tool_operate: silence unused parameter warning `global` is only used in the `my_setopt` macro version without `CURL_DISABLE_LIBCURL_OPTION` since commit 4774decf10a. Closes https://github.com/curl/curl/pull/10752 Viktor Szakats (13 Mar 2023) - build: fix stdint/inttypes detection with non-autotools Fix `stdint.h` and `inttypes.h` detection with non-autotools builds on Windows. (autotools already auto-detected them accurately.) `lib/config-win32.h` builds (e.g. `Makefile.mk`): - set `HAVE_STDINT_H` where supported. - set `HAVE_INTTYPES_H` for MinGW. CMake: - auto-detect them on Windows. (They were both force-disabled.) - delete unused `CURL_PULL_STDINT_H`. - delete unused `CURL_PULL_INTTYPES_H`. - stop detecting `HAVE_STDINT_H` twice. Present since the initial CMake commit: 4c5307b45655ba75ab066564afdc0c111a8 b9291 curl doesn't use these C99 headers, we need them now to workaround broken wolfSSL builds. Ref: #10739 Once that clears up, we can delete these detections and macros (unless we want to keep them for future us.) Reviewed-by: Daniel Stenberg Closes #10745 Daniel Stenberg (13 Mar 2023) - RELEASE-NOTES: synced - ftp: add more conditions for connection reuse Reported-by: Harry Sintonen Closes #10730 Dan Fandrich (12 Mar 2023) - tests: make first.c the same for both lib tests and unit tests The only difference used to be global variable used in unittest tests. After cb7ed5a removed individual flag overrides for the unittests, first.c was no longer recompiled for unit tests to include the flag, so whether it worked or gave a link error depended on whether it was compiled in libtest or unittest first. This way also speeds up the build by eliminating 40 identical compile invocations. Fixes #10749 - tests: use AM_CPPFILES to modify flags in unit tests Using CPPFLAGS sometimes caused odd compile issues when building tests with parallel make and AM_CPPFILES is the right flag, anyway. Follow-up to cb7ed5a Ref #10749 Viktor Szakats (13 Mar 2023) - Makefile.mk: fix -g option in debug mode [ci skip] Add it to `CFLAGS` (was: `LDFLAGS`). Closes #10747 Jay Satiro (12 Mar 2023) - tool: improve --stderr handling - freopen stderr with the user-specified file (--stderr file) instead of using a separate 'errors' stream. - In tool_setup.h override stdio.h's stderr macro as global variable tool_stderr. Both freopen and overriding the stderr macro are necessary because if the user-specified filename is "-" then stdout is assigned to tool_stderr and no freopen takes place. See the PR for more information. Ref: https://github.com/curl/curl/issues/10491 Closes https://github.com/curl/curl/pull/10673 Dan Fandrich (11 Mar 2023) - CI: don't run CI jobs if only another CI was changed Also skip builds on non-Windows platforms when only Windows build files have changed. This should reduce the number of useless builds and the associated waiting time and chance of spurious failures, freeing resources for new PRs. Closes #10742 - http: don't send 100-continue for short PUT requests This is already how curl is documented to behave in Everything curl, but in actuality only short POSTs skip this. This should knock 30 seconds off a full run of the test suite since the 100-continue timeout will no longer be hit. Closes #10740 - tests: add DELAY keyword to more tests using waits - tests: hack to build most unit tests under cmake These are only built when a libcurl static library is available, since we're not building a special libcurlu library yet and these tests rely on private symbols that aren't available in the shared library. A few unit tests do require libcurlu, so those are not built. Closes #10722 - tests: fix MSVC unreachable code warnings in unit tests Switch unit1654 to use the proper test macros as well. - tests: make CPPFLAGS common to all unit tests There's no need to specify them individually. - tests: keep cmake unit tests names in sync Put only the test names into Makefile.inc so they can be used by both cmake and automake. This will prevent the list of tests from becoming out of date when they are also built under cmake. Viktor Szakats (11 Mar 2023) - src: silence wmain() warning for all build methods llvm/clang and gcc doesn't recognize the wmain() function in Unicode Windows builds: llvm/clang: ``` ../../src/tool_main.c:239:5: warning: no previous prototype for function 'wma in' [-Wmissing-prototypes] int wmain(int argc, wchar_t *argv[]) ^ 1 warning generated. ``` gcc: ``` ../../src/tool_main.c:239:5: warning: no previous prototype for 'wmain' [-Wmi ssing-prototypes] 239 | int wmain(int argc, wchar_t *argv[]) | ^~~~~ ``` Before this patch, we already silenced it with CMake. This patch moves the silencing to the source, so that it applies to all build tools. Bug: https://github.com/curl/curl/issues/7229#issuecomment-1464806651 Reviewed-by: Marcel Raad Closes #10744 Dan Fandrich (10 Mar 2023) - CI: fix retrying on brew failures The previous attempt didn't consider that the shell would exit immediately after the false statement in the retry case. Follow-up to dc141a37 Stefan Eissing (10 Mar 2023) - http2: fix error handling during parallel operations RST and connection close were not handled correctly during parallel transfers, leading to aborted response bodies being reported complete. Closes #10715 Daniel Stenberg (10 Mar 2023) - url: only reuse connections with same GSS delegation Reported-by: Harry Sintonen Closes #10731 Viktor Szakats (10 Mar 2023) - lib: silence clang/gcc -Wvla warnings in brotli headers brotli v1.0.0 throughout current latest v1.0.9 and latest master [1] trigger this warning. It happened with CMake and GNU Make. autotools builds avoid it with the `convert -I options to -isystem` macro. llvm/clang: ``` In file included from ./curl/lib/content_encoding.c:36: ./brotli/x64-ucrt/usr/include/brotli/decode.h:204:34: warning: variable lengt h array used [-Wvla] const uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(encoded_size)], ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./brotli/x64-ucrt/usr/include/brotli/port.h:253:34: note: expanded from macro 'BROTLI_ARRAY_PARAM' ^~~~~~ In file included from ./curl/lib/content_encoding.c:36: ./brotli/x64-ucrt/usr/include/brotli/decode.h:206:48: warning: variable lengt h array used [-Wvla] uint8_t decoded_buffer[BROTLI_ARRAY_PARAM(*decoded_size)]); ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ ./brotli/x64-ucrt/usr/include/brotli/port.h:253:35: note: expanded from macro 'BROTLI_ARRAY_PARAM' ~^~~~~ ``` gcc: ``` In file included from ./curl/lib/content_encoding.c:36: ./brotli/x64-ucrt/usr/include/brotli/decode.h:204:5: warning: ISO C90 forbids variable length array 'encoded_buffer' [-Wvla] 204 | const uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(encoded_size)], | ^~~~~ ./brotli/x64-ucrt/usr/include/brotli/decode.h:206:5: warning: ISO C90 forbids variable length array 'decoded_buffer' [-Wvla] 206 | uint8_t decoded_buffer[BROTLI_ARRAY_PARAM(*decoded_size)]); | ^~~~~~~ ``` [1] https://github.com/google/brotli/commit/ed1995b6bda19244070ab5d331111f16f 67c8054 Reviewed-by: Daniel Stenberg Reviewed-by: Marcel Raad Closes #10738 Daniel Stenberg (10 Mar 2023) - curl_path: create the new path with dynbuf Closes #10729 - url: remove dummy protocol handler Just two added checks were needed saves a whole handler struct. Closes #10727 Dan Fandrich (10 Mar 2023) - CI: retry a failed brew update too, not just brew install Also, make sure an eventual failure ends up returning a failure code so the job stops. Daniel Stenberg (10 Mar 2023) - url: fix the SSH connection reuse check Reported-by: Harry Sintonen Closes #10735 - CURLOPT_PROXY.3: curl+NSS does not handle HTTPS over unix domain socket It results in error "NSS error -5985 (PR_ADDRESS_NOT_SUPPORTED_ERROR)" Disabled test 1470 for NSS builds and documented the restriction. Reported-by: Dan Fandrich Fixes #10723 Closes #10734 - CURLSHOPT_SHARE.3: HSTS sharing is not thread-safe Reported-by: Hiroki Kurosawa Closes #10732 - telnet: only accept option arguments in ascii To avoid embedded telnet negotiation commands etc. Reported-by: Harry Sintonen Closes #10728 - test1903: test use of COOKIEFILE - reset - COOKIEFILE This also tests for the memory leak bug fixed by parent commit b559ef6f. Ref: #10694 Closes https://github.com/curl/curl/pull/10712 Jay Satiro (10 Mar 2023) - url: fix cookielist memleak when curl_easy_reset - Free set.cookelist in Curl_freeset instead of Curl_close. Prior to this change the cookielist linked list wasn't freed by curl_easy_reset which calls Curl_freeset to free all set. Bug: https://github.com/curl/curl/issues/10694#issuecomment-1458619157 Reported-by: Sergey Ryabinin Closes https://github.com/curl/curl/pull/10709 Dan Fandrich (10 Mar 2023) - tests: fix some keywords and unused sections - tests: fix test1301 to call the right binary It was refactored in commit 480ac6e5 but this step was missed. - tests: add timeout, SLOWDOWN and DELAY keywords to tests These are tests that are testing timing and end up being quite slow. Daniel Stenberg (10 Mar 2023) - RELEASE-NOTES: synced Stefan Eissing (10 Mar 2023) - wolfSSL: ressurect the BIO `io_result` In pytest'ing the situation occored that wolfSSL reported an IO error when the underlying BIO operation was returning an CURLE_AGAIN condition. Readding the `io_result` filter context member to detect such situations. Also, making sure that the returned CURLcode is initialized on all recv operations outcome. Closes #10716 - gssapi: align global `gss_OID_desc` vars to silence ld warnings on macOS vent ura Refs #9975 which first reported this. Closes #10718 Daniel Stenberg (10 Mar 2023) - libssh2: only set the memory callbacks when debugging This makes us debug libssh2 less and libcurl more when for example running torture tests that otherwise will spend a lot of time in libssh2 functions. We leave libssh2 to test libssh2. Closes #10721 - docs/SECURITY-PROCESS.md: updates - allow Low+Medium issues to be managed through plain PRs - update the bug-bounty part to reflect current reality Closes #10719 Dan Fandrich (9 Mar 2023) - tests: fix tag markup issues in some tests Marcel Raad (9 Mar 2023) - tests: add `cookies` features These tests don't work with `--disable-cookies`. Closes https://github.com/curl/curl/pull/10713 - test420: add cookies keyword It fails with `--disable-cookies`. Closes https://github.com/curl/curl/pull/10713 Dan Fandrich (8 Mar 2023) - CI: Add more labeler match patterns Also, add the CI, tests or libcurl API tags in conjunction with any others that might also apply. Andy Alt (9 Mar 2023) - GHA: minor improvements to spellcheck Closes #10640 