????

Your IP : 3.139.104.140


Current Path : /proc/thread-self/root/proc/self/root/opt/bitninja-waf/embedded/include/
Upload File :
Current File : //proc/thread-self/root/proc/self/root/opt/bitninja-waf/embedded/include/luaconf.h

/*
** $Id: luaconf.h,v 1.238 2014/12/29 13:27:55 roberto Exp $
** Configuration file for Lua
** See Copyright Notice in lua.h
*/


#ifndef luaconf_h
#define luaconf_h

#include <limits.h>
#include <stddef.h>


/*
** ===================================================================
** Search for "@@" to find all configurable definitions.
** ===================================================================
*/


/*
** {====================================================================
** System Configuration: macros to adapt (if needed) Lua to some
** particular platform, for instance compiling it with 32-bit numbers or
** restricting it to C89.
** =====================================================================
*/

/*
@@ LUA_32BITS enables Lua with 32-bit integers and 32-bit floats. You
** can also define LUA_32BITS in the make file, but changing here you
** ensure that all software connected to Lua will be compiled with the
** same configuration.
*/
/* #define LUA_32BITS */


/*
@@ LUA_USE_C89 controls the use of non-ISO-C89 features.
** Define it if you want Lua to avoid the use of a few C99 features
** or Windows-specific features on Windows.
*/
/* #define LUA_USE_C89 */


/*
** By default, Lua on Windows use (some) specific Windows features
*/
#if !defined(LUA_USE_C89) && defined(_WIN32) && !defined(_WIN32_WCE)
#define LUA_USE_WINDOWS  /* enable goodies for regular Windows */
#endif


#if defined(LUA_USE_WINDOWS)
#define LUA_DL_DLL	/* enable support for DLL */
#define LUA_USE_C89	/* broadly, Windows is C89 */
#endif


#if defined(LUA_USE_LINUX)
#define LUA_USE_POSIX
#define LUA_USE_DLOPEN		/* needs an extra library: -ldl */
#define LUA_USE_READLINE	/* needs some extra libraries */
#endif


#if defined(LUA_USE_MACOSX)
#define LUA_USE_POSIX
#define LUA_USE_DLOPEN		/* MacOS does not need -ldl */
#define LUA_USE_READLINE	/* needs an extra library: -lreadline */
#endif


/*
@@ LUA_C89_NUMBERS ensures that Lua uses the largest types available for
** C89 ('long' and 'double'); Windows always has '__int64', so it does
** not need to use this case.
*/
#if defined(LUA_USE_C89) && !defined(LUA_USE_WINDOWS)
#define LUA_C89_NUMBERS
#endif



/*
@@ LUAI_BITSINT defines the (minimum) number of bits in an 'int'.
*/
/* avoid undefined shifts */
#if ((INT_MAX >> 15) >> 15) >= 1
#define LUAI_BITSINT	32
#else
/* 'int' always must have at least 16 bits */
#define LUAI_BITSINT	16
#endif


/*
@@ LUA_INT_INT / LUA_INT_LONG / LUA_INT_LONGLONG defines the type for
** Lua integers.
@@ LUA_REAL_FLOAT / LUA_REAL_DOUBLE / LUA_REAL_LONGDOUBLE defines
** the type for Lua floats.
** Lua should work fine with any mix of these options (if supported
** by your C compiler). The usual configurations are 64-bit integers
** and 'double' (the default), 32-bit integers and 'float' (for
** restricted platforms), and 'long'/'double' (for C compilers not
** compliant with C99, which may not have support for 'long long').
*/

#if defined(LUA_32BITS)		/* { */
/*
** 32-bit integers and 'float'
*/
#if LUAI_BITSINT >= 32  /* use 'int' if big enough */
#define LUA_INT_INT
#else  /* otherwise use 'long' */
#define LUA_INT_LONG
#endif
#define LUA_REAL_FLOAT

#elif defined(LUA_C89_NUMBERS)	/* }{ */
/*
** largest types available for C89 ('long' and 'double')
*/
#define LUA_INT_LONG
#define LUA_REAL_DOUBLE

