????
Your IP : 3.139.239.25
| Current Path : /usr/bin/ |
|
|
| Current File : //usr/bin/zgrep |
#!/bin/sh
# zgrep -- a wrapper around a grep program that decompresses files as needed
# Adapted from a version sent by Charles Levert <charles@comm.polymtl.ca>
# Copyright (C) 1998, 2001-2002, 2006-2007, 2009-2018 Free Software Foundation,
# Inc.
# Copyright (C) 1993 Jean-loup Gailly
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
grep='${GREP-'\''/usr/bin/grep'\''}'
version='zgrep (gzip) 1.9
Copyright (C) 2010-2017 Free Software Foundation, Inc.
This is free software. You may redistribute copies of it under the terms of
the GNU General Public License <https://www.gnu.org/licenses/gpl.html>.
There is NO WARRANTY, to the extent permitted by law.
Written by Jean-loup Gailly.'
usage="Usage: $0 [OPTION]... [-e] PATTERN [FILE]...
Look for instances of PATTERN in the input FILEs, using their
uncompressed contents if they are compressed.
OPTIONs are the same as for 'grep', except that the following 'grep'
options are not supported: --dereference-recursive (-R), --directories (-d),
--exclude, --exclude-from, --exclude-dir, --include, --null (-Z),
--null-data (-z), and --recursive (-r).
Report bugs to <bug-gzip@gnu.org>."
# sed script to escape all ' for the shell, and then (to handle trailing
# newlines correctly) append ' to the last line.
escape='
s/'\''/'\''\\'\'''\''/g
$s/$/'\''/
'
operands=
have_pat=0
files_with_matches=0
files_without_matches=0
no_filename=0
with_filename=0
pattmp=
while test $# -ne 0; do
option=$1
shift
optarg=
case $option in
(-[0123456789EFGHIKLPRTUVZabchilnoqrsuvwxyz]*[!0123456789]*)
arg2=-\'$(expr "X$option" : 'X-.[0-9]*\(.*\)' | sed "$escape")
eval "set -- $arg2 "'${1+"$@"}'
option=$(expr "X$option" : 'X\(-.[0-9]*\)');;
(--binary-*=* | --[lm]a*=* | --reg*=*)
;;
(-[ABCDXdefm] | binary-* | --file | --[lm]a* | --reg*)
case ${1?"$option option requires an argument"} in
(*\'*)
optarg=" '"$(printf '%s\n' "$1" | sed "$escape");;
(*)
optarg=" '$1'";;
esac
shift;;
(-f?*\'*)
optarg=" '"$(expr "X$option" : 'X-f\(.*\)' | sed "$escape")
option=-f;;
(-f?*)
optarg=" '"$(expr "X$option" : 'X-f\(.*\)')\'
option=-f;;
(--file=*\'*)
optarg=" '"$(expr "X$option" : 'X--file=\(.*\)' | sed "$escape")
option=--file;;
(--file=*)
optarg=" '"$(expr "X$option" : 'X--file=\(.*\)')\'
option=--file;;
(--)
break;;
(-?*)
;;
(*)
case $option in
(*\'*)
operands="$operands '"$(printf '%s\n' "$option" | sed "$escape");;
(*)
operands="$operands '$option'";;
esac
${POSIXLY_CORRECT+break}
continue;;
esac
case $option in
(-[drRzZ] | --di* | --exc* | --inc* | --rec* | --nu*)
printf >&2 '%s: %s: option not supported\n' "$0" "$option"
exit 2;;
(-e* | --reg*)
have_pat=1;;
(-f | --file)