Daniel Stenberg (9 Mar 2023) - test1671: fix after fix - test421: -w %{header_json} test with multiple same header names To reproduce the issue in #10704 - tool_writeout_json. fix the output for duplicate header names Header entries with index != 0 are handled at the index 0 level so they should then be skipped when iterated over. Reported-by: Boris Okunskiy Fixes #10704 Closes #10707 - headers: make curl_easy_header and nextheader return different buffers By letting curl_easy_header() and curl_easy_nextheader() store the header data in their own struct storage when they return a pointer to it, it makes it possible for applications to use them both in a loop. Like the curl tool does. Reported-by: Boris Okunskiy Fixes #10704 Closes #10707 rcombs (8 Mar 2023) - urlapi: take const args in _dup and _get functions Closes #10708 - urlapi: avoid mutating internals in getter routine This was not intended. Closes #10708 Daniel Stenberg (8 Mar 2023) - urlapi: '%' is illegal in host names Update test 1560 to verify Ref: #10708 Closes #10711 - ftp: make the 'ftpauth' a more normal 'char *'-array Closes #10703 Evgeny Grin (Karlson2k) (8 Mar 2023) - doc: fix compiler warning in libcurl.m4 Current test for curl_free() may produce warnings with strict compiler flags or even with default compiler flags with upcoming versions. These warning could turned into errors by -Werror or similar flags. Such warnings/errors are avoided by this patch. Closes #10710 Viktor Szakats (8 Mar 2023) - misc: fix typos Closes #10706 Stefan Eissing (7 Mar 2023) - ftp: active mode with SSL, add the damn filter - since 7.87.0 we lost adding the SSL filter for an active FTP connection that uses SSL. This leads to hangers and timeouts as reported in #10666. Reported-by: SandakovMM on github Fixes #10666 Closes #10669 Daniel Stenberg (7 Mar 2023) - docs: extend the URL API descriptions Closes #10701 Stefan Eissing (7 Mar 2023) - url: fix logic in connection reuse to deny reuse on "unclean" connections - add parameter to `conn_is_alive()` cfilter method that returns if there is input data waiting on the connection - refrain from re-using connnection from the cache that have input pending - adapt http/2 and http/3 alive checks to digest pending input to check the connection state - remove check_cxn method from openssl as that was just doing what the socket filter now does. - add tests for connection reuse with special server configs Closes #10690 Daniel Stenberg (6 Mar 2023) - x509asn1: use plain %x, not %lx, when the arg is an int Pointed out by Coverity. Closes #10689 Stefan Eissing (6 Mar 2023) - http2: fix handling of RST and GOAWAY to recognize partial transfers - a reset transfer (HTTP/2 RST) did not always lead to the proper error message on receiving its response, leading to wrong reports of a successful transfer - test_05_02 was able to trigger this condition with increased transfer count. The simulated response errors did not carry a 'Content-Length' so only proper RST handling could detect the abort - When doing such transfers in parallel, a connection could enter the state where a) it had been closed (GOAWAY received) b) the RST had not been "seen" for the transfer yet or c) the GOAWAY announced an error and the last successful stream id was not checked against ongoing transfers Closes #10693 - tests: use dynamic ports numbers in pytest suite - necessary ports are bound at start of test suite and then given to server fixtures for use. - this make parallel use of pytest (in separate directories), practically safe for use as OS tend to not reuse such port numbers for a while Closes #10692 - connect: fix time_connect and time_appconnect timer statistics - time_connect was not updated when the overall connection failed, e.g. when SSL verification was unsuccessful, refs #10670 - rework gather those values to interrogate involved filters, also from all eyeballing attempts, to report the maximum of those values. - added 3 test cases in test_06 to check reported values on successful, partially failed and totally failed connections. Reported-by: Master Inspire Fixes #10670 Closes #10671 Daniel Stenberg (6 Mar 2023) - test1905: update output cookie order After the #10685 update - test420: verify expiring cookies Cookies that are loaded fine from a jar but then are expired in headers. - cookie: don't load cookies again when flushing Reported-by: Sergio Mijatovic Fixes #10677 Closes #10685 - RELEASE-NOTES: synced Andy Alt (6 Mar 2023) - docs: note '--data-urlencode' option Closes #10687 Daniel Stenberg (6 Mar 2023) - DEPRECATE: the original legacy mingw version 1 Remove completely in September 2023 Closes #10667 Harry Sintonen (6 Mar 2023) - rand: use arc4random as fallback when available Normally curl uses cryptographically strong random provided by the selected SSL backend. If compiled without SSL support, a naive built-in function was used instead. Generally this was okay, but it will result in some downsides for non- SSL builds, such as predictable temporary file names. This change ensures that arc4random will be used instead, if available. Closes #10672 Grisha Levit (6 Mar 2023) - tool: dump headers even if file is write-only The fixes in #10079 brought a (seemingly unrelated) change of open mode from `wb`/`ab` to `wb+`/`ab+` for the headerfile. This makes it no longer possible to write the header file to e.g. a pipe, like: curl -D >(grep ...) file:///dev/null Which presently results in `Warning: Failed to open /dev/fd/63` See #10079 Closes #10675 Jay Satiro (6 Mar 2023) - tests: fix gnutls-serv check - If gnutls-serv doesn't exist then don't try to execute it. Follow-up to 2fdc1d81. Closes https://github.com/curl/curl/pull/10688 Daniel Stenberg (6 Mar 2023) - lib1560: fix enumerated type mixed with another type Follow-up to c84c0f9aa3bb006 Closes #10684 Viktor Szakats (5 Mar 2023) - cmake: fix enabling LDAPS on Windows Before this patch, enabling LDAPS required a manual C flag: https://github.com/curl/curl-for-win/blob/c1cfc31cfc04f24f7a4f946564d6f0e1b4d 7dd36/curl-cmake.sh#L105 Fix this and enable LDAPS automatically when using `wldap32` (and when not explicitly disabled). This matches autotools and `Makefile.mk` behavior. Also remove issue from KNOWN_BUGS. Add workaround for MSVS 2010 warning triggered by LDAPS now enabled in more CI tests: `ldap.c(360): warning C4306: 'type cast' : conversion from 'int' to 'void *' of greater size` Ref: https://ci.appveyor.com/project/curlorg/curl/builds/46408284/job/v8mwl9y fbmoeqwlr#L312 Reported-by: JackBoosY on github Reviewed-by: Jay Satiro Reviewed-by: Marcel Raad Fixes #6284 Closes #10674 - Makefile.mk: delete redundant `HAVE_LDAP_SSL` macro [ci skip] Since abebb2b8939c6b3e0f951eb2d9ec3729b569aa2c, we set this macro for all Windows `wldap32` builds using `Makefile.mk`. For OpenLDAP builds this macro is not enough to enable LDAPS, and OpenLDAP is not an option in `Makefile.mk`. For Novell LDAP it might have helped, but it's also not an option anymore in `Makefile.mk`. The future for LDAPS is that we should enable it by default without extra build knobs. Reviewed-by: Marcel Raad Closes #10681 - cmake: skip CA-path/bundle auto-detection in cross-builds Also remove issue from KNOWN_BUGS. Reported-by: Cristian Morales Vega Reviewed-by: Marcel Raad Fixes #6178 Closes #10676 Daniel Stenberg (3 Mar 2023) - schannel: loop over the algos to pick the selected one Avoid using the funny macro and the extra buffer copy. Closes #10647 - wildcard: remove files and move functions into ftplistparser.c - ftp: allocate the wildcard struct on demand The feature is rarely used so this frees up data for the vast majority of easy handles that don't use it. Rename "protdata" to "ftpwc" since it is always an FTP wildcard struct pointer. Made the state struct field an unsigned char to save space. Closes #10639 - lib1560: test parsing URLs with ridiculously large fields In the order of 120K. Closes #10665 Brad Spencer (3 Mar 2023) - urlapi: parse IPv6 literals without ENABLE_IPV6 This makes the URL parser API stable and working the same way independently of libcurl supporting IPv6 transfers or not. Closes #10660 Jan Engelhardt (3 Mar 2023) - build: drop the use of XC_AMEND_DISTCLEAN Because automake used to delete depdirs at once (.deps) and there was an issu e with portability, curl's XC_AMEND_DISTCLEAN greps the Makefiles in an attempt to build a list of all depfiles and delete them individually instead. Since commit 08849db866b44510f6b8fd49e313c91a43a3dfd3, automake switched from deleting directories to individual files. curl's custom logic now finds a lot more results with the grep (the filtering of these results isn't great), whic h causes a massive bloating of the Makefile in the order of O(n^2). Also remove now-unused XC_AMEND_DISTCLEAN macro group References: https://github.com/curl/curl/issues/9843 References: https://debbugs.gnu.org/cgi/bugreport.cgi?bug=59288 Reported-by: Ilmari Lauhakangas Fixes #9843 Closes #10661 Balakrishnan Balasubramanian (3 Mar 2023) - test1470: test socks proxy using unix sockets and connect to https Similar to test1468 except using https instead of http Closes #10662 Daniel Stenberg (3 Mar 2023) - test1960: verify CURL_SOCKOPT_ALREADY_CONNECTED When returned from the CURLOPT_SOCKOPTFUNCTION, like when we have a custom socket connected in the app, passed in to libcurl. Verifies the fix in #10648 Closes #10651 Stefan Eissing (2 Mar 2023) - tests: rename tests/tests-httpd to tests/http - httpd is only one server we test with - the suite coveres the HTTP protocol in general where the default test cases need a more beefy environment Closes #10654 - socket: detect "dead" connections better, e.g. not fit for reuse - refs #10646 where reuse was attempted on closed connections in the cache, leading to an exhaustion of retries on a transfer - the mistake was that poll events like POLLHUP, POLLERR, etc were regarded as "not dead". - change cf-socket filter check to regard such events as inidication of corpsiness. - vtls filter checks: fixed interpretation of backend check result when inconclusive to interrogate status further down the filter chain. Reported-by: SendSonS on github Fixes #10646 Closes #10652 - lib: give source files cf-http.