#else				/* }{ */
/*
** default configuration for 64-bit Lua ('long long' and 'double')
*/
#define LUA_INT_LONGLONG
#define LUA_REAL_DOUBLE

#endif								/* } */

/* }================================================================== */




/*
** {==================================================================
** Configuration for Paths.
** ===================================================================
*/

/*
@@ LUA_PATH_DEFAULT is the default path that Lua uses to look for
** Lua libraries.
@@ LUA_CPATH_DEFAULT is the default path that Lua uses to look for
** C libraries.
** CHANGE them if your machine has a non-conventional directory
** hierarchy or if you want to install your libraries in
** non-conventional directories.
*/
#define LUA_VDIR	LUA_VERSION_MAJOR "." LUA_VERSION_MINOR
#if defined(_WIN32) 	/* { */
/*
** In Windows, any exclamation mark ('!') in the path is replaced by the
** path of the directory of the executable file of the current process.
*/
#define LUA_LDIR	"!\\lua\\"
#define LUA_CDIR	"!\\"
#define LUA_SHRDIR	"!\\..\\share\\lua\\" LUA_VDIR "\\"
#define LUA_PATH_DEFAULT  \
		LUA_LDIR"?.lua;"  LUA_LDIR"?\\init.lua;" \
		LUA_CDIR"?.lua;"  LUA_CDIR"?\\init.lua;" \
		LUA_SHRDIR"?.lua;" LUA_SHRDIR"?\\init.lua;" \
		".\\?.lua;" ".\\?\\init.lua"
#define LUA_CPATH_DEFAULT \
		LUA_CDIR"?.dll;" \
		LUA_CDIR"..\\lib\\lua\\" LUA_VDIR "\\?.dll;" \
		LUA_CDIR"loadall.dll;" ".\\?.dll"

#else			/* }{ */

#define LUA_ROOT	"/usr/local/"
#define LUA_LDIR	LUA_ROOT "share/lua/" LUA_VDIR "/"
#define LUA_CDIR	LUA_ROOT "lib/lua/" LUA_VDIR "/"
#define LUA_PATH_DEFAULT  \
		LUA_LDIR"?.lua;"  LUA_LDIR"?/init.lua;" \
		LUA_CDIR"?.lua;"  LUA_CDIR"?/init.lua;" \
		"./?.lua;" "./?/init.lua"
#define LUA_CPATH_DEFAULT \
		LUA_CDIR"?.so;" LUA_CDIR"loadall.so;" "./?.so"
#endif			/* } */


/*
@@ LUA_DIRSEP is the directory separator (for submodules).
** CHANGE it if your machine does not use "/" as the directory separator
** and is not Windows. (On Windows Lua automatically uses "\".)
*/
#if defined(_WIN32)
#define LUA_DIRSEP	"\\"
#else
#define LUA_DIRSEP	"/"
#endif

/* }================================================================== */


/*
** {==================================================================
** Marks for exported symbols in the C code
** ===================================================================
*/

/*
@@ LUA_API is a mark for all core API functions.
@@ LUALIB_API is a mark for all auxiliary library functions.
@@ LUAMOD_API is a mark for all standard library opening functions.
** CHANGE them if you need to define those functions in some special way.
** For instance, if you want to create one Windows DLL with the core and
** the libraries, you may want to use the following definition (define
** LUA_BUILD_AS_DLL to get it).
*/
#if defined(LUA_BUILD_AS_DLL)	/* { */

#if defined(LUA_CORE) || defined(LUA_LIB)	/* { */
#define LUA_API __declspec(dllexport)
#else						/* }{ */
#define LUA_API __declspec(dllimport)
#endif						/* } */

#else				/* }{ */

#define LUA_API		extern

#endif				/* } */


/* more often than not the libs go together with the core */
#define LUALIB_API	LUA_API
#define LUAMOD_API	LUALIB_API


