????
Your IP : 3.144.18.59
#!/bin/bash
##############################################################################
# Switch between Apache and LiteSpeed Web Server under control panel environment
#
# @author LiteSpeed Technologies, Inc. (https://www.litespeedtech.com)
# @copyright (c) 2016-2023
##############################################################################
check_errs()
{
if [ "$1" -ne 0 ] ; then
echo "[ERROR] ${2}"
exit "$1"
fi
}
display_usage()
{
cat <<EOF
cp_switch_ws.sh - Switch between Apache and LiteSpeed under control panel environments.
Currently supported control panels are cPanel, Plesk, DirectAdmin, and CentOS Web Panel.
CustomBuild 2.0 is required to be installed prior for DirectAdmin detection.
Usage: cp_switch_ws.sh apache|lsws
Param: targeted web server. Fixed value either "apache" or "lsws"
EOF
exit 1
}
detect_control_panel()
{
# detect cPanel
if [ -d "/usr/local/cpanel/whostmgr" ] ; then
CP="WHM"
cp_init_var
echo "Detected cPanel WHM Environment"
# detect Plesk
elif [ -e "/opt/psa/version" ] || [ -e "/usr/local/psa/version" ] ; then
CP="PSA"
cp_init_var
echo "Detected Plesk Environment"
# detect DirectAdmin
elif [ -d "/usr/local/directadmin" ] ; then
CP="DA"
DA_DIR="/usr/local/directadmin/custombuild"
echo "Detected DirectAdmin Environment"
# detect CentOS Web Panel
elif [ -d "/usr/local/cwpsrv" ] ; then
CP="CWP"
echo "Detected CentOS Web Panel Environment"
else
check_errs 1 "Cannot detect control panel environment. Only cPanel WHM, Plesk, DirectAdmin are checked for now."
fi
}
cp_SetRunOnBoot()
{
local chkconfigPath
chkconfigPath=$(which chkconfig)
$chkconfigPath lsws off
$chkconfigPath httpd on
return 0
}
cp_msg_exit()
{
echo "$2"
exit "${1}"
}
cp_init_var()
{
OS=$(uname -s)
if [ "x$OS" = "xFreeBSD" ] || [ "x$OS" = "xDarwin" ] ; then
PS_CMD="ps -ax"
else
PS_CMD="ps -ef"
fi
if [ "x$OS" = "xFreeBSD" ] ; then
LSWS_CTLCMD="/usr/local/etc/rc.d/lsws.sh"
AP_CTLCMD="/usr/local/etc/rc.d/httpd"
else
LSWS_CTLCMD="/sbin/service lsws"
AP_CTLCMD="/sbin/service httpd"
fi
LSWS_PIDFILE="/tmp/lshttpd/lshttpd.pid"
CONF="${LSWSHOME}/conf/httpd_config.xml"
AP_PROC="httpd"
LSWS_SWITCH_FLAG="${LSWSHOME}/admin/tmp/.switched2lsws"
if [ "$CP" = "PSA" ] && [ -e "/etc/debian_version" ] ; then
LSWS_CTLCMD="/usr/sbin/service lsws"
AP_CTLCMD="/usr/sbin/service apache2"
AP_PROC="apache2"
if ! . "/etc/apache2/envvars" 2>/dev/null; then
. "/etc/apache2/envvars"
fi
AP_PIDFILE="$APACHE_PID_FILE"
fi
}
cp_stop_lsws()
{
if [ "$CP" = "WHM" ] ; then
pkill wswatch.sh 2>/dev/null
fi
$LSWS_CTLCMD stop
$AP_CTLCMD stop 1>/dev/null 2>&1
RETRY=30
LSPID=1
while [ $RETRY -gt 0 ] && [ $LSPID -ne 0 ]
do
((RETRY--))
sleep 1
cp_detect_lsws_pid
done
if [ $LSPID -eq 0 ] ; then
pkill -9 lshttpd
pkill -9 litespeed
echo "LiteSpeed Stopped."