* better fitting names Closes #10656 - http2: fix code indent Closes https://github.com/curl/curl/pull/10655 Shankar Jadhavar (1 Mar 2023) - cf-socket: if socket is already connected, return CURLE_OK In 7.87.0, if callback method for CURLOPT_SOCKOPTFUNCTION returns CURL_SOCKOPT_ALREADY_CONNECTED then curl library used to return CURLE_OK. n 7.88.0, now even if callback returns CURL_SOCKOPT_ALREADY_CONNECTED, curl library still tries to connect to socket by invoking method do_connect(). This is regression caused by commit https://github.com/curl/curl/commit/71b7e0161032927cdfb Fix: Check if we are already connected and return CURLE_OK. Fixes #10626 Closes #10648 Jay Satiro (1 Mar 2023) - DYNBUF.md: note Curl_dyn_add* calls Curl_dyn_free on failure This is the existing behavior and it has been widely assumed in the codebase. Closes https://github.com/curl/curl/pull/10645 Stefan Eissing (1 Mar 2023) - http2: fix upload busy loop - Set KEEP_SEND_PAUSE when exhausting remote HTTP/2 window size of a stream. - Clear KEEP_SEND_PAUSE when receiving HTTP/2 window updates on a paused stream. - Also fix http2 send compiler warnings reported in #10449. Prior to this change, starting in 71b7e016 which precedes 7.88.0, libcurl may eat CPU during HTTP/2 upload. Reported-by: Jay Satiro Fixes https://github.com/curl/curl/issues/10449 Fixes https://github.com/curl/curl/issues/10618 Closes https://github.com/curl/curl/pull/10627 Daniel Stenberg (1 Mar 2023) - sectransp: make read_cert() use a dynbuf when loading Closes #10632 Jay Satiro (1 Mar 2023) - transfer: limit Windows SO_SNDBUF updates to once a second - Change readwrite_upload() to call win_update_buffer_size() no more than once a second to update SO_SNDBUF (send buffer limit). Prior to this change during an upload readwrite_upload() could call win_update_buffer_size() anywhere from hundreds of times per second to an extreme test case of 100k per second (which is likely due to a bug, see #10618). In the latter case WPA profiler showed win_update_buffer_size was the highest capture count in readwrite_upload. In any case the calls were excessive and unnecessary. Ref: https://github.com/curl/curl/pull/2762 Closes https://github.com/curl/curl/pull/10611 Daniel Stenberg (28 Feb 2023) - RELEASE-NOTES: synced Stefan Eissing (28 Feb 2023) - http2: fix for http2-prior-knowledge when reusing connections - refs #10634 where errors in the HTTP/2 framing layer are observed. - the bug was that on connection reuse, the code attempted to switch in yet another layer of HTTP/2 handling instead of detecting that this was already in place. - added pytest testcase reproducing the issue. Reported-by: rwmjones on github Fixes #10634 Closes #10643 - cf-socket: fix handling of remote addr for accepted tcp sockets - do not try to determine the remote address of a listen socket. There is none. - Update remote address of an accepted socket by getpeername() if available. Reported-by: Harry Sintonen Fixes #10622 Closes #10642 - http: fix unix domain socket use in https connects - when h2/h3 eyeballing was involved, unix domain socket configurations were not honoured - configuring --unix-socket will disable HTTP/3 as candidate for eyeballing - combinatino of --unix-socket and --http3-only will fail during initialisati on - adding pytest test_11 to reproduce Reported-by: Jelle van der Waa Fixes #10633 Closes #10641 Daniel Stenberg (28 Feb 2023) - setopt: move the CURLOPT_CHUNK_DATA pointer to the set struct To make duphandle work etc Closes #10635 Viktor Szakats (28 Feb 2023) - quic/schannel: fix compiler warnings Fixes #10603 Closes #10616 Daniel Stenberg (28 Feb 2023) - page-footer: add explanation for three missing exit codes Added in 7.73.0, 7.77.0 and 7.84.0 Closes #10630 積丹尼 Dan Jacobson (28 Feb 2023) - rate.c: single URLs make no sense in --rate example Here somehow you need to put more than one URL in these examples, else they will make no sense, as --rate only affects the second and beyond URLs. The first URL will always finish the same time no matter what --rate is given. Closes #10638 Daniel Stenberg (28 Feb 2023) - libcurl-errors.3: add the CURLHcode errors from curl_easy_header.3 Closes #10629 - mqtt: on send error, return error Reported-by: Maciej Domanski Closes #10623 - ws: keep the socket non-blocking Reported-by: marski on github Fixes #10615 Closes #10625 - hostip: avoid sscanf and extra buffer copies Also made create_hostcache_id() return the id length. Closes #10601 - PARALLEL-TRANSFERS.md: not "early days" for this anymore Refresh the language as the support is now over three years old Closes #10624 - easy: remove infof() debug leftover from curl_easy_recv It said "reached [path]/easy.c:1231" Closes #10628 - idn: return error if the conversion ends up with a blank host Some IDN sequences are converted into "" (nothing), which can make this function end up with a zero length host name and we cannot consider that a valid host to continue with. Reported-by: Maciej Domanski Closes #10617 - examples/http3.c: use CURL_HTTP_VERSION_3 and update the comment Closes #10619 - x509asn1.c: use correct format specifier for infof() call Detected by Coverity Closes #10614 - Revert "GHA: add Microsoft C++ Code Analysis" This reverts commit e0db842b2a082dffad4a9fbe31321e9a75c74041. This tool seems very restricted in how often it might be used by a project and thus very quickly start to report fails simply because it refuses to run when "there are more runs than allowed". Closes #10613 Patrick Monnerat (25 Feb 2023) - tests: test secure mail protocols with explicit SSL requests New tests 987, 988 and 989, disabled for rustls (hanging). Closes #10077 - tests: support for imaps/pop3s/smtps protocols Closes #10077 - runtests: use a hash table for server port numbers Closes #10077 Andy Alt (25 Feb 2023) - INTERNALS.md: grammar Closes #10607 Daniel Stenberg (25 Feb 2023) - RELEASE-NOTES: synced Philip Heiduck (25 Feb 2023) - .cirrus.yml: Bump to FreeBSD 13.2 Closes #10270 - ngtcp2-gnutls.yml: bump to gnutls 3.8.0 Closes #10507 - CI: update ngtcp2 and nghttp2 for pytest Follow-up: https://github.com/curl/curl/commit/5c9ee8cef4b351a085b440f8178500 124647f8e6 Closes #10508 Andy Alt (25 Feb 2023) - GHA: use same flags for Slackbuild as Slack package Closes #10526 Daniel Stenberg (24 Feb 2023) - rtsp: avoid sscanf for parsing Closes #10605 - http_proxy: parse the status line without sscanf Closes #10602 - telnet: error correctly for WS set to "x[num]" Follow-up to e4f93be9d587 Reported-by: Harry Sintonen Closes #10606 - krb5: avoid sscanf for parsing Closes #10599 - misc: remove support for curl_off_t < 8 bytes Closes #10597 - telnet: parse NEW_ENVIRON without sscanf Closes #10596 - telnet: parse the WS= argument without sscanf Closes #10596 - telnet: parse telnet options without sscanf Closes #10596 - ftp: replace sscanf for MDTM 213 response parsing Closes #10590 - ftp: replace sscanf for PASV parsing Closes #10590 - ftp: make the EPSV response parser not use sscanf Closes #10590 Stefan Eissing (24 Feb 2023) - ngtcp2: fix unwanted close of file descriptor 0 ... causing macOS to hand out 0 as next socket handle and failing on further operations. Reported-by: Sergey Fionov Fixes #10593 Closes #10595 Daniel Stenberg (23 Feb 2023) - select: stop treating POLLRDBAND as an error POLLRDBAND does not seem to be an general error and on Windows the value for POLLIN is 768 and the value for POLLRDBAND is 512. Fixes #10501 Reported-by: opensslonzos-github on github Closes #10592 - test978: mark file as text mode Follow-up to 4ea5702980cb To fix test failures on Windows Closes #10594 - http: rewrite the status line parser without sscanf Closes #10585 - test978: verify that --stderr works for -w's stderr as well Jay Satiro (23 Feb 2023) - curl: make -w's %{stderr} use the file set with --stderr Reported-by: u20221022 on github Fixes #10491 Closes #10569 - winbuild: fix makefile clean - Fix and move 'clean' code that removes the output and obj directories trees from MakefileBuild.vc to Makefile.vc. Prior to this change the 'clean' code did not work right because the variables containing the directory names were not fully initialized and the rmdir syntax was sometimes incorrect (typos). DIRDIST for example was set to ..\builds\ and not ..\builds\$(CONFIG_NAME_LIB)\ so it would remove the former and not the latter. If WITH_PREFIX was set then that directory was removed instead. Also, DIRDIST (the output directory) even if initialized should not be removed by MakefileBuild.vc because by that time it could be set to a user directory that may contain other files if WITH_PREFIX is set (eg we don't want rmdir /s /q C:\usr\local). Therefore we remove from Makefile.vc before any of that happens. I added a comment in both makefiles explaining this. Closes https://github.com/curl/curl/pull/10576 - sectransp: fix compiler warning c89 mixed code/declaration Since cbf57176 the Cirrus CI 'macOS arm64 SecureTransport http2' has been failing due to c89 warnings mixed code/declaration. That commit is not the cause so I assume something has changed in the CI outside of our configuration. Anyway, we don't mix code/declaration so this is the fix for that. Closes https://github.com/curl/curl/pull/10574 Philipp Engel (22 Feb 2023) - BINDINGS: add Fortran binding Closes #10589 Stefan Eissing (22 Feb 2023) - test2600: detect when ALARM_TIMEOUT is in use and adjust - use higher timeout values > 1s - skip duration checks Assisted-by: Marcel Raad Closes #10513 Daniel Stenberg (22 Feb 2023) - RELEASE-NOTES: synced - test686: verify return code for no URL after --next - tool_operate: propagate error codes for missing URL after --next Fixes #10558 Reported-by: u20221022 on github Closes #10580 - test1278: verify that an extra --no-remote-name cause no warning - tool_getparam: don't add a new node for just --no-remote-name Unless --remote-name-all is used. Fixes #10564 Reported-by: u20221022 on github Closes #10582 - gen.pl: add '%GLOBALS' as a variable for mainpage And use it in page-header to list all global command line options. - docs/cmdline-opts: mark all global options gen.pl now outputs a generic explanations for them for each option Fixes #10566 Reported-by: u20221022 on github Closes #10584 - GHA: add Microsoft C++ Code Analysis Closes #10583 - tool_progress: shut off progress meter for --silent in parallel Reported-by: finkjsc on github Fixes #10573 Closes #10579 - lib1560: add a test using %25 in the userinfo in a URL Closes #10578 Stefan Eissing (21 Feb 2023) - CURLOPT_PIPEWAIT: allow waited reuse also for subsequent connections As tested in test_02_07, when firing off 200 urls with --parallel, 199 wait for the first connection to be established. if that is multiuse, urls are added up to its capacity. The first url over capacity opens another connection. But subsequent urls found the same situation and open a connection too. They should have waited for the second connection to actually connect and make its capacity known. This change fixes that by - setting `connkeep()` early in the HTTP setup handler. as otherwise a new connection is marked as closeit by default and not considered for multiuse at all - checking the "connected" status for a candidate always and continuing to PIPEWAIT if no alternative is found. pytest: - removed "skip" from test_02_07 - added test_02_07b to check that http/1.1 continues to work as before Closes #10456 Daniel Stenberg (21 Feb 2023) - test419: verify --dump-header to file that cannot be created Closes #10571 - tool_operate: avoid fclose(NULL) on bad header dump file Fixes #10570 Reported-by: Jérémy Rabasco Closes #10571 - RELEASE-NOTES: synced Starting the journey towards 8.0.0 - cookie: parse without sscanf() Saves us from using 2*4096 bytes buffers on stack, the extra copies and more. Closes #10550 - lib517: verify time stamps without leading zeroes plus some more - parsedate: replace sscanf( for time stamp parsing Closes #10547 - parsedate: parse strings without using sscanf() - sscanf is slow and complex, avoid it - give up already if the string is 12 bytes or longer as no valid string can be that long - this can now be done without copy Closes #10547 Matt Jolly (20 Feb 2023) - tests: HTTP server fixups - httpserver.pl -> http-server.pl for consistency - add http3-server.pl to EXTRA_DIST; alphabetise for maintainability - nghttpx proxy invocation scripts should not use getcwd Closes #10568 Version 7.88.1 (20 Feb 2023) Daniel Stenberg (20 Feb 2023) - RELEASE-NOTES: synced 7.88.1 release - THANKS: add contributors from 7.88.1 - socketpair: allow EWOULDBLOCK when reading the pair check bytes Reported-by: Gunamoi Software Co-authored-by: Jay Satiro Fixes #10561 Closes #10562 Jay Satiro (18 Feb 2023) - tool_operate: fix scanbuild compiler warning Prior to this change Azure CI scanbuild warned of a potential NULL pointer string passed to strtol when CURLDEBUG enabled, even though the way the code was written it wouldn't have happened. Bug: https://github.com/curl/curl/commit/5479d991#r101159711 Reported-by: Marcel Raad Closes https://github.com/curl/curl/pull/10559 - curl_setup: Suppress OpenSSL 3 deprecation warnings - Define OPENSSL_SUPPRESS_DEPRECATED. OpenSSL 3 has deprecated some of the functions libcurl uses such as those with DES, MD5 and ENGINE prefix. We don't have replacements for those functions so the warnings were disabled in autotools and cmake builds, but still showed in other builds. Closes https://github.com/curl/curl/pull/10543 - build-openssl.bat: keep OpenSSL 3 engine binaries Prior to this change copying the OpenSSL 3 engine binaries failed because 'engines-1_1' (OpenSSL 1.1.x folder name) was erroneously used instead of 'engines-3'. The OpenSSL 3 builds would complete successfully but without the engine binaries. Closes https://github.com/curl/curl/pull/10542 ALittleDruid (18 Feb 2023) - cmake: fix Windows check for CryptAcquireContext Check for CryptAcquireContext in windows.h and wincrypt.h only, since otherwise this check may fail due to third party headers not found. Closes https://github.com/curl/curl/pull/10353 Daniel Stenberg (19 Feb 2023) - remote-header-name.d: mention that filename* is not supported and that you can use --clobber to allow overwriting. Ref: #10533 Closes #10555 Co-authored-by: Jay Satiro <raysatiro@yahoo.com> Pierrick Charron (18 Feb 2023) - CURLOPT_WS_OPTIONS.3: fix the availability version Closes #10557 Jacob Hoffman-Andrews (18 Feb 2023) - GHA: update rustls dependency to 0.9.2 This allows re-enabling test 312 for the rustls backend. Closes #10553 Philip Heiduck (18 Feb 2023) - HTTP3.md: update git branches Closes #10554 Stefan Eissing (17 Feb 2023) - urldata: remove `now` from struct SingleRequest - not needed Closes #10549 Daniel Stenberg (17 Feb 2023) - lib1560: add IPv6 canonicalization tests Closes #10552 - RELEASE-NOTES: synced - urlapi: do the port number extraction without using sscanf() - sscanf() is rather complex and slow, strchr() much simpler - the port number function does not need to fully verify the IPv6 address anyway as it is done later in the hostname_check() function and doing it twice is unnecessary. Closes #10541 Stefan Eissing (17 Feb 2023) - setopt: allow HTTP3 when HTTP2 is not defined Reported-by: Karthikdasari0423 on github Fixes #10538 Closes #10544 Jon Rumsey (17 Feb 2023) - os400: correct Curl_os400_sendto() Add const qualifier to 5th argument of Curl_os400_sendto() Make OS400 wrapper for sendto match the normal prototype of sendto() with a const qualifier. Fixes #10539 Closes #10548 Stefan Eissing (17 Feb 2023) - tests-httpd: add proxy tests for direct and tunneling checks on http: and https: Closes #10519 Daniel Stenberg (17 Feb 2023) - curl: make --silent work stand-alone - renamed the struct field to 'silent' to match the cmdline option - make --show-error toggle independently of --silent - make --silent independent of ->noprogress as well By doing this, the three options --silent, --no-progress-meter and --show-error should work independently of each other and also work with and without '--no-' prefix as documented. Reported-by: u20221022 on github Fixes #10535 Closes #10536 - socks: allow using DoH to resolve host names For SOCKS modes where a local host resolve is done. It was previously disabled in 12d655d4561, but a few local tests seem to indicate that it works fine. Works now because of the SOCKS refactor of 4a4b63daaa01ef59 that made it non-blocking. Reported-by: roughtex on github Fixes #10537 Closes #10540 Stefan Eissing (17 Feb 2023) - test: add test for HTTP/2 corruption as reported in #10525 - adding test_02_20 for reproducing the situation - using recently released mod_h2 Apache module - skipping test if an older version is installed - adding installation of current mod_h2 to github pytest workflow This reproduces the error reliable (for me) on the lib/http2.c version of curl 7.88.0. And passes with the recent curl master. Closes #10534 Daniel Stenberg (16 Feb 2023) - tool_operate: allow debug builds to set buffersize Using the CURL_BUFFERSIZE environment variable. Closes #10532 Stefan Eissing (16 Feb 2023) - connnect: fix timeout handling to use full duration - connect timeout was used at half the configured value, if the destination had 1 ip version 4 and other version 6 addresses (or the other way around) - extended test2600 to reproduce these cases Reported-by: Michael Kaufmann Fixes #10514 Closes #10517 Daniel Stenberg (16 Feb 2023) - tool_getparam: make --get a true boolean To match how it is documented in the man page. Fixes #10527 Reported-by: u20221022 on github Closes #10531 Harry Sintonen (16 Feb 2023) - http:: include stdint.h more readily Closes #10516 Stefan Eissing (16 Feb 2023) - tests: make the telnet server shut down a socket gracefully - test 1452 failed occasionally with ECONNRESET errnos in curl when the server closed the connection in an unclean state. Closes #10509 Harry Sintonen (16 Feb 2023) - http2: set drain on stream end Ensure that on_frame_recv() stream end will trigger a read if there is pending data. Without this it could happen that the pending data is never consumed. This combined with https://github.com/curl/curl/pull/10529 should fix https://github.com/curl/curl/issues/10525 Ref: https://github.com/curl/curl/issues/10525 Closes #10530 Stefan Eissing (16 Feb 2023) - http2: buffer/pausedata and output flush fix. * do not process pending input data when copying pausedata to the caller * return CURLE_AGAIN if the output buffer could not be completely written out. Ref: #10525 Closes #10529 Marcel Raad (16 Feb 2023) - krb5: silence cast-align warning Add an intermediate cast to `void *`, as done everywhere else when casting from `sockaddr *` to `sockaddr_in *`. Closes https://github.com/curl/curl/pull/10528 Daniel Stenberg (15 Feb 2023) - RELEASE-NOTES: synced bumped to 7.88.1 - tests: make sure gnuserv-tls has SRP support before using it Reported-by: fundawang on github Fixes #10522 Closes #10524 - runtests: fix "uninitialized value $port" by using a more appropriate variable Reported-by: fundawang on github Fixes #10518 Closes #10520 Version 7.88.0 (15 Feb 2023) Daniel Stenberg (15 Feb 2023) - RELEASE-NOTES: synced 7.88.0 release - THANKS: added contributors from 7.88.0 - openssl: rename 'errcode_t' to 'sslerr_t' Turns out "/usr/include/et/com_err.h" typedefs this type (without proper variable scoping). comerr is the "common error description library" that apparently might be use d by krb5 code, which then makes this header get used in a curl build. Reported-by: Bruno Henrique Batista Cruz da Silva Fixed #10502 Closes #10500 Dan Fandrich (13 Feb 2023) - CONTRIBUTE: More formally specify the commit description This codifies what people have actually used in git commits over the past 6 years. I've left off some lesser-used headers that appear to duplicate others and tried to describe a consistent use for several others that were used more arbitrarily. This makes it easier for new committers to find out the kinds of things we want to acknowledge, makes it easier to perform statistical analysis on commits, and opens the possibility of performing lint checks on descriptions before submission. Reviewed-by: Daniel Stenberg Reviewed-by: Jay Satiro Closes #10478 Stefan Eissing (13 Feb 2023) - openssl: test and fix for forward proxy handling (non-tunneling). - adding pytest test_10 cases for proxy httpd setup tests - fixing openssl bug in https: proxy hostname verification that used the hostname of the request and not the proxy name. Closes #10498 Daniel Stenberg (13 Feb 2023) - cmdline-opts/Makefile: on error, do not leave a partial And support 'make V=1' to show the full command line Closes #10497 - curl.1: make help, version and manual sections "custom" Instead of using "multi: boolean", as these are slightly special as in they do are not enable/disable ones. Fixes #10490 Reported-by: u20221022 on github Closes #10497 Stefan Eissing (13 Feb 2023) - tests: add tests for HTTP/2 and HTTP/3 to verify the header API Test 2403 and 2503 check "header_json" output and therefore use of header-api Closes #10495 Philip Heiduck (13 Feb 2023) - CI: update wolfssl / wolfssh to 5.5.4 / 1.4.12 Closes #10493 Daniel Stenberg (13 Feb 2023) - KNOW_BUGS: cleanups with some changed to TODOs - remove "Excessive HTTP/2 packets with TCP_NODELAY" This is not a bug. Rather room for improvement. I believe these have been fixed: - 17.4 Connection failures with parallel HTTP/2 - 17.5 HTTP/2 connections through HTTPS proxy frequently stall - remove "FTPS needs session reuse" That is still true, but curl should also do session reuse now. - remove "ASCII