/*
@@ LUAI_FUNC is a mark for all extern functions that are not to be
** exported to outside modules.
@@ LUAI_DDEF and LUAI_DDEC are marks for all extern (const) variables
** that are not to be exported to outside modules (LUAI_DDEF for
** definitions and LUAI_DDEC for declarations).
** CHANGE them if you need to mark them in some special way. Elf/gcc
** (versions 3.2 and later) mark them as "hidden" to optimize access
** when Lua is compiled as a shared library. Not all elf targets support
** this attribute. Unfortunately, gcc does not offer a way to check
** whether the target offers that support, and those without support
** give a warning about it. To avoid these warnings, change to the
** default definition.
*/
#if defined(__GNUC__) && ((__GNUC__*100 + __GNUC_MINOR__) >= 302) && \
    defined(__ELF__)		/* { */
#define LUAI_FUNC	__attribute__((visibility("hidden"))) extern
#else				/* }{ */
#define LUAI_FUNC	extern
#endif				/* } */

#define LUAI_DDEC	LUAI_FUNC
#define LUAI_DDEF	/* empty */

/* }================================================================== */


/*
** {==================================================================
** Compatibility with previous versions
** ===================================================================
*/

/*
@@ LUA_COMPAT_5_2 controls other macros for compatibility with Lua 5.2.
@@ LUA_COMPAT_5_1 controls other macros for compatibility with Lua 5.1.
** You can define it to get all options, or change specific options
** to fit your specific needs.
*/
#if defined(LUA_COMPAT_5_2)	/* { */

/*
@@ LUA_COMPAT_MATHLIB controls the presence of several deprecated
** functions in the mathematical library.
*/
#define LUA_COMPAT_MATHLIB

/*
@@ LUA_COMPAT_BITLIB controls the presence of library 'bit32'.
*/
#define LUA_COMPAT_BITLIB

/*
@@ LUA_COMPAT_IPAIRS controls the effectiveness of the __ipairs metamethod.
*/
#define LUA_COMPAT_IPAIRS

/*
@@ LUA_COMPAT_APIINTCASTS controls the presence of macros for
** manipulating other integer types (lua_pushunsigned, lua_tounsigned,
** luaL_checkint, luaL_checklong, etc.)
*/
#define LUA_COMPAT_APIINTCASTS


/*
@@ LUA_COMPAT_FLOATSTRING makes Lua format integral floats without a
@@ a float mark ('.0').
** This macro is not on by default even in compatibility mode,
** because this is not really an incompatibility.
*/
/* #define LUA_COMPAT_FLOATSTRING */

#endif				/* } */


#if defined(LUA_COMPAT_5_1)	/* { */

/*
@@ LUA_COMPAT_UNPACK controls the presence of global 'unpack'.
** You can replace it with 'table.unpack'.
*/
#define LUA_COMPAT_UNPACK

/*
@@ LUA_COMPAT_LOADERS controls the presence of table 'package.loaders'.
** You can replace it with 'package.searchers'.
*/
#define LUA_COMPAT_LOADERS

/*
@@ macro 'lua_cpcall' emulates deprecated function lua_cpcall.
** You can call your C function directly (with light C functions).
*/
#define lua_cpcall(L,f,u)  \
	(lua_pushcfunction(L, (f)), \
	 lua_pushlightuserdata(L,(u)), \
	 lua_pcall(L,1,0,0))


/*
@@ LUA_COMPAT_LOG10 defines the function 'log10' in the math library.
** You can rewrite 'log10(x)' as 'log(x, 10)'.
*/
#define LUA_COMPAT_LOG10

/*
@@ LUA_COMPAT_LOADSTRING defines the function 'loadstring' in the base
** library. You can rewrite 'loadstring(s)' as 'load(s)'.
*/
#define LUA_COMPAT_LOADSTRING

/*
@@ LUA_COMPAT_MAXN defines the function 'maxn' in the table library.
*/
#define LUA_COMPAT_MAXN

/*
@@ The following macros supply trivial compatibility for some
** changes in the API. The macros themselves document how to
** change your code to avoid using them.
*/
#define lua_strlen(L,i)		lua_rawlen(L, (i))