else
echo "LiteSpeed is still running. Fail to stop within 30 secs."
echo "Will use pkill command to stop"
pkill -9 lshttpd
pkill -9 litespeed
sleep 1
cp_detect_lsws_pid
if [ $LSPID -eq 0 ] ; then
echo "LiteSpeed Stopped."
else
echo "LiteSpeed is still running. Fail to stop using kill command."
fi
fi
}
cp_detect_lsws_pid()
{
LSPID=0
if [ -f "$LSWS_PIDFILE" ] ; then
FPID=$(cat "$LSWS_PIDFILE")
if [ "x$FPID" != "x" ] ; then
PL=$($PS_CMD | grep -w 'lshttpd\|litespeed' | grep -v grep | grep -w "$FPID")
if [ "x$PL" != "x" ] ; then
LSPID=$FPID
fi
fi
fi
}
#
# start LiteSpeed
#
cp_start_fake_apache()
{
$AP_CTLCMD start 2>&1
RETRY=30
LSPID=0
while [ $RETRY -gt 0 ] && [ $LSPID -eq 0 ]
do
((RETRY--))
sleep 1
cp_detect_lsws_pid
done
}
remove_bak_bak()
{
if [ -f "$1$2" ]; then
mv "$1$2" "$1$2_restore_done"
fi
}
cpanel_apache_wrapper_helper()
{
RESTORE=$1
NEED_PROTECT=$(/usr/local/cpanel/3rdparty/bin/perl -MCpanel::Config::Httpd::Perms -e'print Cpanel::Config::Httpd::Perms::webserver_runs_as_user();')
if [ "$RESTORE" -eq 1 ] ; then
# restore Apache binary Files
if [ -f "/usr/local/apache/bin/${AP_PROC}_ls_bak" ] ; then
mv -f "/usr/local/apache/bin/${AP_PROC}_ls_bak" "/usr/local/apache/bin/${AP_PROC}"
elif [ -f "/usr/local/apache/bin/${AP_PROC}_ls_bak_bak" ] ; then
cp -f "/usr/local/apache/bin/${AP_PROC}_ls_bak_bak" "/usr/local/apache/bin/${AP_PROC}"
fi
remove_bak_bak "/usr/local/apache/bin/${AP_PROC}" "_ls_bak_bak"
if [ -f "/usr/sbin/${AP_PROC}_ls_bak" ] ; then
mv -f "/usr/sbin/${AP_PROC}_ls_bak" "/usr/sbin/${AP_PROC}"
elif [ -f "/usr/sbin/${AP_PROC}_ls_bak_bak" ] ; then
cp -f "/usr/sbin/${AP_PROC}_ls_bak_bak" "/usr/sbin/${AP_PROC}"
fi
remove_bak_bak "/usr/sbin/${AP_PROC}" "_ls_bak_bak"
if [ -f "/scripts/restartsrv_httpd_ls_bak" ] ; then
mv -f "/scripts/restartsrv_httpd_ls_bak" "/scripts/restartsrv_httpd"
elif [ -f "/scripts/restartsrv_httpd_ls_bak_bak" ] ; then
cp -f "/scripts/restartsrv_httpd_ls_bak_bak" "/scripts/restartsrv_httpd"
fi
remove_bak_bak "/scripts/restartsrv_httpd" "_ls_bak_bak"
if [ "$NEED_PROTECT" -eq 1 ] ; then
/scripts/enablefileprotect
echo "Added fileprotect for Apache"
fi
if [ ! -f "/etc/cpanel/ea4/paths.conf" ] || ! grep -q '[^[:space:]]' /etc/cpanel/ea4/paths.conf ; then
if [ -f '/etc/cpanel/ea4/paths.conf_ls_bak' ]; then
mv '/etc/cpanel/ea4/paths.conf_ls_bak' '/etc/cpanel/ea4/paths.conf'
fi
fi
if [ -f "/etc/cpanel/ea4/paths.conf" ]; then
sed -i -e 's#/usr/local/lsws/bin/lswsctrl#/usr/sbin/apachectl#' /etc/cpanel/ea4/paths.conf
fi
# restore rc file
if [ "$SYSTEMDDIR" != "" ]; then
if [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then
mv -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" "${SYSTEMDDIR}/${AP_PROC}.service"
elif [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" ] ; then
cp -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" "${SYSTEMDDIR}/${AP_PROC}.service"