FTP" It is documented behavior, and not single user has asked for extended functionality here the last decade or so. - remove "Passive transfer tries only one IP address" add as a TODO - remove "DoH leaks memory after followlocation" With a recipe on how to reproduce, this is pointless to keep around - remove "DoH does not inherit all transfer options" add it as a TODO Closes #10487 Tatsuhiro Tsujikawa (13 Feb 2023) - GHA: bump ngtcp2 workflow dependencies Closes #10494 Patrick Monnerat (13 Feb 2023) - content_encoding: do not reset stage counter for each header Test 418 verifies Closes #10492 Daniel Stenberg (13 Feb 2023) - RELEASE-NOTES: synced Jay Satiro (13 Feb 2023) - multi: stop sending empty HTTP/3 UDP datagrams on Windows - Limit the 0-sized send procedure that is used to reset a SOCKET's FD_WRITE to TCP sockets only. Prior to this change the reset was used on UDP sockets as well, but unlike TCP sockets a 0-sized send actually sends out a datagram. Assisted-by: Marc Hörsken Ref: https://github.com/curl/curl/pull/9203 Fixes https://github.com/curl/curl/issues/9086 Closes https://github.com/curl/curl/pull/10430 Viktor Szakats (12 Feb 2023) - h3: silence compiler warnings Reviewed-by: Daniel Stenberg Fixes #10485 Closes #10486 Daniel Stenberg (12 Feb 2023) - smb: return error on upload without size The protocol needs to know the size ahead of time, this is now a known restriction and not a bug. Also output a clearer error if the URL path does not contain proper share. Ref: #7896 Closes #10484 Viktor Szakats (12 Feb 2023) - windows: always use curl's basename() implementation The `basename()` [1][2] implementation provided by mingw-w64 [3] makes assumptions about input encoding and may break with non-ASCII strings. `basename()` was auto-detected with CMake, autotools and since 68fa9bf3f5d7b4fcbb57619f70cb4aabb79a51f6 (2022-10-13), also in `Makefile.mk` after syncing its behaviour with the mainline build methods. A similar patch for curl-for-win broke official Windows builds earlier, in release 7.83.1_4 (2022-06-15). This patch forces all Windows builds to use curl's internal `basename()` implementation to avoid such problems. [1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/basename.html [2]: https://www.man7.org/linux/man-pages/man3/basename.3.html [3]: https://sourceforge.net/p/mingw-w64/mingw-w64/ci/master/tree/mingw-w64-c rt/misc/basename.c Reported-by: UnicornZhang on Github Assisted-by: Cherish98 on Github Reviewed-by: Daniel Stenberg Fixes #10261 Closes #10475 Philip Heiduck (12 Feb 2023) - Linux CI: Bump rustls-ffi to v0.9.1 Closes #10476 Daniel Stenberg (12 Feb 2023) - libtest: build lib2305 with multibyte as well Fixes a build regression. Follow-up to 5a9a04d5567 Reported-by: Viktor Szakats Ref: https://github.com/curl/curl/pull/10475#issuecomment-1426831800 Closes #10477 Dmitry Atamanov (12 Feb 2023) - cmake: fix dev warning due to mismatched arg The package name passed to find_package_handle_standard_args (BROTLI) does not match the name of the calling package (Brotli). This can lead to problems in calling code that expects find_package result variables (e.g., _FOUND) to follow a certain pattern. Closes https://github.com/curl/curl/pull/10471 James Keast (11 Feb 2023) - setopt: Address undefined behaviour by checking for null This addresses undefined behaviour found using clang's UBsan: curl/lib/setopt.c:177:14: runtime error: applying non-zero offset 1 to null p ointer SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior curl/lib/setopt.c:177 :14 in Closes #10472 Jacob Hoffman-Andrews (11 Feb 2023) - rustls: improve error messages Changes numeric error codes into verbose error codes in two places. Adds a prefix indicating that the error came from rustls, and in some places which function it came from. Adds special handling for RUSTLS_RESULT_UNEXPECTED_EOF, since the default message of "Unexpected EOF" is insufficiently explanatory. Closes #10463 Daniel Stenberg (11 Feb 2023) - openssl: remove dead code Follow-up to e8b00fcd6a Due to the new 'if(!nonblocking)' check on the block a level above, there is no need to check for it again within the same conditional. Detected by Coverity Closes #10473 - ngtcp2: replace removed define and stop using removed function They were removed upstream. Reported-by: Karthikdasari0423 on github Fixes #10469 Closes #10474 - scripts/delta: show percent of number of files changed since last tag - RELEASE-NOTES: synced Stefan Eissing (10 Feb 2023) - pytest: add a test case for PUSH related things. - checking that "103 Early Hints" are visible in curl's header dump file Closes #10452 Gregory Panakkal (10 Feb 2023) - WEBSOCKET.md: typo Fixing missing slash for ws protocol scheme Closes #10464 Stefan Eissing (10 Feb 2023) - vquic: stabilization and improvements vquic stabilization - udp send code shared between ngtcp2 and quiche - quiche handling of data and events improved ngtcp2 and pytest improvements - fixes handling of "drain" situations, discovered in scorecard tests with the Caddy server. - improvements in handling transfers that have already data or are already closed to make an early return on recv pytest - adding caddy tests when available scorecard improvemnts. - using correct caddy port - allowing tests for only httpd or caddy Closes #10451 Philip Heiduck (10 Feb 2023) - Linux CI: update some dependecies to latest tag Closes #10458 Daniel Stenberg (10 Feb 2023) - test2305: send 3 frames, 4097 bytes each, as one message Receive them using a 256 bytes buffer in a loop. - ws: fix recv of larger frames + remove 'oleft' from the struct + deal with "overflow data" in a separate dynbuf Reported-by: Mike Duglas Fixes #10438 Closes #10447 - curl/websockets.h: extend the websocket frame struct - sws: fix typo, indentation add more ws logging - test2304: remove stdout verification This cripples the test somewhat but the check was bad since depending on timing it could exit before the output was done, making the test flaky. Dan Fandrich (9 Feb 2023) - CI: Add more labeler match patterns - CI: Retry failed downloads to reduce spurious failures A temporary error with a remote server shouldn't cause a CI run to fail. Also, put a cap on the time to download to fail faster on a misbehaving server or connection and use HTTP compression where possible to reduce download times. Daniel Stenberg (9 Feb 2023) - no-clobber.d: only use long form options in man page text ... since they are expanded and the short-form gets mentioned automatically so if the short form is mentioned as well, it gets repeated. Fixes #10461 Closes #10462 Reported-by: Dan Fandrich - GHA: enable websockets in the torture job Closes #10448 - header.d: add a header file example Closes #10455 Stefan Eissing (9 Feb 2023) - HTTP/[23]: continue upload when state.drain is set - as reported in #10433, HTTP/2 uploads may stall when a response is received before the upload is done. This happens when the data->state.drain is set for such a transfer, as the special handling in transfer.c from then on only cared about downloads. - add continuation of uploads, if applicable, in this case. - add pytest case test_07_12_upload_seq_large to reproduce this scenario (although, current nghttp2 implementation is using drain less often) Reported-by: Lucas Pardue Fixes #10433 Closes #10443 - http2: minor buffer and error path fixes - use memory buffer in full available size - fail receive of reset/errored streams early pytest: - make test_05 error cases more reliable Closes #10444 Federico Pellegrin (9 Feb 2023) - openldap: fix missing sasl symbols at build in specific configs If curl is built with openldap support (USE_OPENLDAP=1) but does not have also some other protocol (IMAP/SMTP/POP3) enabled that brings in Curl_sasl_* functions, then the build will fail with undefined references to various symbols: ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_decode_mech' ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_parse_url_auth _option' ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_cleanup' ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_can_authentica te' ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_continue' ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_start' ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_init' This was tracked down to these functions bein used in openldap.c but defined in curl_sasl.c and then forward in two vauth/ files to have a guard against a set of #define configurations that was now extended to cover also this case. Example configuration targeted that could reproduce the problem: curl 7.87.1-DEV () libcurl/7.87.1-DEV .... OpenLDAP/2.6.3 Protocols: file ftp ftps http https ldap ldaps Closes #10445 Daniel Stenberg (9 Feb 2023) - ws: use %Ou for outputting curl_off_t with info() Reported-by: Mike Duglas Fixes #10439 Closes #10441 Jay Satiro (9 Feb 2023) - curl_setup: Disable by default recv-before-send in Windows Prior to this change a workaround for Windows to recv before every send was enabled by default. The way it works is a recv is called before every send and saves the received data, in case send fails because in Windows apparently that can wipe out the socket's internal received data buffer. This feature has led to several bugs because the way libcurl operates it waits on a socket to read or to write, and may not at all times check for buffered receive data. Two recent significant bugs this workaround caused: - Broken Schannel TLS 1.3 connections (#9431) - HTTP/2 arbitrary hangs (#10253) The actual code remains though it is disabled by default. Though future changes to connection filter buffering could improve the situation IMO it's just not tenable to manage this workaround. Ref: https://github.com/curl/curl/issues/657 Ref: https://github.com/curl/curl/pull/668 Ref: https://github.com/curl/curl/pull/720 Ref: https://github.com/curl/curl/issues/9431 Ref: https://github.com/curl/curl/issues/10253 Closes https://github.com/curl/curl/pull/10409 Stefan Eissing (8 Feb 2023) - http2: aggregate small SETTINGS/PRIO/WIN_UPDATE frames add a small buffer to nghttp2 session sending in order to aggregate small SETTINGS/PRIO/WIN_UPDATE frames that nghttp2 "writes" to the callback individually. Ref: #10389 Closes #10432 - openssl: store the CA after first send (ClientHello) move Curl_ssl_setup_x509_store() call after the first send (ClientHello) this gives time to parse CA anchors while waiting on the server reply Ref: #10389 Closes #10432 Daniel Stenberg (8 Feb 2023) - RELEASE-NOTES: synced Anthony Hu (8 Feb 2023) - wolfssl: remove deprecated post-quantum algorithms Closes #10440 John Bampton (8 Feb 2023) - misc: fix spelling Closes #10437 Daniel Stenberg (7 Feb 2023) - man pages: call the custom user pointer 'clientp' consistently The variable had a few different names. Now try to use 'clientp' consistently for all man pages using a custom pointer set by the application. Reported-by: Gerrit Renker Fixes #10434 Closes #10435 - vtls: infof using %.