#define lua_objlen(L,i)		lua_rawlen(L, (i))

#define lua_equal(L,idx1,idx2)		lua_compare(L,(idx1),(idx2),LUA_OPEQ)
#define lua_lessthan(L,idx1,idx2)	lua_compare(L,(idx1),(idx2),LUA_OPLT)

/*
@@ LUA_COMPAT_MODULE controls compatibility with previous
** module functions 'module' (Lua) and 'luaL_register' (C).
*/
#define LUA_COMPAT_MODULE

#endif				/* } */

/* }================================================================== */



/*
** {==================================================================
** Configuration for Numbers.
** Change these definitions if no predefined LUA_REAL_* / LUA_INT_*
** satisfy your needs.
** ===================================================================
*/

/*
@@ LUA_NUMBER is the floating-point type used by Lua.
**
@@ LUAI_UACNUMBER is the result of an 'usual argument conversion'
@@ over a floating number.
**
@@ LUA_NUMBER_FRMLEN is the length modifier for writing floats.
@@ LUA_NUMBER_FMT is the format for writing floats.
@@ lua_number2str converts a float to a string.
**
@@ l_mathop allows the addition of an 'l' or 'f' to all math operations.
**
@@ lua_str2number converts a decimal numeric string to a number.
*/

#if defined(LUA_REAL_FLOAT)		/* { single float */

#define LUA_NUMBER	float

#define LUAI_UACNUMBER	double

#define LUA_NUMBER_FRMLEN	""
#define LUA_NUMBER_FMT		"%.7g"

#define l_mathop(op)		op##f

#define lua_str2number(s,p)	strtof((s), (p))


#elif defined(LUA_REAL_LONGDOUBLE)	/* }{ long double */

#define LUA_NUMBER	long double

#define LUAI_UACNUMBER	long double

#define LUA_NUMBER_FRMLEN	"L"
#define LUA_NUMBER_FMT		"%.19Lg"

#define l_mathop(op)		op##l

#define lua_str2number(s,p)	strtold((s), (p))

#elif defined(LUA_REAL_DOUBLE)		/* }{ double */

#define LUA_NUMBER	double

#define LUAI_UACNUMBER	double

#define LUA_NUMBER_FRMLEN	""
#define LUA_NUMBER_FMT		"%.14g"

#define l_mathop(op)		op

#define lua_str2number(s,p)	strtod((s), (p))

#else					/* }{ */

#error "numeric real type not defined"

#endif					/* } */


#define l_floor(x)		(l_mathop(floor)(x))

#define lua_number2str(s,n)	sprintf((s), LUA_NUMBER_FMT, (n))


/*
@@ lua_numbertointeger converts a float number to an integer, or
** returns 0 if float is not within the range of a lua_Integer.
** (The range comparisons are tricky because of rounding. The tests
** here assume a two-complement representation, where MININTEGER always
** has an exact representation as a float; MAXINTEGER may not have one,
** and therefore its conversion to float may have an ill-defined value.)
*/
#define lua_numbertointeger(n,p) \
  ((n) >= (LUA_NUMBER)(LUA_MININTEGER) && \
   (n) < -(LUA_NUMBER)(LUA_MININTEGER) && \
      (*(p) = (LUA_INTEGER)(n), 1))


/*
@@ The luai_num* macros define the primitive operations over numbers.
** They should work for any size of floating numbers.
*/

/* the following operations need the math library */
#if defined(lobject_c) || defined(lvm_c)
#include <math.h>

/* floor division (defined as 'floor(a/b)') */
#define luai_numidiv(L,a,b)	((void)L, l_mathop(floor)(luai_numdiv(L,a,b)))