fi
remove_bak_bak "${SYSTEMDDIR}/${AP_PROC}.service" ".ls_bak_bak"
systemctl daemon-reload
fi
if [ "$INIT_DIR" != "" ]; then
if [ -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then
mv -f "${INIT_DIR}/${AP_PROC}.ls_bak" "${INIT_DIR}/${AP_PROC}"
elif [ -e "${INIT_DIR}/${AP_PROC}.ls_bak_bak" ] ; then
cp -f "${INIT_DIR}/${AP_PROC}.ls_bak_bak" "${INIT_DIR}/${AP_PROC}"
fi
remove_bak_bak "${INIT_DIR}/${AP_PROC}" ".ls_bak_bak"
fi
if [ -f "$LSWS_SWITCH_FLAG" ] ; then
/bin/rm -f "$LSWS_SWITCH_FLAG"
fi
else
if [ "$NEED_PROTECT" -eq 1 ] ; then
/scripts/disablefileprotect
echo "fileprotect removed, not needed by LiteSpeed"
fi
if [ ! -f "/etc/cpanel/ea4/paths.conf" ] || ! grep -q '[^[:space:]]' /etc/cpanel/ea4/paths.conf ; then
if [ -f '/etc/cpanel/ea4/paths.conf_ls_bak' ]; then
mv '/etc/cpanel/ea4/paths.conf_ls_bak' '/etc/cpanel/ea4/paths.conf'
fi
fi
if [ -f "/etc/cpanel/ea4/paths.conf" ]; then
sed -i -e 's#/usr/sbin/apachectl#/usr/local/lsws/bin/lswsctrl#' /etc/cpanel/ea4/paths.conf
fi
# add rc wrapper
if [ "$SYSTEMDDIR" != "" ] ; then
# copy the correct file again to avoid wrong data
"${LSWSHOME}/admin/misc/rc-inst.sh"
if [ ! -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then
mv -f "${SYSTEMDDIR}/${AP_PROC}.service" "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak"
fi
ln -sf "${SYSTEMDDIR}/lshttpd.service" "${SYSTEMDDIR}/${AP_PROC}.service"
systemctl daemon-reload
fi
if [ "$INIT_DIR" != "" ] ; then
if [ ! -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then
mv -f "${INIT_DIR}/${AP_PROC}" "${INIT_DIR}/${AP_PROC}.ls_bak"
fi
ln -sf ./lsws "${INIT_DIR}/${AP_PROC}"
fi
# set flag
touch "$LSWS_SWITCH_FLAG"
fi
}
plesk_apache_wrapper_helper()
{
RESTORE=$1
if [ "$RESTORE" -eq 1 ] ; then
# restore Apache binary Files
if [ -f "/usr/sbin/${AP_PROC}_ls_bak" ] ; then
mv -f "/usr/sbin/${AP_PROC}_ls_bak" "/usr/sbin/${AP_PROC}"
elif [ -f "/usr/sbin/${AP_PROC}_ls_bak_bak" ] ; then
cp -f "/usr/sbin/${AP_PROC}_ls_bak_bak" "/usr/sbin/${AP_PROC}"
fi
remove_bak_bak "/usr/sbin/${AP_PROC}" "_ls_bak_bak"
# restore rc file
if [ "$SYSTEMDDIR" != "" ]; then
if [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then
mv -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" "${SYSTEMDDIR}/${AP_PROC}.service"
elif [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" ] ; then
cp -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" "${SYSTEMDDIR}/${AP_PROC}.service"
fi
remove_bak_bak "${SYSTEMDDIR}/${AP_PROC}.service" ".ls_bak_bak"
if [ -d "${SYSTEMDDIR}/lshttpd.service.d" ]; then
mv -f "${SYSTEMDDIR}/lshttpd.service.d" "${SYSTEMDDIR}/${AP_PROC}.service.d"
fi
if [ -d "${SYSTEMDDIR}/${AP_PROC}.service.d.ls_bak" ]; then
mv -f "${SYSTEMDDIR}/${AP_PROC}.service.d.ls_bak" "${SYSTEMDDIR}/${AP_PROC}.service.d"
fi