# The pattern is coming from a file rather than the command-line.
# If the file is actually stdin then we need to do a little
# magic, since we use stdin to pass the gzip output to grep.
# Similarly if it is not a regular file, since it might be read repeatedly.
# In either of these two cases, copy the pattern into a temporary file,
# and use that file instead. The pattern might contain null bytes,
# so we cannot simply switch to -e here.
if case $optarg in
(" '-'" | " '/dev/stdin'" | " '/dev/fd/0'")
:;;
(*)
eval "test ! -f$optarg";;
esac
then
if test -n "$pattmp"; then
eval "cat --$optarg" >>"$pattmp" || exit 2
continue
fi
trap '
test -n "$pattmp" && rm -f "$pattmp"
(exit 2); exit 2
' HUP INT PIPE TERM 0
case $TMPDIR in
/ | /*/) ;;
/*) TMPDIR=$TMPDIR/;;
*) TMPDIR=/tmp/;;
esac
if type mktemp >/dev/null 2>&1; then
pattmp=$(mktemp "${TMPDIR}zgrepXXXXXXXXX") || exit 2
else
set -C
pattmp=${TMPDIR}zgrep$$
fi
eval "cat --$optarg" >"$pattmp" || exit 2
optarg=' "$pattmp"'
fi
have_pat=1;;
(--h | --he | --hel | --help)
printf '%s\n' "$usage" || exit 2
exit;;
(-H | --wi | --wit | --with | --with- | --with-f | --with-fi \
| --with-fil | --with-file | --with-filen | --with-filena | --with-filenam \
| --with-filename)
with_filename=1
continue;;
(-l | --files-with-*)
files_with_matches=1;;
(-L | --files-witho*)
files_without_matches=1;;
(-h | --no-f*)
no_filename=1;;
(-V | --v | --ve | --ver | --vers | --versi | --versio | --version)
printf '%s\n' "$version" || exit 2
exit;;
esac
case $option in
(*\'?*)
option=\'$(printf '%s\n' "$option" | sed "$escape");;
(*)
option="'$option'";;
esac
grep="$grep $option$optarg"
done
eval "set -- $operands "'${1+"$@"}'
if test $have_pat -eq 0; then
case ${1?"missing pattern; try \`$0 --help' for help"} in
(*\'*)
grep="$grep -- '"$(printf '%s\n' "$1" | sed "$escape");;
(*)
grep="$grep -- '$1'";;
esac
shift
fi
if test $# -eq 0; then
set -- -
fi
exec 3>&1
res=1
for i
do
# Fail if gzip or grep (or sed) fails.
gzip_status=$(
exec 5>&1
(gzip -cdfq -- "$i" 5>&-; echo $? >&5) 3>&- |
if test $files_with_matches -eq 1; then
eval "$grep" >/dev/null && { printf '%s\n' "$i" || exit 2; }
elif test $files_without_matches -eq 1; then
eval "$grep" >/dev/null || {
r=$?
if test $r -eq 1; then
printf '%s\n' "$i" || r=2
fi
test 256 -le $r && r=$(expr 128 + $r % 128)
exit $r
}
elif test $with_filename -eq 0 &&
{ test $# -eq 1 || test $no_filename -eq 1; }; then
eval "$grep"
else
case $i in
(*'
'* | *'&'* | *'\'* | *'|'*)
icolon=$(printf '%s\n' "$i:" |
sed -e 's/[&\|]/\\&/g' -e '$!s/$/\\/');;
(*) icolon="$i:";;
esac
sed_script="s|^|$icolon|"
# Fail if grep or sed fails.
r=$(
exec 4>&1
(eval "$grep" 4>&-; echo $? >&4) 3>&- | sed "$sed_script" >&3 4>&-
) || { r=$?; test $r -lt 2 && r=2; }
test 256 -le $r && r=$(expr 128 + $r % 128)
exit $r
fi >&3 5>&-
)
r=$?
# Ignore gzip status 2, as it is just a warning.
# gzip status 1 is an error, like grep status 2.
test $gzip_status -eq 2 && gzip_status=0
test $gzip_status -eq 1 && gzip_status=2
# Use the more serious of the grep and gzip statuses.
test $r -lt $gzip_status && r=$gzip_status
# Accumulate the greatest status, except consider 0 to be greater than 1.
if test $r -le 1 && test $res -le 1; then
test $r -lt $res
else
test $res -lt $r
fi && res=$r
# Exit immediately on a serious error.
test 126 -le $res && break
done
if test -n "$pattmp"; then
rm -f "$pattmp" || {
r=$?
test $r -lt 2 && r=2
test $res -lt $r && res=$r
}
trap - HUP INT PIPE TERM 0
fi
test 128 -le $res && kill -$(expr $res % 128) $$
exit $res