/*
** module: defined as 'a - floor(a/b)*b'; the previous definition gives
** NaN when 'b' is huge, but the result should be 'a'. 'fmod' gives the
** result of 'a - trunc(a/b)*b', and therefore must be corrected when
** 'trunc(a/b) ~= floor(a/b)'. That happens when the division has a
** non-integer negative result, which is equivalent to the test below
*/
#define luai_nummod(L,a,b,m)  \
  { (m) = l_mathop(fmod)(a,b); if ((m)*(b) < 0) (m) += (b); }

/* exponentiation */
#define luai_numpow(L,a,b)	((void)L, l_mathop(pow)(a,b))

#endif

/* these are quite standard operations */
#if defined(LUA_CORE)
#define luai_numadd(L,a,b)	((a)+(b))
#define luai_numsub(L,a,b)	((a)-(b))
#define luai_nummul(L,a,b)	((a)*(b))
#define luai_numdiv(L,a,b)	((a)/(b))
#define luai_numunm(L,a)	(-(a))
#define luai_numeq(a,b)		((a)==(b))
#define luai_numlt(a,b)		((a)<(b))
#define luai_numle(a,b)		((a)<=(b))
#define luai_numisnan(a)	(!luai_numeq((a), (a)))
#endif


/*
@@ LUA_INTEGER is the integer type used by Lua.
**
@@ LUA_UNSIGNED is the unsigned version of LUA_INTEGER.
**
@@ LUAI_UACINT is the result of an 'usual argument conversion'
@@ over a lUA_INTEGER.
@@ LUA_INTEGER_FRMLEN is the length modifier for reading/writing integers.
@@ LUA_INTEGER_FMT is the format for writing integers.
@@ LUA_MAXINTEGER is the maximum value for a LUA_INTEGER.
@@ LUA_MININTEGER is the minimum value for a LUA_INTEGER.
@@ lua_integer2str converts an integer to a string.
*/


/* The following definitions are good for most cases here */

#define LUA_INTEGER_FMT		"%" LUA_INTEGER_FRMLEN "d"
#define lua_integer2str(s,n)	sprintf((s), LUA_INTEGER_FMT, (n))

#define LUAI_UACINT		LUA_INTEGER

/*
** use LUAI_UACINT here to avoid problems with promotions (which
** can turn a comparison between unsigneds into a signed comparison)
*/
#define LUA_UNSIGNED		unsigned LUAI_UACINT


/* now the variable definitions */

#if defined(LUA_INT_INT)		/* { int */

#define LUA_INTEGER		int
#define LUA_INTEGER_FRMLEN	""

#define LUA_MAXINTEGER		INT_MAX
#define LUA_MININTEGER		INT_MIN

#elif defined(LUA_INT_LONG)	/* }{ long */

#define LUA_INTEGER		long
#define LUA_INTEGER_FRMLEN	"l"

#define LUA_MAXINTEGER		LONG_MAX
#define LUA_MININTEGER		LONG_MIN

#elif defined(LUA_INT_LONGLONG)	/* }{ long long */

#if defined(LLONG_MAX)		/* { */
/* use ISO C99 stuff */

#define LUA_INTEGER		long long
#define LUA_INTEGER_FRMLEN	"ll"

#define LUA_MAXINTEGER		LLONG_MAX
#define LUA_MININTEGER		LLONG_MIN

#elif defined(LUA_USE_WINDOWS) /* }{ */
/* in Windows, can use specific Windows types */

#define LUA_INTEGER		__int64
#define LUA_INTEGER_FRMLEN	"I64"

#define LUA_MAXINTEGER		_I64_MAX
#define LUA_MININTEGER		_I64_MIN

#else				/* }{ */

#error "Compiler does not support 'long long'. Use option '-DLUA_32BITS' \
  or '-DLUA_C89_NUMBERS' (see file 'luaconf.h' for details)"

#endif				/* } */

#else				/* }{ */

#error "numeric integer type not defined"

#endif				/* } */

/* }================================================================== */


/*
** {==================================================================
** Dependencies with C99
** ===================================================================
*/