if [ -d "/etc/systemd/system/${AP_PROC}.service.d.ls_bak" ]; then
mv -f "/etc/systemd/system/${AP_PROC}.service.d.ls_bak" "/etc/systemd/system/${AP_PROC}.service.d"
fi
systemctl daemon-reload
systemctl disable lshttpd
systemctl enable ${AP_PROC}
fi
if [ "$INIT_DIR" != "" ] ; then
if [ -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then
mv -f "${INIT_DIR}/${AP_PROC}.ls_bak" "${INIT_DIR}/${AP_PROC}"
elif [ -e "${INIT_DIR}/${AP_PROC}.ls_bak_bak" ] ; then
cp -f "${INIT_DIR}/${AP_PROC}.ls_bak_bak" "${INIT_DIR}/${AP_PROC}"
fi
remove_bak_bak "${INIT_DIR}/${AP_PROC}" ".ls_bak_bak"
if [ "$SYSTEMDDIR" != "" ] ; then
systemctl daemon-reload
fi
fi
if [ -f "$LSWS_SWITCH_FLAG" ] ; then
/bin/rm -f "$LSWS_SWITCH_FLAG"
fi
else
# add rc wrapper
if [ "$SYSTEMDDIR" != "" ] ; then
if [ ! -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then
systemctl disable ${AP_PROC}
systemctl enable lshttpd
mv -f "${SYSTEMDDIR}/${AP_PROC}.service" "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak"
fi
ln -sf "${SYSTEMDDIR}/lshttpd.service" "${SYSTEMDDIR}/${AP_PROC}.service"
if [ -d "${SYSTEMDDIR}/${AP_PROC}.service.d" ]; then
mv -f "${SYSTEMDDIR}/${AP_PROC}.service.d" "${SYSTEMDDIR}/${AP_PROC}.service.d.ls_bak"
fi
if [ -d "/etc/systemd/system/${AP_PROC}.service.d" ]; then
mv -f "/etc/systemd/system/${AP_PROC}.service.d" "/etc/systemd/system/${AP_PROC}.service.d.ls_bak"
fi
systemctl daemon-reload
fi
if [ "$INIT_DIR" != "" ] ; then
if [ ! -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then
mv -f "${INIT_DIR}/${AP_PROC}" "${INIT_DIR}/${AP_PROC}.ls_bak"
fi
cp "${INIT_DIR}/lsws" "${INIT_DIR}/${AP_PROC}"
#ln -sf ./lsws "${INIT_DIR}/${AP_PROC}"
if [ "$SYSTEMDDIR" != "" ] ; then
systemctl daemon-reload
fi
fi
# set flag
touch "$LSWS_SWITCH_FLAG"
fi
}
cp_apache_wrapper()
{
RESTORE=$1
INIT_DIR=""
for path in "/etc/init.d" "/etc/rc.d/init.d"
do
if [ "$INIT_DIR" = "" ] \
&& { [ -e "${path}/${AP_PROC}" ] || [ -e "${path}/${AP_PROC}.ls_bak" ] ;}
then
INIT_DIR="$path"
fi
done
# use systemd if possible, need to use same method as apache
SYSTEMDDIR=""
for path in "/usr/lib/systemd/system" "/lib/systemd/system" "/etc/systemd/system"
do
if [ "$SYSTEMDDIR" = "" ] \
&& [ -d "$path" ] \
&& [ -e "${path}/${AP_PROC}.service" ] ; then
SYSTEMDDIR="$path"
fi
done
if [ "$CP" = "WHM" ] ; then
cpanel_apache_wrapper_helper "$RESTORE"
elif [ "$CP" = "PSA" ] ; then
plesk_apache_wrapper_helper "$RESTORE"
fi
}
cp_detect_ap_pid()
{
APPID=0
FPID=$($PS_CMD | grep -w "${AP_PROC} \|${AP_PROC}$\|^${AP_PROC}$" \
| grep -v "lscgid\|litespeed\|lshttpd\|grep\|/usr/bin/logger" | grep -w "root" \
| awk '{print $2}')
if [ "x$FPID" != "x" ] ; then
APPID=$FPID
fi
}
cp_stop_apache()
{
$AP_CTLCMD stop
RETRY=30
APPID=1
while [ $RETRY -gt 0 ] && [ $APPID -ne 0 ]
do
((RETRY--))
sleep 1
cp_detect_ap_pid
done
if [ $APPID -eq 0 ] ; then
echo "Apache Stopped."