*s needs to provide the length as int Fixes a Coverity warning. Closes #10436 Stefan Eissing (7 Feb 2023) - vrls: addressing issues reported by coverity I believe the code was secure before this, but limiting the accepted name length to what is used in the structures should help Coverity's analysis. Closes #10431 Daniel Stenberg (7 Feb 2023) - tool_operate: move the 'updated' variable This was already done by Dan Fandrich in the previous PR but somehow I lost that fixup. Follow-up to 349c5391f2121e Dan Fandrich (7 Feb 2023) - tool_operate: Fix error codes during DOS filename sanitize It would return CURLE_URL_MALFORMAT in an OOM condition. Closes #10414 - tool_operate: Fix error codes on bad URL & OOM curl would erroneously report CURLE_OUT_OF_MEMORY in some cases instead of CURLE_URL_MALFORMAT. In other cases, it would erroneously return CURLE_URL_MALFORMAT instead of CURLE_OUT_OF_MEMORY. Add a test case to test the former condition. Fixes #10130 Closes #10414 Daniel Stenberg (6 Feb 2023) - setopt: use >, not >=, when checking if uarg is larger than uint-max Closes #10421 - vtls: fix failf() format argument type for %.*s handling Reported by Coverity Closes #10422 - openssl: fix "Improper use of negative value" By getting the socket first and returning error in case of bad socket. Detected by Coverity. Closes #10423 Dan Fandrich (6 Feb 2023) - packages: Remove Android.mk from makefile This was missed in commit #44141512 Ref: #10418 Daniel Stenberg (6 Feb 2023) - curl_ws_send.3: clarify how to send multi-frame messages Mike Duglas (6 Feb 2023) - ws: fix multiframe send handling Fixes #10413 Closes #10420 Daniel Stenberg (6 Feb 2023) - unit2600: make sure numerical curl_easy_setopt sets long Follow-up to 671158242db3203 Reported-by: Marcel Raad Fixes #10410 Closes #10419 Andy Alt (6 Feb 2023) - GHA: move Slackware test into matrix Closes #10412 Pronyushkin Petr (6 Feb 2023) - urlapi: fix part of conditional expression is always true: qlen Closes #10408 - url: fix part of conditional expression is always true Closes #10407 Daniel Stenberg (6 Feb 2023) - RELEASE-NOTES: synced Philip Heiduck (6 Feb 2023) - GHA/macos.yml: bump to gcc-12 Closes #10415 Daniel Stenberg (6 Feb 2023) - packages: remove Android, update README - Nobody builds curl for Android using this anymore - Refreshed the README and converted to markdown Reported-by: John Porter Fixes #10416 Closes #10418 Kvarec Lezki (5 Feb 2023) - fopen: remove unnecessary assignment [CWE-1164] V1048: The '* tempname' variable was assigned the same value. Ref: https://pvs-studio.com/en/docs/warnings/v1048/ Closes https://github.com/curl/curl/pull/10398 Gisle Vanem (5 Feb 2023) - libtest: add a sleep macro for Windows .. because sleep() is used in some libtests. Closes https://github.com/curl/curl/pull/10295 Kvarec Lezki (3 Feb 2023) - http_aws_sigv4: remove typecasts from HMAC_SHA256 macro V220: Suspicious sequence of types castings: memsize -> 32-bit integer -> mem size. https://pvs-studio.com/en/docs/warnings/v220/ Closes #10400 Daniel Stenberg (3 Feb 2023) - mailmap: Thomas1664 on github Thomas1664 on github (3 Feb 2023) - CURLOPT_WRITEFUNCTION.3: fix memory leak in example Closes #10390 Kvarec Lezki (3 Feb 2023) - doh: ifdef IPv6 code For disabled IPv6 a condition (conn->ip_version != CURL_IPRESOLVE_V4) is always false. https://pvs-studio.com/en/docs/warnings/v560/ Closes #10397 Daniel Stenberg (3 Feb 2023) - urlapi: remove pathlen assignment "Value stored to 'pathlen' is never read" Follow-up to 804d5293f89 Reported-by: Kvarec Lezki Closes #10405 Kvarec Lezki (3 Feb 2023) - http: fix "part of conditional expression is always false" [CWE-570] V560: A part of conditional expression is always false: conn->bits. authneg. [CWE-570] V560: A part of conditional expression is always false: conn->handl er->protocol & (0 | 0). https://pvs-studio.com/en/docs/warnings/v560/ Closes #10399 Daniel Stenberg (2 Feb 2023) - urlapi: skip the extra dedotdot alloc if no dot in path Saves an allocation for many/most URLs. Updates test 1395 accordingly Closes #10403 Stefan Eissing (2 Feb 2023) - connections: introduce http/3 happy eyeballs New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing. - filter is installed when `--http3` in the tool is used (or the equivalent CURLOPT_ done in the library) - starts a QUIC/HTTP/3 connect right away. Should that not succeed after 100ms (subject to change), a parallel attempt is started for HTTP/2 and HTTP/1.1 via TCP - both attempts are subject to IPv6/IPv4 eyeballing, same as happens for other connections - tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT - use a `soft` timeout at half the value. When the soft timeout expires, the HTTPS-CONNECT filter checks if the QUIC filter has received any data from the server. If not, it will start the HTTP/2 attempt. HTTP/3(ngtcp2) improvements. - setting call_data in all cfilter calls similar to http/2 and vtls filters for use in callback where no stream data is available. - returning CURLE_PARTIAL_FILE for prematurely terminated transfers - enabling pytest test_05 for h3 - shifting functionality to "connect" UDP sockets from ngtcp2 implementation into the udp socket cfilter. Because unconnected UDP sockets are weird. For example they error when adding to a pollset. HTTP/3(quiche) improvements. - fixed upload bug in quiche implementation, now passes 251 and pytest - error codes on stream RESET - improved debug logs - handling of DRAIN during connect - limiting pending event queue HTTP/2 cfilter improvements. - use LOG_CF macros for dynamic logging in debug build - fix CURLcode on RST streams to be CURLE_PARTIAL_FILE - enable pytest test_05 for h2 - fix upload pytests and improve parallel transfer performance. GOAWAY handling for ngtcp2/quiche - during connect, when the remote server refuses to accept new connections and closes immediately (so the local conn goes into DRAIN phase), the connection is torn down and a another attempt is made after a short grace period. This is the behaviour observed with nghttpx when we tell it to shut down gracefully. Tested in pytest test_03_02. TLS improvements - ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, repl aces copy of logic in all tls backends. - standardized the infof logging of offered ALPNs - ALPN negotiated: have common function for all backends that sets alpn propr ty and connection related things based on the negotiated protocol (or lack the reof). - new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementatio n. Invoke: python3 tests/tests-httpd/scorecard.py --help for usage. Improvements on gathering connect statistics and socket access. - new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters report connection statistics. This is triggered when the connection has completely connected. - new void Curl_pgrsTimeWas(..) method to report a timer update with a timestamp of when it happend. This allows for updating timers "later", e.g. a connect statistic after full connectivity has been reached. - in case of HTTP eyeballing, the previous changes will update statistics only from the filter chain that "won" the eyeballing. - new cfilter query CF_QUERY_SOCKET for retrieving the socket used by a filter chain. Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket() for convenient use of this query. - Change VTLS backend to query their sub-filters for the socket when checks during the handshake are made. HTTP/3 documentation on how https eyeballing works. TLS improvements - ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, repl aces copy of logic in all tls backends. - standardized the infof logging of offered ALPNs - ALPN negotiated: have common function for all backends that sets alpn propr ty and connection related things based on the negotiated protocol (or lack the reof). Scorecard with Caddy. - configure can be run with `--with-test-caddy=path` to specify which caddy t o use for testing - tests/tests-httpd/scorecard.py now measures download speeds with caddy pytest improvements - adding Makfile to clean gen dir - adding nghttpx rundir creation on start - checking httpd version 2.4.55 for test_05 cases where it is needed. Skippin g with message if too old. - catch exception when checking for caddy existance on system. Closes #10349 Daniel Stenberg (2 Feb 2023) - CODEOWNERS: remove the peeps mentioned as CI owners These owners do not have the bandwidth/energy to do the reviews which makes PRs stall and this ownership claim flawed. We can bring people back when the situation is different. Follow-up to c04c78ac87c4d46737934345a Closes #10386 Martin D'Aloia (2 Feb 2023) - write-out.d: add 'since version' to %{header_json} documentation The documentation of `%{header_json}` missed to mention since which version this variable for `--write-out` is present. Based on commit https://github.com/curl/curl/commit/4133a69f2daa476bb we can determine from the tags were this commit is present that the first version to include it was `7.83.0`. This could be also checked with: `git tag --contains 4133a69f2daa476bb6d902687f1dd6660ea9c3c5` Closes #10395 Daniel Stenberg (1 Feb 2023) - urlapi: avoid Curl_dyn_addf() for hex outputs Inspired by the recent fixes to escape.c, we should avoid calling Curl_dyn_addf() in loops, perhaps in particular when adding something so simple as %HH codes - for performance reasons. This change makes the same thing for the URL parser's two URL-encoding loops. Closes #10384 - urlapi: skip path checks if path is just "/" As a miniscule optimization, treat a path of the length 1 as the same as non-existing, as it can only be a single leading slash, and that's what we do for no paths as well. Closes #10385 Philip Heiduck (1 Feb 2023) - GHA/macos: use Xcode_14.0.1 for cmake builds Fixes #10356 Closes #10381 Viktor Szakats (1 Feb 2023) - tls: fixes for wolfssl + openssl combo builds 1. Add `USE_WOLFSSL` to the TLS backend priority list in `lib/curl_ntlm_core.c`. 