/*
@@ lua_strx2number converts an hexadecimal numeric string to a number.
** In C99, 'strtod' does both conversions. Otherwise, you can
** leave 'lua_strx2number' undefined and Lua will provide its own
** implementation.
*/
#if !defined(LUA_USE_C89)
#define lua_strx2number(s,p)	lua_str2number(s,p)
#endif


/*
@@ LUA_USE_AFORMAT allows '%a'/'%A' specifiers in 'string.format'
** Enable it if the C function 'printf' supports these specifiers.
** (C99 demands it and Windows also supports it.)
*/
#if !defined(LUA_USE_C89) || defined(LUA_USE_WINDOWS)
#define LUA_USE_AFORMAT
#endif


/*
** 'strtof' and 'opf' variants for math functions are not valid in
** C89. Otherwise, the macro 'HUGE_VALF' is a good proxy for testing the
** availability of these variants. ('math.h' is already included in
** all files that use these macros.)
*/
#if defined(LUA_USE_C89) || (defined(HUGE_VAL) && !defined(HUGE_VALF))
#undef l_mathop  /* variants not available */
#undef lua_str2number
#define l_mathop(op)		(lua_Number)op  /* no variant */
#define lua_str2number(s,p)	((lua_Number)strtod((s), (p)))
#endif


/*
@@ LUA_KCONTEXT is the type of the context ('ctx') for continuation
** functions.  It must be a numerical type; Lua will use 'intptr_t' if
** available, otherwise it will use 'ptrdiff_t' (the nearest thing to
** 'intptr_t' in C89)
*/
#define LUA_KCONTEXT	ptrdiff_t

#if !defined(LUA_USE_C89) && defined(__STDC_VERSION__) && \
    __STDC_VERSION__ >= 199901L
#include <stdint.h>
#if defined (INTPTR_MAX)  /* even in C99 this type is optional */
#undef LUA_KCONTEXT
#define LUA_KCONTEXT	intptr_t
#endif
#endif

/* }================================================================== */


/*
** {==================================================================
** Macros that affect the API and must be stable (that is, must be the
** same when you compile Lua and when you compile code that links to
** Lua). You probably do not want/need to change them.
** =====================================================================
*/

/*
@@ LUAI_MAXSTACK limits the size of the Lua stack.
** CHANGE it if you need a different limit. This limit is arbitrary;
** its only purpose is to stop Lua from consuming unlimited stack
** space (and to reserve some numbers for pseudo-indices).
*/
#if LUAI_BITSINT >= 32
#define LUAI_MAXSTACK		1000000
#else
#define LUAI_MAXSTACK		15000
#endif

/* reserve some space for error handling */
#define LUAI_FIRSTPSEUDOIDX	(-LUAI_MAXSTACK - 1000)


/*
@@ LUA_EXTRASPACE defines the size of a raw memory area associated with
** a Lua state with very fast access.
** CHANGE it if you need a different size.
*/
#define LUA_EXTRASPACE		(sizeof(void *))


/*
@@ LUA_IDSIZE gives the maximum size for the description of the source
@@ of a function in debug information.
** CHANGE it if you want a different size.
*/
#define LUA_IDSIZE	60


/*
@@ LUAI_MAXSHORTLEN is the maximum length for short strings, that is,
** strings that are internalized. (Cannot be smaller than reserved words
** or tags for metamethods, as these strings must be internalized;
** #("function") = 8, #("__newindex") = 10.)
*/
#define LUAI_MAXSHORTLEN        40


/*
@@ LUAL_BUFFERSIZE is the buffer size used by the lauxlib buffer system.
** CHANGE it if it uses too much C-stack space.
*/
#define LUAL_BUFFERSIZE	((int)(0x80 * sizeof(void*) * sizeof(lua_Integer)))

/* }================================================================== */


/*
@@ LUA_QL describes how error messages quote program elements.
** Lua does not use these macros anymore; they are here for
** compatibility only.
*/
#define LUA_QL(x)	"'" x "'"
#define LUA_QS		LUA_QL("%s")




/* =================================================================== */

/*
** Local configuration. You can use this space to add your redefinitions
** without modifying the main part of the file.
*/





#endif