else
echo "Apache is still running. Fail to stop within 30 secs."
echo "Will use pkill command to stop"
pkill -9 $AP_PROC
sleep 1
cp_detect_ap_pid
if [ $APPID -eq 0 ] ; then
echo "Apache Stopped."
else
echo "Apache is still running. Fail to stop using kill command."
fi
fi
}
cp_change_port_offset()
{
PORT_OFFSET=$1
if [ ! -f "$CONF" ] ; then
check_errs 1 "${0}: invalid conf file directory!"
fi
/bin/cp -f "$CONF" "${CONF}.orig"
sed -e "s/<apachePortOffset>.*<\/apachePortOffset>/<apachePortOffset>${PORT_OFFSET}<\/apachePortOffset>/" "${CONF}.orig" > "$CONF"
check_errs $? "${0}: sed command error, please try to modify apache port offset manually from config file ${CONF}"
/bin/rm -f "${CONF}.orig"
}
cp_SwitchToLiteSpeed()
{
cp_change_port_offset 0
cp_stop_apache
if [ "$CP" = "WHM" ] ; then
#sleep 8
pkill -9 httpd
elif [ "$CP" = "PSA" ] ; then
cp_detect_lsws_pid
fi
cp_apache_wrapper 0
if [ "$CP" = "WHM" ] ; then
/usr/local/cpanel/bin/whmapi1 configureservice service=httpd enabled=1 monitored=1
fi
cp_start_fake_apache
if [ $LSPID -gt 0 ] ; then
if [ "$CP" = "WHM" ] ; then
pkill wswatch.sh 2>/dev/null
cd /usr/local/lsws/logs
nohup ../bin/wswatch.sh </dev/null >/dev/null 2>&1 &
fi
cp_msg_exit 0 "LiteSpeed started successfully."
fi
echo "LiteSpeed is not up within 30 secs, try again by removing /tmp/lshttpd/."
pkill -9 lshttpd
pkill -9 litespeed
/bin/rm -rf "/tmp/lshttpd"
cp_start_fake_apache
# wrapper needs to run after lsws start
if [ $LSPID -gt 0 ] ; then
if [ "$CP" = "WHM" ] ; then
pkill wswatch.sh 2>/dev/null
cd /usr/local/lsws/logs
nohup ../bin/wswatch.sh 2>/dev/null &
fi
cp_msg_exit 0 "LiteSpeed started successfully."
else
cp_apache_wrapper 1
check_errs 1 "LiteSpeed is not up within 60 secs, please check the error log and try again."
fi
}
cp_SwitchToApache()
{
if [ "$CP" = "WHM" ] ; then
pkill wswatch.sh 2>/dev/null
fi
cp_detect_lsws_pid
if [ $LSPID -gt 0 ] ; then
echo "LiteSpeed is running, stop it first."