2. Fix `lib/curl_ntlm_core.h` to respect TLS backend priority, bringing it in sync with the above list and `lib/curl_ntlm_core.c` itself. Reported-by: Mark Roszko Ref: https://github.com/curl/curl/issues/10321 3. Allow enabling both wolfSSL and OpenSSL at the same time in `lib/Makefile.mk` bringing this in line with cmake/autotools builds. Update logic to select the crypto-specific lib for `ngtcp2`, which supports a single TLS backend at the same time. Closes #10322 Daniel Stenberg (1 Feb 2023) - RELEASE-NOTES: synced - docs/INSTALL: document how to use multiple TLS backends And document how OpenSSL forks and wolfSSL cannot be used at the same time. Reported-by: Mark Roszko Fixes #10321 Closes #10382 Kvarec Lezki (1 Feb 2023) - cookies: fp is always not NULL Closes #10383 Daniel Stenberg (31 Jan 2023) - escape: use table lookup when adding %-codes to output On my dev host, this code runs 7.8 times faster. Closes #10377 - unit2600: avoid error: ‘TEST_CASES’ defined but not used Follow-up to d55de24dce9d51 Closes #10379 - escape: hex decode with a lookup-table Makes the decoding 2.8 times faster in my tests. Closes #10376 - cf-socket: fix build error wo TCP_FASTOPEN_CONNECT Follow-up to 5651a36d1a Closes #10378 Reviewed-by: Stefan Eissing Stefan Eissing (31 Jan 2023) - CI: add pytest github workflow to CI test/tests-httpd on a HTTP/3 setup Closes #10317 - connect: fix strategy testing for attempts, timeouts and happy-eyeball - add test2600 as a unit test that triggers various connect conditions and monitors behaviour, available in a debug build only. - this exposed edge cases in connect.c that have been fixed Closes #10312 - cf-socket: improvements in socket I/O handling - Curl_write_plain/Curl_read_plain have been eliminated. Last code use now uses Curl_conn_send/recv so that requests use conn->send/revc callbacks which defaults to cfilters use. - Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c. - USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved into cf-socket.c. The pre_recv buffer is held at the socket filter context. `postponed_data` structures have been removed from `connectdata`. - the hanger in HTTP/2 request handling was a result of read buffering on all sends and the multi handling is not prepared for this. The following happens: - multi preforms on a HTTP/2 easy handle - h2 reads and processes data - this leads to a send of h2 data - which receives and buffers before the send - h2 returns - multi selects on the socket, but no data arrives (its in the buffer alre ady) the workaround now receives data in a loop as long as there is something i n the buffer. The real fix would be for multi to change, so that `data_pendi ng` is evaluated before deciding to wait on the socket. io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower filter have pending data. This io_buffer is only available/used when the -DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows configurations. It also maintains the original checks on protocol handler being HTTP and conn->send/recv not being replaced. The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds out that the "lower" filter chain has still pending data at the end of its IO operation. This prevents the processing from becoming stalled. Closes #10280 Daniel Stenberg (31 Jan 2023) - openssl: only use CA_BLOB if verifying peer Reported-by: Paul Groke Bug: https://curl.se/mail/lib-2023-01/0070.html Fixes #10351 Closes #10359 Thomas1664 on github (31 Jan 2023) - curl_free.3: fix return type of `curl_free` Fixes #10373 Closes #10374 Daniel Stenberg (30 Jan 2023) - zuul: stop using this CI service The important jobs have already transitioned. The remaining ones we can skip for now. Closes #10368 - copyright: remove "m4/ax_compile_check_sizeof.m4" from skips and report if skipped files do not exist. Follow-up to 9e11c2791fb960758 which removed the file. Closes #10369 - ws: unstick connect-only shutdown As this mode uses blocking sockets, it must set them back to non-blocking in disconnect to avoid the risk of getting stuck. Closes #10366 - ws: remove bad assert Reported-by: Stanley Wucw Fixes #10347 Closes #10366 - openssl: adapt to boringssl's error code type BoringSSL uses uint32_t, OpenSSL uses 'unsigned 'long' Closes #10360 - tool_operate: repair --rate Regression from a55256cfb242 (7.87.0) Reported-by: highmtworks on github Fixes #10357 Closes #10358 - dict: URL decode the entire path always Reported-by: dekerser on github Fixes #10298 Closes #10354 Stefan Eissing (29 Jan 2023) - vtls: do not null-check when we already assume cf-ctx exists Fixes #10361 Closes #10362 Daniel Stenberg (29 Jan 2023) - RELEASE-NOTES: synced - CURLOPT_READFUNCTION.3: the callback 'size' arg is always 1 Reported-by: Brian Green Fixes #10328 Closes #10355 - copyright.pl: cease doing year verifications As we have (mostly) removed the copyright year ranges. Reported-by: Ryan Schmidt Fixes #10345 Closes #10352 Dan Fandrich (28 Jan 2023) - CI: Work around a labeler bug that removes labels Jay Satiro (26 Jan 2023) - write-out.d: clarify Windows % symbol escaping - Clarify that in Windows batch files the % must be escaped as %%, and at the command prompt it cannot be escaped which could lead to incorrect expansion. Prior to this change the doc implied % must be escaped as %% in win32 always. --- Examples showing how a write-out argument is received by curl: If curl --write-out "%{http_code}" is executed in a batch file: {http_code} If curl --write-out "%%{http_code}" is executed in a batch file: %{http_code} If curl --write-out "%{http_code}" is executed from the command prompt: %{http_code} If curl --write-out "%%{http_code}" is executed from the command prompt: %%{http_code} At the command prompt something like "%{speed_download}%{http_code}" would first be parsed by the command interpreter as %{speed_download}% and would be expanded as environment variable {speed_download} if it existed, though that's highly unlikely since Windows environment names don't use braces. --- Reported-by: Muhammad Hussein Ammari Ref: https://github.com/bagder/everything-curl/pull/279 Fixes https://github.com/curl/curl/issues/10323 Closes https://github.com/curl/curl/pull/10337 Ryan Schmidt (26 Jan 2023) - connect: Fix build when not ENABLE_IPV6 Check for ENABLE_IPV6 before accessing AF_INET6. Fixes build failure introduced in 1c5d8ac. Closes https://github.com/curl/curl/pull/10344 - cf-socket: Fix build when not HAVE_GETPEERNAME Remove remaining references to conn and sockfd, which were removed from the function signature when conninfo_remote was renamed to conn_set_primary_ip in 6a8d7ef. Closes https://github.com/curl/curl/pull/10343 Stefan Eissing (26 Jan 2023) - vtls: Manage current easy handle in nested cfilter calls The previous implementation cleared `data` so the outer invocation lost its data, which could lead to a crash. Bug: https://github.com/curl/curl/issues/10336 Reported-by: Fujii Hironori Closes https://github.com/curl/curl/pull/10340 Dan Fandrich (25 Jan 2023) - CI: Add even more paths to the labeler config (#10326) - scripts: Fix Appveyor job detection in cijobs.pl The reorganization in #9769 broke the script. This should probably be rewritten to use a YAML parser for better upward compatibility. - CI: Add a few more paths to the labeler config (#10326) - CI: Switch the labeler event to pull_request_target Otherwise, the action won't work on PRs from forked repositories (#10326). Viktor Szakats (25 Jan 2023) - cmake: delete redundant macro definition `SECURITY_WIN32` Stop explicitly defining `SECURITY_WIN32` in CMake builds. No other build systems define this macro, because it's unconditionally defined in `lib/curl_sspi.h` already. This is the only curl source using the `sspi.h` and `security.h` Win32 headers, and no other Win32 headers need this macro. Reviewed-by: Jay Satiro Closes #10341 Fredrik (24 Jan 2023) - winbuild: document that arm64 is supported Building an arm64 version works flawlessly with the VS arm64 toolset. Closes https://github.com/curl/curl/pull/10332 Cherish98 (24 Jan 2023) - openssl: don't log raw record headers - Skip content type SSL3_RT_HEADER in verbose TLS output. This commit prevents bogus and misleading verbose TLS header messages as discussed in #10299. Assisted-by: Peter Wu Closes https://github.com/curl/curl/pull/10299 Marc Aldorasi (24 Jan 2023) - cmake: use list APPEND syntax for CMAKE_REQUIRED_DEFINITIONS - Use list() instead of set() for CMAKE_REQUIRED_DEFINITIONS list since the former is clearer. Closes https://github.com/curl/curl/pull/10272 Dan Fandrich (23 Jan 2023) - CI: Add a workflow to automatically label pull requests The labeler language is quite restrictive right now so labels are added quite conservatively, meaning that many PRs won't get labels when it's "obvious" they should. It will still save some manual work on those that it can label. Jay Satiro (21 Jan 2023) - system.h: assume OS400 is always built with ILEC compiler Prior to this change the OS400 types were only defined when __ILEC400__. That symbol is only defined by IBM's C compiler and not their C++ compiler, which led to missing types when users on OS400 would compile a C++ application that included curl. The IBM C and C++ compilers are the only native compilers on the platform. Assisted-by: Jon Rumsey Reported-by: John Sherrill Fixes https://github.com/curl/curl/issues/10305 Closes https://github.com/curl/curl/pull/10329 xgladius (20 Jan 2023) - cmake: Remove deprecated symbols check curl stopped use of CMAKE_USE_ as a prefix for its own build symbols in 2021 and added a check, meant to last 1 year, to fatally error on those symbols. This commit removes that check. Closes https://github.com/curl/curl/pull/10314 Dan Fandrich (20 Jan 2023) - docs: POSTFIELDSIZE must be set to -1 with read function Reported-by: RanBarLavie on github Closes #10313 Stefan Eissing (20 Jan 2023) - vtls: fix hostname handling in filters - Copy the hostname and dispname to ssl_connect_data. Use a copy instead of referencing the `connectdata` instance since this may get free'ed on connection reuse. Reported-by: Stefan Talpalaru Reported-by: sergio-nsk@users.noreply.github.com Fixes https://github.com/curl/curl/issues/10273 Fixes https://github.com/curl/curl/issues/10309 Closes https://github.com/curl/curl/pull/10310 Sergey Bronnikov (17 Jan 2023) - lib: fix typos Closes https://github.com/curl/curl/pull/10307 - curl_version_info.3: fix typo Closes https://github.com/curl/curl/pull/10306 Jay Satiro (17 Jan 2023) - openssl: Don't ignore CA paths when using Windows CA store (redux) .. and remove 'experimental' designation from CURLSSLOPT_NATIVE_CA. This commit restores the behavior of CURLSSLOPT_NATIVE_CA so that it does not override CURLOPT_CAINFO / CURLOPT_CAPATH, or the hardcoded default locations. Instead the native Windows CA store can be used at the same time. --- This behavior was originally added over two