cp_stop_lsws
if [ $LSPID -gt 0 ] ; then
check_errs 1 "Abort."
fi
fi
cp_detect_ap_pid
if [ $APPID -gt 0 ] ; then
if [ ! -f "$LSWS_SWITCH_FLAG" ] ; then
return
fi
# if running, stop first
cp_stop_apache
fi
# restore Apache Files, wrapper needs to run before Apache start
cp_apache_wrapper 1
# wait 1 sec before start apache
sleep 1
if [ "$CP" = "WHM" ] ; then
/usr/local/cpanel/bin/whmapi1 configureservice service=httpd enabled=1 monitored=1
#
# start Apache
#
# does not change the memory limits, does not work well.
# $AP_CTLCMD start
#
# call a cPanel script
/scripts/restartsrv_httpd
elif [ "$CP" = "PSA" ] ; then
$AP_CTLCMD start 2>&1
fi
RETRY=30
APPID=0
while [ $RETRY -gt 0 ] && [ $APPID -eq 0 ]
do
cp_detect_ap_pid
((RETRY--))
sleep 1
done
if [ $APPID -ne 0 ] ; then
cp_msg_exit 0 "Apache started successfully."
else
check_errs 1 "Apache is not up within 30 secs. Please check the log file."
fi
}
switch_cp()
{
if [ "x$1" = "xapache" ] ; then
cp_SwitchToApache
cp_SetRunOnBoot
elif [ "x$1" = "xlsws" ] ; then
cp_SwitchToLiteSpeed
cp_SetRunOnBoot
fi
}
switch_da()
{
cd ${DA_DIR}
pmod1=$(grep "php1_mode" /usr/local/directadmin/custombuild/options.conf | cut -d = -f 2 | xargs)
pmod2=$(grep "php2_mode" /usr/local/directadmin/custombuild/options.conf | cut -d = -f 2 | xargs)
pmod3=$(grep "php3_mode" /usr/local/directadmin/custombuild/options.conf | cut -d = -f 2 | xargs)
pmod4=$(grep "php4_mode" /usr/local/directadmin/custombuild/options.conf | cut -d = -f 2 | xargs)
if [ "x$1" = "xapache" ] ; then
pkill wswatch.sh
./build set webserver apache
OS_NAME=$(awk '{print $1}' < /etc/redhat-release)
if [ "${OS_NAME}" == 'CloudLinux' ] ; then
./build set php1_mode lsphp
./build set php2_mode lsphp
./build set php3_mode lsphp
./build set php4_mode lsphp
else
./build set php1_mode php-fpm
./build set php2_mode php-fpm
./build set php3_mode php-fpm
./build set php4_mode php-fpm
fi
./build set mod_ruid2 no
./build apache
else
./build set webserver litespeed
if [ "x$pmod1" != "xlsphp" ] ; then
./build set php1_mode lsphp
if [ "x$pmod2" != "xlsphp" ] ; then
./build set php2_mode lsphp
fi
if [ "x$pmod3" != "xlsphp" ] ; then
./build set php3_mode lsphp
fi
if [ "x$pmod4" != "xlsphp" ] ; then
./build set php4_mode lsphp
fi
fi
./build litespeed
fi
}
switch_cwp()
{
if [ "x$1" = "xapache" ] ; then
pkill wswatch.sh
stop_running_ws
echo "Starting Apache..."
if [ -e "/usr/local/apache/bin/httpd_ls_bak" ] ; then
mv /usr/local/apache/bin/httpd_ls_bak /usr/local/apache/bin/httpd
fi
service_manager "start" "httpd"
echo "Apache has been started successfully."
elif [ "x$1" = "xlsws" ] ; then
stop_running_ws
echo "Starting LiteSpeed Enterprise..."
service_manager "start" "lsws"
echo "LiteSpeed Enterprise has been started successfully."
fi
}
service_manager()
{
if [ -d "/etc/systemd" ] ; then
systemctl "$1" "$2" > /dev/null 2>&1
else
service "$2" "$1" > /dev/null 2>&1
fi
}
stop_running_ws()
{
local AP_PIDFILE=/usr/local/apache/logs/httpd.pid
local LSWS_PIDFILE=/tmp/lshttpd/lshttpd.pid
if [ -e "$AP_PIDFILE" ] ; then
local AP_PID
AP_PID=$(cat $AP_PIDFILE)
fi
if [ -e "$LSWS_PIDFILE" ] ; then
local LSWS_PID
LSWS_PID=$(cat $LSWS_PIDFILE)
fi
if [ -e "$LSWS_PIDFILE" ] && [ "$(ps -ef | grep -w 'lshttpd\|litespeed' | grep -v grep | grep -w "$LSWS_PID")" != "" ] || [ "$(ps -ef | grep -w 'lshttpd\|litespeed' | grep -v grep)" != "" ] ; then
echo "Stopping LiteSpeed Enterprise..."
service_manager "stop" "lsws"
sleep 1
RETRY=30
CHECK=$(ps -ef | grep -w 'lshttpd\|litespeed' | grep -v grep)
while [ "$RETRY" -gt 0 ] && [ "$CHECK" != "" ] ; do
RETRY=$((RETRY-1))
sleep 1
CHECK=$(ps -ef | grep -w 'lshttpd\|litespeed' | grep -v grep)
done
pkill -9 lsphp > /dev/null 2>&1
if [ "$CHECK" != "" ] ; then
pkill -9 litespeed > /dev/null 2>&1
pkill -9 lshttpd > /dev/null 2>&1
pkill -9 lscgid > /dev/null 2>&1
sleep 1
fi
if [ "$(ps -ef | grep -w 'lshttpd\|litespeed' | grep -v grep)" != "" ] ; then
echo "LiteSpeed Enterprise could not be stopped."
exit 1
else
echo "LiteSpeed Enterprise has been stopped successfully."
fi
fi
if [ -e "$AP_PIDFILE" ] && [ "$(ps -ef | grep -w "$AP_PID" | grep httpd | grep -v grep | grep -v lscgid)" != "" ] || [ "$(ps -ef | grep httpd | grep -v grep | grep -v lscgid)" != "" ] ; then
echo "Stopping Apache..."
service_manager "stop" "httpd"
sleep 1
RETRY=30
CHECK=$(ps -ef | grep httpd | grep -v grep | grep -v lscgid)
while [ "$RETRY" -gt 0 ] && [ "$CHECK" != "" ] ; do
((RETRY--))
sleep 1
CHECK=$(ps -ef | grep httpd | grep -v grep | grep -v lscgid)
done
if [ "$CHECK" != "" ] ; then
pkill -9 httpd > /dev/null 2>&1
sleep 1
fi
if [ "$(ps -ef | grep httpd | grep -v grep | grep -v lscgid)" != "" ] ; then
echo "Apache could not be stopped."
exit 1
else
echo "Apache killed successfully."
fi
fi
}
INST_USER=$(id)
INST_UID=$(expr "$INST_USER" : 'uid=\(.*\)(.*) gid=.*')
INST_USER=$(expr "$INST_USER" : 'uid=.*(\(.*\)) gid=.*')
if [ "$INST_UID" -ne 0 ]; then
check_errs 1 "Only root user can switch web server!"
fi
if [ $# -ne 1 ] ; then
echo "Illegal parameters = $# !"
display_usage
fi
# set LSWSHOME
cd "$(dirname "$0")"
CURDIR=$(pwd)
LSWSHOME=$(dirname "$(dirname "$CURDIR")")
if [ "x$1" != "xapache" ] && [ "x$1" != "xlsws" ] ; then
display_usage
fi
detect_control_panel
if [ "$CP" = "WHM" ] || [ "$CP" = "PSA" ] ; then
switch_cp "$1"
elif [ "$CP" = "DA" ] ; then
switch_da "$1"
elif [ "$CP" = "CWP" ] ; then
switch_cwp "$1"
fi