years ago in abbc5d60 (#5585) but then 83393b1a (#7892) broke it over a year ago, I assume inadvertently. The CURLSSLOPT_NATIVE_CA feature was marked experimental and likely rarely used. Ref: https://github.com/curl/curl/pull/5585 Ref: https://github.com/curl/curl/pull/7892 Ref: https://curl.se/mail/lib-2023-01/0019.html Closes https://github.com/curl/curl/pull/10244 Daniel Stenberg (13 Jan 2023) - RELEASE-NOTES: synced - ws: fix autoping handling Reported-by: Alexey Savchuk Fixes #10289 Closes #10294 - curl_log: avoid printf() format checking with mingw Since it does not seem to like %zu and more Follow-up to db91dbbf2 Fixes #10291 Closes #10292 - tool_getparam: fix compiler warning when !HAVE_WRITABLE_ARGV Follow-up to 2ed0e1f70ee176edf3d2 Closes #10286 Stefan Eissing (12 Jan 2023) - openssl: make the BIO_METHOD a local variable in the connection filter This avoids UAF issues when `curl_global_cleanup()` is called before all transfers have been completely handled. Unfortunately this seems to be a more common pattern than we like. Closes #10285 Daniel Stenberg (12 Jan 2023) - curl: output warning at --verbose output for debug-enabled version + a libcurl warning in the debug output Assisted-by: Jay Satiro Ref: https://curl.se/mail/lib-2023-01/0039.html Closes #10278 - src: add --http3-only Warning: --http3 and --http3-only are subject to change again (or be removed) before HTTP/3 support goes non-experimental. Closes #10264 - curl.h: add CURL_HTTP_VERSION_3ONLY As the previous CURL_HTTP_VERSION_3 option gets a slightly altered meaning. Closes #10264 - connect: fix access of pointer before NULL check Detected by Coverity CID 1518992 Closes #10284 Daniel Gustafsson (12 Jan 2023) - easyoptions: Fix header printing in generation script The optiontable.pl script prints the header comment when generating easyoptions.c, but it wasn't escaping all characters which jumbled the curl ascii logo. Fix by escaping. Cloes #10275 Harry Sintonen (12 Jan 2023) - tool_getparam: fix hiding of command line secrets Closes #10276 Stefan Eissing (12 Jan 2023) - tests: document the cfilter debug logging options Closes #10283 - curl_log: for failf/infof and debug logging implementations - new functions and macros for cfilter debugging - set CURL_DEBUG with names of cfilters where debug logging should be enabled - use GNUC __attribute__ to enable printf format checks during compile Closes #10271 Daniel Stenberg (10 Jan 2023) - RELEASE-NOTES: synced Nick Banks (10 Jan 2023) - msh3: update to v0.6 Closes #10192 Stefan Eissing (10 Jan 2023) - ngtcp2: add CURLOPT_SSL_CTX_FUNCTION support for openssl+wolfssl Using common method for SSL_CTX initialization of verfiy peer and CA settings. This also provides X509_STORE sharing to become available for ngtcp2+openssl HTTP/3. Reported-by: violetlige on github Fixes #10222 Closes #10239 Daniel Stenberg (10 Jan 2023) - cf-socket: make infof() call use %zu for size_t output Detected by Coverity CID 1518986 and CID 1518984 Closes #10268 Jon Rumsey (10 Jan 2023) - os400: fixes to make-lib.sh and initscript.sh Adjust how exports list is generated from header files to account for declarations across multiple lines and CURL_DEPRECATED(...) tags. Update initscript.sh Specify qadrt_use_inline to prevent unistd.h in ASCII runtime defining close(a) -> close_a(a) Fixes #10266 Closes #10267 Stefan Eissing (9 Jan 2023) - tests-httpd: basic infra to run curl against an apache httpd plus nghttpx for h3 - adding '--with-test-httpd=<path>' to configure non-standard apache2 install - python env and base classes for running httpd - basic tests for connectivity with h1/h2/h3 - adding test cases for truncated responses in http versions. - adding goaway test for HTTP/3. - adding "stuttering" tests with parallel downloads in chunks with varying delays between chunks. - adding a curltest module to the httpd server, adding GOAWAY test. - mod_curltest now installs 2 handlers - 'echo': writing as response body what came as request body - 'tweak': with query parameters to tweak response behaviour - marked known fails as skip for now Closes #10175 - quic: improve connect error message, debugging info, fix false connect report - ECONNECTREFUSED has not its own fail message in quic filters - Debug logging in connect eyballing improved - Fix bug in ngtcp2/quiche that could lead to false success reporting. Reported-by: Divy Le Ray Fixes #10245 Closes #10248 - quiche: fix build without any HTTP/2 implementation Fixes #10260 Closes #10263 Daniel Stenberg (9 Jan 2023) - .github/workflows/linux.yml: add a quiche CI job Move over from zuul Closes #10241 - curl.h: allow up to 10M buffer size Bump the limit from 512K. There might be reasons for applications using h3 to set larger buffers and there is no strong reason for curl to have a very small maximum. Ref: https://curl.se/mail/lib-2023-01/0026.html Closes #10256 Tatsuhiro Tsujikawa (8 Jan 2023) - GHA: use designated ngtcp2 and its dependencies versions Designate ngtcp2 and its dependency versions so that the CI build does not fail without our control. Closes #10257 Daniel Stenberg (8 Jan 2023) - docs/cmdline-opts/hsts.d: explain hsts more Closes #10258 Stefan Eissing (8 Jan 2023) - msh3: run again in its cfilter - test 2500, single GET works - test 2501, single POST stalls - test 2502, multiple, sequential GETs each use a new connection since MsH3ConnectionGetState(qconn) no longer reports CONNECTED after one GET. Closes #10204 Jay Satiro (8 Jan 2023) - sendf: fix build for Linux TCP fastopen - Fix the remote addr struct dereference. - Include cf-socket.h in urldata.h. Follow-up to 6a8d7ef9 which changed conn->ipaddr (Curl_addrinfo* ) member to conn->remote_addr (Curl_sockaddr_ex *) several days ago. Reported-by: Stephan Guilloux Fixes https://github.com/curl/curl/issues/10249 Closes https://github.com/curl/curl/pull/10250 Daniel Stenberg (7 Jan 2023) - RELEASE-NOTES: synced - setopt: move the SHA256 opt within #ifdef libssh2 Because only the libssh2 backend not supports it and thus this should return error if this option is used other backends. Reported-by: Harry Sintonen Closes #10255 Patrick Monnerat (7 Jan 2023) - nss: implement data_pending method NSS currently uses the default Curl_none_data_pending() method which always returns false, causing TLS buffered input data to be missed. The current commit implements the nss_data_pending() method that properly monitors the presence of available TLS data. Ref:#10077 Closes #10225 Jay Satiro (6 Jan 2023) - CURLOPT_HEADERDATA.3: warn DLL users must set write function - Warn that in Windows if libcurl is running from a DLL and if CURLOPT_HEADERDATA is set then CURLOPT_WRITEFUNCTION or CURLOPT_HEADERFUNCTION must be set as well, otherwise the user may experience crashes. We already have a similar warning in CURLOPT_WRITEDATA. Basically, in Windows libcurl could crash writing a FILE pointer that was created by a different C runtime. In Windows each DLL that is part of a program may or may not have its own C runtime. Ref: https://github.com/curl/curl/issues/10231 Closes https://github.com/curl/curl/pull/10233 Jon Rumsey (5 Jan 2023) - x509asn1: fix compile errors and warnings Various small issues when built for GSKit Closes #10238 Patrick Monnerat (5 Jan 2023) - runtests: fix detection of TLS backends Built-in TLS backends are detected at test time by scanning for their names in the version string line returned by the cli tool: as this line may also list the libssh configuration that mentions its own backend, the curl backend may be wrongly determined. In example, if the version line contains "libssh/0.10.4/openssl/zlib", OpenSSL is detected as a curl-configured backend even if not. This fix requires the backend names to appear as full words preceded by spacing in the version line to be recognized as curl TLS backends. Closes #10236 Andy Alt (5 Jan 2023) - GHA: add job on Slackware 15.0 Closes #10230 Daniel Stenberg (5 Jan 2023) - test363: make even smaller writes to loop more - http_proxy: do not assign data->req.p.http use local copy Avoid the tricky reusing of the data->req.p.http pointer for http proxy tunneling. Fixes #10194 Closes #10234 Stefan Eissing (5 Jan 2023) - quic: rename vquic implementations, fix for quiche build. - quiche in debug mode did not build, fixed. - moved all vquic implementation files to prefix curl_* to avoid the potential mixups between provided .h files and our own. - quich passes test 2500 and 2502. 2501, the POST, fail with the body being rejected. Quich bug? Closes #10242 - sectransp: fix for incomplete read/writes SecureTransport expects result code errSSLWouldBlock when the requested length could not be sent/recieved in full. The previous code returned noErr, which let SecureTransport to believe that the IO had terminated prematurely. Fixes #10227 Closes #10235 Andy Alt (5 Jan 2023) - GHA: Hacktoberfest CI: Update deprecated 'set-output' command Closes #10221 Jay Satiro (5 Jan 2023) - scripts: set file mode +x on all perl and shell scripts - Set all scripts +x, ie 644 => 755. Prior to this change some scripts were not executable and therefore could not be called directly. ~~~ git ls-files -s \*.{sh,pl,py} | grep -v 100755 ~~~ Closes https://github.com/curl/curl/pull/10219 Stefan Eissing (4 Jan 2023) - tool_operate: fix headerfile writing Do not rely on the first transfer started to be the first to get a response (remember -Z). All transfers now write the headefile (-D) in append mode, making sure that the order of transfer responses does not lead to overwrites of previous data. Closes #10224 Daniel Stenberg (4 Jan 2023) - misc: reduce struct and struct field sizes - by using BIT() instead of bool - imap: shrink struct - ftp: make state 'unsigned char' - ftp: sort ftp_conn struct entries on size - urldata: use smaller fields for SSL version info storage - pop3: reduce the pop3_conn struct size - smtp: reduce the size of the smtp structs Closes #10186 - noproxy: support for space-separated names is deprecated To be removed in July 2024. Assisted-by: Michael Osipov Fixes #10209 Closes #10215 Andrei Rybak (4 Jan 2023) - lib: fix typos in comments which repeat a word Remove erroneously duplicated words in code comments of files `lib.connect.c` and `lib/url.c`. Closes #10220 Radek Brich (3 Jan 2023) - cmake: set SOVERSION also for macOS Closes #10214 Jay Satiro (3 Jan 2023) - http2: fix compiler warning due to uninitialized variable Prior to this change http2_cfilter_add could return an uninitialized cfilter pointer in an OOM condition. In this case though, the pointer is discarded and not dereferenced so there was no risk of a crash.